Chromate reduction by chromium-resistant bacteria isolated from soils contaminated with dichromate

Extensive use of hexavalent chromium [Cr(VI)] in various industrial applications has caused substantial environmental contamination. Chromium-resistant bacteria isolated from soils can be used to remove toxic Cr(VI) from contaminated environments. This study was conducted to isolate chromium-resistant bacteria from soils contaminated with dichromate and describes the effects of some environmental factors such as pH, temperature, and time on Cr(VI) reduction and resistance. We found that chromium-resistant bacteria can tolerate 2500 mg L(-1) Cr(VI), but most of the isolates tolerated and reduced Cr(VI) at concentrations lower than 1500 mg L(-1). Chromate reduction activity of whole cells was detected in five isolates. Most of these isolates belong to the genus Bacillus as identified by the 16S rRNA gene sequencing. Maximal Cr(VI) reduction was observed at the optimum pH (7.0-9.0) and temperature (30 degrees C) of growth. One bacterial isolate (Bacillus sp. ES 29) was able to aerobically reduce 90% of Cr(VI) in six hours. The Cr(VI) reduction activity of the whole cells of five isolates had a K(M) of 0.271 (2.61 mM) to 1.51 mg L(-1) (14.50 mM) and a V(max) of 88.4 (14.17 nmol min(-1)) to 489 mg L9-1) h(-1) (78.36 nmol min(-1)). Our consortia and monocultures of these isolates can be useful for Cr(VI) detoxification at low and high concentrations in Cr(VI)-contaminated environments and under a wide range of environmental conditions.     

Evaluating factors influencing groundwater vulnerability to nitrate pollution: developing the potential of GIS

The 1991 EU Nitrate Directive was designed to reduce water pollution from agriculturally derived nitrates. England and Wales implemented this Directive by controlling agricultural activities within their most vulnerable areas termed Nitrate Vulnerable Zones. These were designated by identifying drinking water catchments (surface and groundwater), at risk from nitrate pollution. However, this method contravened the Nitrate Directive because it only protected drinking water and not all waters. In this paper, a GIS was used to identify all areas of groundwater vulnerable to nitrate pollution. This was achieved by constructing a model containing data on four characteristics: the quality of the water leaving the root zone of a piece of land; soil information; presence of low permeability superficial (drift) material; and aquifer properties. These were combined in a GIS and the various combinations converted into a measure of vulnerability using expert knowledge. Several model variants were produced using different estimates of the quality of the water leaving the root zone and contrasting methods of weighting the input data. When the final models were assessed all produced similar spatial patterns and, when verified by comparison with trend data derived from monitored nitrate concentrations, all the models were statistically significant predictors of groundwater nitrate concentrations. The best predictive model contained a model of nitrate leaching but no land use information, implying that changes in land use will not affect designations based upon this model. The relationship between nitrate levels and borehole intake depths was investigated since there was concern that the observed contrasts in nitrate levels between vulnerability categories might be reflecting differences in borehole intake depths and not actual vulnerability. However, this was not found to be statistically important. Our preferred model provides the basis for developing a new set of groundwater Nitrate Vulnerable Zones that should help England and Wales to comply with the EU Nitrate Directive.     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

Cadmium accumulation and metallothionein synthesis in freshwater bivalves (Pyganodon grandis): relative influence of the metal exposure gradient versus limnological variability

The relative influence of limnological confounding factors on cadmium (Cd) bioaccumulation and metallothionein (MT) synthesis was quantified in natural populations of freshwater bivalves (Pyganodon grandis) living in lakes along a Cd concentration gradient. During the ice-free period, we measured 15 environmental variables in the water compartment and determined total concentrations of Cd and MT in the gills of bivalves at 37 littoral stations in 20 lakes distributed across the mining area of Rouyn-Noranda in northwestern Quebec. A multiple linear regression model including pH (+), dissolved Ca concentrations (-) and free Cd2+ concentrations at the sediment-water interface (+) explained 74% of the variability in Cd concentrations in the bivalve gills. Dissolved Ca (-) and free Cd2+ (+) together explained 62% of the variation in MT concentrations in the bivalve gills. Partial linear regression analyses indicated that the limnological factors' pure and shared effects together accounted for 48 and 45% of the total variation in Cd and MT concentrations in the gills, respectively. A lake selection procedure that could be applied in monitoring programs is proposed to minimise the relative influence of these confounding variables.     

Soil testing to predict phosphorus leaching

Subsurface pathways can play an important role in agricultural phosphorus (P) losses that can decrease surface water quality. This study evaluated agronomic and environmental soil tests for predicting P losses in water leaching from undisturbed soils. Intact soil columns were collected for five soil types that a wide range in soil test P. The columns were leached with deionized water, the leachate analyzed for dissolved reactive phosphorus (DRP), and the soils analyzed for water-soluble phosphorus (WSP), 0.01 M CaCl2 P (CaCl2-P), iron-strip phosphorus (FeO-P), and Mehlich-1 and Mehlich-3 extractable P, Al, and Fe. The Mehlich-3 P saturation ratio (M3-PSR) was calculated as the molar ratio of Mehlich-3 extractable P/[Al + Fe]. Leachate DRP was frequently above concentrations associated with eutrophication. For the relationship between DRP in leachate and all of the soil tests used, a change point was determined, below which leachate DRP increased slowly per unit increase in soil test P, and above which leachate DRP increased rapidly. Environmental soil tests (WSP, CaCl2-P, and FeO-P) were slightly better at predicting leachate DRP than agronomic soil tests (Mehlich-1 P, Mehlich-3 P, and the M3-PSR), although the M3-PSR was as good as the environmental soil tests if two outliers were omitted. Our results support the development of Mehlich-3 P and M3-PSR categories for profitable agriculture and environmental protection; however, to most accurately characterize the risk of P loss from soil to water by leaching, soil P testing must be fully integrated with other site properties and P management practices.     

