Monitoring environmental pollution in Erzurum by chemical analysis of Scots pine (Pinus sylvestris L.) needles

Pollution distribution maps of copper (Cu), zinc (Zn) and lead (Pb) for Erzurum province were developed on the basis of chemical analysis of Scots pine (Pinus sylvestris L.) needles collected from randomly selected sampling points during 2 years. The maps show deposition zones for the studied elements and could help in identification of sources and directions of air pollution dispersion. This study indicated that vegetation in Erzurum was greatly endangered by sulphur dioxide (SO(2)), whereas Zn does not pose an immediate threat to vegetation in most of the country's territory. However, in the city center, main and secondary road agglomeration, very high pollution with Pb and Cu could limit growth. Higher levels of SO(2) measured in some areas of Erzurum might be harmful for human and animal health. Results of this study indicated that Scots pine needles were not contaminated by Zn.     

Study on the toxicity of binary equitoxic mixtures of metals using the luminescent bacteria Vibrio fischeri as a biological target

Results from two mathematical approaches to predict the toxicity of all the possible binary equitoxic mixtures of Co, Cd, Cu, Zn and Pb were compared to the observed toxicity of these mixtures to Vibrio fischeri bacteria. Combined effect of the metals was found to be antagonistic for Co-Cd, Cd-Zn, Cd-Pb and Cu-Pb, synergistic for Co-Cu and Zn-Pb and merely additive in other cases, revealing a complex pattern of possible interactions. Besides, Cd appears much less toxic to the bacterial model than to animal cells. The synergistic effect of the Co-Cu combination and the strong lowering of Pb toxicity in the presence of Cd deserve much attention when establishing environmental safety regulations.     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.     

The modeling and analysis of transesterification reaction conditions in the selection of optimal biodiesel yield and viscosity

Among alternative fuels, biodiesel has been emphasized as a substantial candidate for diesel engines because of many advantages. However, the main shortcomings preventing more widespread use of biodiesel are high production cost and viscosity. In order to simultaneously overcome both of these shortcomings, the reaction conditions for the transesterification of waste cooking oil (WCO) were optimized using Taguchi and the full factorial design approaches. The analyses of signal to noise ratio and variance were also performed to identify the dominance of reaction conditions on viscosity and biodiesel yield. As a result, the optimal reaction conditions giving the lowest kinematic viscosity (3.991 cSt) and the highest biodiesel yield (98.19%) were determined to be as follows: sodium methoxide amount of 1.00 wt%, reaction time of 60 min, reaction temperature of 55 °C, and methanol to oil molar ratio of 6:1. The catalyst amount and methanol to oil molar ratio were found to be the most significant conditions influencing on the viscosity (10.36% and 78.87% contributions) and the yield (58.48% and 20.17% contributions), respectively. Finally, all physicochemical properties of final waste cooking oil biodiesel (WCOB) produced under optimal reaction conditions were found to meet the EN 14214.     

Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

Impacts of repeated timber skidding on the chemical properties of topsoil, herbaceous cover and forest floor in an eastern beech (Fagus orientalis Lipsky) stand

In this study, long-term timber skidding effects on herbaceous understory forest floor and soil were investigated on a skid road in a stand of the eastern beech (Fagus orientalis Lipsky). For this purpose, herbaceous understory forest floor and soil samples were collected from the skid road and from an undisturbed area used as a control plot. The mass (kg ha(-1)) of herbaceous and forest floor samples was determined, and soil characteristics were examined at two depths (0-5 cm and 5-10 cm). We quantified sand, silt and clay content, as well as bulk density compaction, pH, and organic carbon content in soil samples. The quantities of N, K, P, Na, Ca, Mg, Fe, Mn, Zn and Cu were determined in all herbaceous cover forest floor and soil samples. The quantities of Na, Fe, Zn, Cu and Mn in herbaceous understory samples from the skid road were considerably higher than those in the undisturbed area, while the quantity of Mg was considerably lower. These differences could have been caused by decreased herbaceous cover in addition to variations in the properties of the forest floor and soil after skidding. A lower amount of forest floor on the skid road was the result of skidding and harvesting activities. Mg and Zn contents in forest floor samples were found to be considerably lower for the skid road than for the undisturbed area. No significant differences were found in soil chemical properties (quantities of N, P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn) at the 0-5 cm soil depth. Important differences exist between soil quantities of Mg at a 5-10 cm depth on the skid road and in undisturbed areas. Both 0-5 cm and 5-10 cm soil depths, the average penetrometer resistance values for the skid road was higher than for the undisturbed area. This result shows that the compaction caused by skidding is maintained to depth of 10 cm. Skid road soil showed higher bulk density values than undisturbed areas because of compaction.     

Bioavailability and toxicological potential of lentil-bound residues of malathion in rats.

Lentil grains treated with malathion and stored under laboratory conditions for 12 months formed bound residues. Bioavailability and the effects of lentil-bound residues of malathion in rats were studied. The amount of bound residues in lentils treated with 14C-malathion at 10 ppm and 50 ppm gradually increased to 9.52% and 13.01% of the initially applied doses after 12 months. When rats were fed these 14C-bound residues, radioactivity excreted in urine accounted for 34.49% of the administered dose. In feces, 26.15% of given dose was methanol-extractable while 18.67% was determined as nonextractable. Various tissues including liver, kidney, fat and lungs contained 8.93% while radioactivity in expired air (14CO2) was low (1.51%). The results indicate that lentil-bound malathion residues are highly bioavailable to rats. Analysis of the lentil material containing bound residues indicated that the main compound was malathion. Lentil-bound malathion residues were administered to albino rats at 0.95 and 6.51 ppm in the feed for 3 months. Body weights were determined during and at the end of the experiment. Terminal organ weights were also determined and a number of blood chemistry parameters were examined. A significant reduction in serum cholinesterase activity and an increase in blood urea nitrogen and in white cell count suggest a toxocological potential of the bound residues.     

Effect of arsenic compounds on Vibrio fischeri light emission and butyrylcholinesterase activity

The effect of organic arsenic compounds and inorganic As(V) and As(III) on Vibrio fischeri luminescence and butyrylcholinesterase activity were evaluated using Microtox and microcalorimetric analysis. Organic arsenic compounds were arsenocholine (AsC), arsenobetaine (AsB), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and the antibiotic 4-hydroxy-3-nitrobenzene arsonic acid (HNAA, Roxarsone^(R)). HNAA, As(III) and As(V) were found to inhibit Vibrio fischeri light emission whereas MMA, DMA, AsC and AsB produced only a slight effect. By contrast, only AsC, AsB and As(III) were found to inhibit butyrylcholinesterase activity. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic (www.research.plymouth.ac.uk/ace).