Bioremediation of chlorobenzene-contaminated ground water in an in situ reactor mediated by hydrogen peroxide

New in situ reactive barrier technologies were tested nearby a local aquifer in Bitterfeld, Saxonia-Anhalt, Germany, which is polluted mainly by chlorobenzene (CB), in concentrations up to 450 microM. A reactor filled with original aquifer sediment was designed for the microbiological remediation of the ground water by indigenous bacterial communities. Two remediation variants were examined: (a) the degradation of CB under anoxic conditions in the presence of nitrate; (b) the degradation of CB under mixed electron acceptor conditions (oxygen+nitrate) using hydrogen peroxide as the oxygen-releasing compound. Under anoxic conditions, no definite degradation of CB was observed. Adding hydrogen peroxide (2.94 mM) and nitrate (2 mM) led to the disappearance of CB (ca. 150 microM) in the lower part of the reactor, accompanied by a strong increase of the number of cultivable aerobic CB degrading bacteria in reactor water and sediment samples, indicating that CB was degraded mainly by productive bacterial metabolism. Several aerobic CB degrading bacteria, mostly belonging to the genera Pseudomonas and Rhodococcus, were isolated from reactor water and sediments. In laboratory experiments with reactor water, oxygen was rapidly released by hydrogen peroxide, whereas biotic-induced decomposition reactions of hydrogen peroxide were almost four times faster than abiotic-induced decomposition reactions. A clear chemical degradation of CB mediated by hydrogen peroxide was not observed. CB was also completely degraded in the reactor after reducing the hydrogen peroxide concentration to 880 microM. The CB degradation completely collapsed after reducing the hydrogen peroxide concentration to 440 microM. In the following, the hydrogen peroxide concentrations were increased again (to 880 microM, 2.94 mM, and 880 microM, respectively), but the oxygen demand for CB degradation was higher than observed before, indicating a shift in the bacterial population. During the whole experiment, nitrate was uniformly reduced during the flow path in the reactor.     

Thermal degradation products of spruce needles

Spruce needles are analysed by in-source pyrolysis (Py)-field ionization (FI) mass spectrography and Curie-point Py-gas chromatography/electron ionization mass spectrometry. The identified thermal degradation products allow the interpretation of the FI mass signals. It could be shown that Py-FI mass spectra of plant materials are representative fingerprints which consist primarily of molecular ions of Py products derived from the thermal degradation of the main constituents of spruce needles such as carbohydrates, lignin, lipids and proteins. Primary building blocks of these biopolymers form characteristic Py products of spruce needles. Furthermore, over 500 different molecular ion species of volatilized, thermostable plant constituents are recorded using FI as soft ionization method. The present study shows that Py-FIMS is suitable for the rapid and comprehensive characterization of complex biological materials, without pretreatment of the sample except of drying and milling. The presented results contribute to the basic knowledge for the evaluation of the causes of the present tree damage.     

Life cycle engineering im Automobilbau

Ecobalance represents the basic principle for an environmental analysis and the starting point for the possibility of achieving improvements. Using the criteria related to both technology and ecology, this method has been expanded upon by IKP/PE and, over the course of many years, has proven to be a satisfactory method for those fields associated with industry and research. Data banks and software systems have been designed and are today applied in industry. An expansion of the holistic balancing to include the ‘social’ dimension is currently being developed by the IKP. Today, ecological decisions in technically and economically-associated areas are continuously being developed which place more emphasis on the preliminary developments than on a purely retrospective analysis. Aside from the continuous, further developments of these types of analysis with regard to never technical questions as well as the integration of newer aspects of optimization based on life cycle information (e.g. production balancing), the goal of further work includes the preparation of process-chain information in the respective in preliminary developments related to the design. The automobile industry consequently plays a significant role here, as was also the case in the initial transformation of methodology which was carried out in the 1990s. Finally, these developments are additionally motivated through the new ordinances presented to be employed throughout the entire EU. The responsibility attributed to a product over the course of its entire lifetime therefore plays a more prominent role. This is also reflected in ordinances like those related to the redemption of old automobiles or in the WEEE of the electronics industry (Directive on Waste Electrical and Electronic Equipment).     

Bendiocarbamate induced structural alterations in rabbit thymus after experimental peroral administration

In this study histological structure of rabbit thymus after bendiocarbamate (2,3–isopropyledene–dioxyphenyl methylcarbamate) administration was studied. Bendiocarbamate was perorally administered for 90 days. At Day 3, 10, 20, 30, 60, 90 morphometric analysis was realized. Quantitative evaluation showed that in the control group thymus cortex forms 57.94 ± 7.10% and medulla 35.94± 7.38%. In almost all experimental groups significantly higher relative volume of cortex and lower relative volume of medulla was detected. Detail morphometric analysis found that the number of thymocytes per constant area and the diameter of tymocytes was decresed after bendiocarbamate administration. The number and diameter of reticular cells was not affected. Results of this study suggest negative effect of bendiocarbamate on the formation of thymus structures.     

Recycling-oriented characterization of polyolefin packaging waste

Packaging waste is one of the main sources of secondary polyolefins. It is essential to characterize polyolefins derived from this waste stream in such way, that not only mechanical sorting methods can effectively separate, but also that on-line sensor systems can quantitatively assess their distribution. The characterization methodology is hierarchical, relating all properties of waste particles in any phase of the processing ultimately to the input End-Of-Life products. The present paper documents a pre-concentrate obtained by hand picking of mixed Romanian household waste. Investigations have been addressed to identify the composition of this polyolefin waste stream, to study the polyolefin density distribution, to distinguish the polymer manufacturing methods (i.e. injection molding and blow molding) by flake physical properties and finally to perform all the required characterization and identification by hyperspectral imaging. On the basis of these analyses, polyolefins from packaging wastes can be recycled by density separation and their rheological properties and wall thickness indicate the molding procedures. Hyperspectral imaging based procedures have been also applied to set up quality control actions for recycled products.