Point- and nonpoint-source pesticide contamination in the Zwester Ohm catchment, Germany

Reducing pesticide loads in surface waters implies identifying the pathways responsible for the pollution. The current study documents the pesticide contamination of the river Zwester Ohm, a 4917-ha catchment in Germany with 41% of the land used for crop production. Discharges and concentrations of 19 pesticides were measured continuously at three locations for 15 mo. The load detected at the outlet of the catchment amounted to 9048 g a.i. The losses represent 0.22% of the pesticides applied by the farmers. The contamination showed a seasonal pattern following the pesticide application times. The wastewater treatment plant system (WWTPS) in the catchment (two wastewater treatment plants [WWTP], 14 combined sewer overflows (CSO), four CSO tanks) emits during dry weather periods purified sewage and during storm events sewage mixed with stormwater runoff into the river. The contribution by the WWTPS to the pesticide load was defined as point-source pollution (PSP). The load was dominated by PSP with at least 77% of the total pollution. No significant interdependencies between intrinsic properties of the pesticides, hydrometeorological factors, and the loads occurring in the stream could be found. Therefore, it is not possible to predict PSP for other catchments based on the results from this study. Whereas 65% of the total load entered the river via the WWTP, a portion of 12% was attributed to the CSO. The study points out that the influence of CSO on PSP should be taken into account in future catchment studies in areas with comparable agricultural structure.     

Natural uranium and thorium distributions in podzolized soils and native blueberry

Plant uptake of radionuclides is one of many vectors for introduction of contaminants into the human food chain. Thus, it is critical to understand soil-plant relationships that control nuclide bioavailability. Our objectives in this study were to (i) determine the extent of U and Th uptake and cycling by blueberry (Vaccinium pallidum Aiton) in native habitat and (ii) identify the soil properties and processes that contribute most to U and Th bioavailability in this system. We collected composite samples of plant leaves and stems, and samples from surface (AE) horizons and from the upper part of the Bs horizon at two sites. Concentration ratios (CRs) for U and Th were calculated for all plant tissues, using both the AE and Bs horizons as the base. Soil concentrations of U ranged from 16 to 25 microg g(-1), with a mean of 21.1 microg g(-1). Soil concentrations of Th ranged from 14 to 97 microg g(-1), with a mean of 41.8 microg g(-1). Mean U concentrations were 8.65 x 10(-3) microg g(-1) in leaf tissue, and 7.95 x 10(-3) microg g(-1) in stem tissue. Mean Th concentrations were 1.59 x 10(-1) microg g(-1) in leaf tissue, and 9.10 x 10(-2) microg g(-1) in stem tissue. Blueberry plants are cycling both U and Th in this system, with Th cycling occurring to a greater extent than U. In addition, Th was translocated preferentially to plant leaves while U concentrations showed little preferential translocation. Uranium uptake, however, seemed more sensitive than Th uptake to soil properties.     

Radioactivity and heavy metal composition of Nigerian phosphate rocks: possible environmental implications

Phosphate rock samples collected from the Dange Formation within the Sokoto basin were analyzed for trace element constituents using instrumental neutron activation analysis (INAA) and X-ray fluorescence analysis (XRFA) techniques, while natural activity concentrations due to 235U, 232Th, and 40K were determined by gamma-ray spectrometry. The analytical results show that the average concentrations of some toxic elements (As, Sb, Cr, and Zn) in phosphate rocks are not appreciably different from that in agricultural soils. However the U and Th contents are enriched significantly in comparison. The results were used to assess the environmental toxicity of heavy metals and radiation hazard attributable to the direct application of phosphate rock as fertilizer.     

Critical remarks on the use of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) for monitoring of airborne pollution

Duplicate samples of the two terrestrial moss species Hylocomium splendens and Pleurozium schreberi, which are widely used to monitor airborne heavy metal pollution, have been collected from eight catchments spread over a 1,500,000 km2 area in northern Europe. These were analysed for a total of 38 elements by inductively coupled plasma-mass spectrometry, inductively coupled plasma-atomic emission spectrometry and cold vapour-atomic absorption spectometry techniques. Results show that the moss species can be combined without interspecies calibration for regional mapping purposes. For the majority of elements the observed within-catchment variation is large--big composite samples over a large area should thus be collected when moss is to be used for monitoring purposes. For the majority of elements the input of dust governs moss chemistry. For a reliable 'contamination' signal over a sizeable area a major source is needed. Some elements show a dependence on climate/vegetation zone. In coastal areas the input of marine aerosols will alter the chemical signal obtained from moss samples.