Remediation of contaminated agricultural soils near a former Pb/Zn smelter in Austria: batch, pot and field experiments

Metal contaminated crops from contaminated soils are possible hazards for the food chain. The aim of this study was to find practical and cost-effective measures to reduce metal uptake in crops grown on metal contaminated soils near a former metal smelter in Austria. Metal-inefficient cultivars of crop plants commonly grown in the area were investigated in combination with in-situ soil amendments. A laboratory batch experiment using 15 potential amendments was used to select 5 amendments to treat contaminated soil in a pot study using two Barley (Hordeum vulgare L.) cultivars that differed in their ability to accumulate cadmium. Results from this experiment identified 3 of these amendments for use in a field trial. In the pot experiment a reduction in ammonium nitrate extractable Cd (<41%) and Pb (<49%) compared to the controls was measured, with a concurrent reduction of uptake into barley grain (Cd<62%, Pb<68%). In the field extractable fractions of Cd, Pb, and Zn were reduced by up to 96%, 99%, and 99%, respectively in amended soils.     

The occurrence of xenoestrogens in the Elbe river and the North Sea

The xenoestrogens Bisphenol A (BPA), p-alkylphenols and p-alkylphenol ethoxylates were determined in water samples of the North Sea, the Elbe river, and its tributaries Schwarze Elster, Mulde, Saale and the Weisse Elster. The sampling sites of the Elbe river reached from Schmilka at the German-Czech border to Cuxhaven at the estuary. Samples of the North Sea were taken in the German Bight. Additionally, freshly deposed sediments of the River Elbe and its tributaries were analyzed. Partitioning coefficients of these compounds for the distribution between suspended particulate matter (SPM) and the aqueous phase were calculated for samples of the River Elbe at sampling site Geesthacht. The analytical procedure consisted of liquid-liquid extractions of the acidified water samples using dichloromethane. Sediments and SPM samples were extracted by Accelerated Solvent Extraction with n-hexane/acetone. Following a clean-up by HPLC, the analytes were derivatized with heptafluorobutyric acid anhydride and quantified using GC-MSD. The concentration ranges of the compounds analyzed in water samples of the Elbe river were as follows (in ng l(-1)): BPA 9-776, alkylphenols 10-221 and alkylphenol ethoxylates 18-302. In sediment samples the concentrations were (in microg kg(-1) dry mass): BPA 66-343, alkylphenols 17-1378 and alkylphenol ethoxylates 30-1797. In samples of the North Sea the concentrations were generally about 1 order of magnitude lower. As shown by the concentration profiles following the River Elbe into the North Sea, the Elbe river must be considered as a major pollution source for the North Sea concerning the compounds analyzed. The SPM/water-partitioning coefficients calculated (mean values) amounted to: BPA 4.50, alkylphenols 5.52-5.58 and alkylphenol ethoxylates 5.60-6.38. A comparison of the results with data from other surface waters showed that concentrations of these xenoestrogens in the River Elbe and its tributaries were relatively low. The evaluation of the data based on the lowest observable effect concentration (LOEC) for alkylphenols (endpoint: vitellogenin synthesis in male trout) indicated that the concentrations were well below the effectivity threshold.     

Multivariate statistical study of heavy metal enrichment in sediments of the Pearl River Estuary

The concentrations and chemical partitioning of heavy metals in the sediment cores of the Pearl River Estuary were studied. Based on Pearson correlation coefficients and principal component analysis results, Al was selected as the concentration normalizer for Pb, while Fe was used as the normalizing element for Co, Cu, Ni and Zn. In each profile, sections with metal concentrations exceeding the upper 95% prediction interval of the linear regression model were regarded as metal enrichment layers. The heavy metal accumulation mainly occurred at sites in the western shallow water areas and east channel, which reflected the hydraulic conditions and influence from riparian anthropogenic activities. Heavy metals in the enrichment sections were evaluated by a sequential extraction method for possible chemical forms in sediments. Since the residual, Fe/Mn oxides and organic/sulfide fractions were dominant geochemical phases in the enriched sections, the bioavailability of heavy metals in sediments was generally low. The 206Pb/207Pb ratios in the metal-enriched sediment sections also revealed the influence of anthropogenic sources. The spatial distribution of cumulative heavy metals in the sediments suggested that the Zn and Cu mainly originated from point sources, while the Pb probably came from non-point sources in the estuary.     

Awareness of environmental legislation as a deterrent for wildlife crime: A case with Masaai pastoralists,poison use and the Kenya Wildlife Act

Illegal wildlife crime is a global phenomenon, accelerating the ongoing biodiversity crisis. In the Old World, and particularly in Africa, illegal use of poisons to eliminate carnivores is the main driver of the continental vulture crisis. Knowledge about the underlying source and drivers of this threat is lacking for most areas, including Kenya, a global vulture and biodiversity hotspot. An extensive questionnaire survey of over 1300 respondents was run, using a specialized questioning technique and quantitative analytical approaches. Results show that, while pastoralists have a positive attitude towards vultures, over 20% of them use poisons to eliminate predators. Poisoning was largely driven by livestock losses to predators, and by negative attitude towards predators. Poisoning was less prevalent among respondents aware of the Kenya Wildlife Act. Overall, we suggest that a combination of top-down, e.g. legislation, and bottom-up (such as corrals or compensation) along with awareness campaigns may help reduce poisoning on the ground.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01695-8.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.     

Hierarchical priority setting for restoration in a watershed in NE Spain, based on assessments of soil erosion and ecosystem services

Maintaining and enhancing ecosystem services through the restoration of degraded ecosystems have become an important biodiversity conservation strategy. Deciding where to restore ecosystems for the attainment of multiple services is a key issue for future planning, management, and human well-being. Most restoration projects usually entail a small number of actions in a local area and do not consider the potential benefits of planning restoration at broad regional scales. We developed a hierarchical priority setting approach to evaluate the performance of restoration measures in a semiarid basin in NE Spain (the Martín River Basin, 2,112 km²). Our analysis utilized a combination of erosion (a key driver of degradation in this Mediterranean region) and six spatially explicit ecosystem services data layers (five of these maps plotted surrogates for soil retention and accumulation, water supply and regulation, and carbon storage, and one plotted a cultural service, ecotourism). Hierarchical maps were generated using a geographic information system that combined areas important for providing a bundle of ecosystem services, as state variables, with erosion maps, as the disturbance or regulatory variable. This was performed for multiple scales, thereby identifying the most adequate scale of analysis and establishing a spatial hierarchy of restoration actions based on the combination of the evaluation of erosion rates and the provision of ecosystem services. Our approach provides managers with a straightforward method for determining the spatial distribution of values for a set of ecosystem services in relation to ecological degradation thresholds and for allocating efforts and resources for restoration projects in complex landscapes.     

Carbon Emission from the Surface of Coarse Woody Debris in Korean Pine Forests of Southern Primorye

Carbon dioxide fluxes from the surface of coarse woody debris (CWD) have been measured in Korean pine forests of the southern Sikhote-Alin mountain range. The seasonal dynamics of oxidative conversion of CWD carbon have been evaluated, and average values of the CO₂ emission rate have been determined for CWD fragments of three tree species at different stages of decomposition. The degree of decomposition is an important factor of spatial variation in CO₂ emission rate, and temporal variation in this parameter is adequately described by an exponential function of both CWD temperature and air temperature (R² = 0.65–0.75).     

Garbage in garbage out: the contribution of our industrial advancement to wastewater degeneration

Environmental Science and Pollution Research - Natural water sources are habitually marred by insidious anthropogenic practices and municipal wastewater discharges that contain either of xenobiotic...     

Compassionate versus consequentialist conservation

Ethical treatment of wildlife and consideration of animal welfare have become important themes in conservation, but ethical perspectives on how best to protect wild animals and promote their welfare are diverse. There are advantages to the consequentialist harms ethical framework applied in managing wild herbivores for conservation purposes. To minimize harms while achieving conservation goals, we argue that overabundant wild herbivores should in many cases be managed through consumptive in situ killing. Advantages of this policy are that the negative welfare states imposed on animals last only a short time; remaining animals are not deprived of positive welfare states (e.g., linked to rearing offspring); poor welfare states of animals in overabundant populations are avoided (e.g., starvation); negative welfare impacts on heterospecifics through resource depletion (i.e., competition) are prevented; harvesting meat reduces the number of (agricultural) animals raised to supply meat; and minimal costs maximize funding for other wildlife management and conservation priorities. Alternative ethical approaches to our consequentialist framework include deontology (containing animal rights) and virtue ethics, some of which underpin compassionate conservation. These alternative ethical approaches emphasize the importance of avoiding intentional killing of animals but, if no population reduction occurs, are likely to impose considerable unintentional harms on overabundant wildlife and indirectly harm heterospecifics through ineffective population reduction. If nonlethal control is used, it is likely that overabundant animals would be deprived of positive welfare states and economic costs would be prohibitive. We encourage conservation stakeholders to consider animal-welfare consequentialism as an ethical approach to minimize harms to the animals under their care as well as other animals that policies may affect while at the same time pursuing conservation goals.     

Performance of a large-scale greenhouse solar dryer integrated with phase change material thermal storage system for drying of chili

ABSTRACT

Large-scale greenhouse solar dryers have been used for drying various products and this type of dryer is usually equipped with LPG burner as auxiliary heater, which creates more operating cost. To overcome this problem, phase change material (PCM) thermal storage was proposed to substitute for the LPG burner. In this work, the performance of a large-scale greenhouse solar dryer integrated with a PCM as a latent heat storage for drying of chili was investigated. Experimental studies were conducted to compare the performance of this dryer with that of another large-scale greenhouse solar dryer without the PCM thermal storage and open sun drying. Chili with an initial moisture content of 74.7% (w.b.) was dried to a final moisture content of 10.0% (w.b.) in 2.5 days, 3.5 days, and 11 days using the solar dryer integrated with the PCM thermal storage, the solar dryer without the PCM thermal storage and the open sun drying, respectively. The performance of the solar dryer integrated with the PCM thermal storage was also evaluated using exergy analysis. The exergy efficiency of the drying room of the solar dryer integrated with the PCM thermal storage and the solar dryer without the PCM thermal storage for drying of chili was found to be 13.1% and 11.4%, respectively and the thermal storage helps to dry chili during adverse weather conditions. The results of exergy analysis implied that the exergy losses from the dryer with the PCM should be reduced.