多环芳烃的零阶价分子连接性指数与正-辛醇/水分配系数

本文建立了准确预测多环芳烃(PAHs)及其烷基衍生物的正-辛醇/水分配系数(Kow)模型。模型表明PAHs的分配性质可用零阶价分子连接性指数(~°x~v)描述,~°x~v数值与PAHs的logKow成正比。应用本模型可以预测大范围PAHs的logKow值。     

Climate change: potential impact on plant diseases

Global climate has changed since pre-industrial times. Atmospheric CO(2), a major greenhouse gas, has increased by nearly 30% and temperature has risen by 0.3 to 0.6 degrees C. The intergovernmental panel on climate change predicts that with the current emission scenario, global mean temperature would rise between 0.9 and 3.5 degrees C by the year 2100. There are, however, many uncertainties that influence these predictions. Despite the significance of weather on plant diseases, comprehensive analysis of how climate change will influence plant diseases that impact primary production in agricultural systems is presently unavailable. Evaluation of the limited literature in this area suggests that the most likely impact of climate change will be felt in three areas: in losses from plant diseases, in the efficacy of disease management strategies and in the geographical distribution of plant diseases. Climate change could have positive, negative or no impact on individual plant diseases. More research is needed to obtain base-line information on different disease systems. Most plant disease models use different climatic variables and operate at a different spatial and temporal scale than do the global climate models. Improvements in methodology are necessary to realistically assess disease impacts at a global scale.     

Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Effect of experimental factors on nitrobenzaldehyde photoisomerization

The objective of this study was to compare the effect of various experimental factors on the photoisomerization of nitrobenzaldehyde. The experimental factors included light source, light energy, exposure time, light path distance and the concentration of nitrobenzaldehyde. The results showed that the photoisomerization of nitrobenzaldehyde increased with increasing light exposure. Different light sources and light path distances demonstrated significant impact on the reaction rate constants and half-lives of nitrobenzaldehyde. Although the light energy of UV photoreactor was 47% lower than that of xenon photoreactor, quantum yield and UV/VIS absorption pattern confirmed the finding that the effect of ultraviolet photoreactor on nitrobenzaldehyde was similar to that of xenon photoreactor with the light path of 17 cm. It was caused by the shorter wavelength of UV photoreactor mainly on 254 nn. The product of nitrobenzaldehyde photoisomerization, nitrosobenzoic acid, was detected from samples after 5 or 10 min exposure of three light sources. The concentrations of nitrosobenzoic acid increased with the increasing of exposure time up to 20 or 60 min.     

表面活性剂复配修饰添加不同含量蒙脱石的黄棕壤对苯酚的吸附作用

在两性修饰剂十二烷基二甲基甜菜碱(BS-12)和阳离子型表面修饰剂十六烷基三甲基溴化铵(CTMAB)复配修饰膨润土吸附苯酚最佳修饰比例的基础上,通过添加膨润土改变2种黄棕壤中的蒙脱石含量(分别为6%和43%),利用X射线衍射和有机碳含量表征了蒙脱石含量对BS+CTMAB复配修饰黄棕壤性质的影响.同时,采用批处理法研究了蒙脱石含量对BS-12+CTMAB复配修饰黄棕壤吸附苯酚能力的影响,对比了不同温度、p H和离子强度下吸附的差异,并探讨了影响机制.结果表明,CTMAB复配修饰增加了BS-12修饰土样的TOC含量并增强了土样对苯酚的吸附能力,且苯酚在复配修饰土中的解吸程度均高于CK、BS-12和CTMAB修饰土;随着黄棕壤中蒙脱石含量的增大,BS-12、CTMAB修饰和BS-12+CTMAB复配修饰土蒙脱石层间距、TOC含量和对苯酚吸附能力整体上均呈增加趋势;单因素对各修饰土样吸附苯酚的影响程度上,温度、p H逐渐减小,离子强度逐渐增大;蒙脱石含量决定的TOC是影响修饰土样对苯酚吸附能力大小的关键因素,修饰土样对苯酚的吸附依然以分配作用为主.     

广州市水资源人口承载力研究

水资源是城市可持续发展的重要基础,科学分析城市水资源承载力与经济社会发展的关系,并基于此协调人口与水资源的关系,建立适应于城市水资源承载力的人类生活与生产方式,将有助于实现城市经济社会可持续发展。本文的计算思路是在对广州市水资源现状进行分析的基础之上,构建广州市水资源承载力评价指标体系,划定水资源承载力等级,对市各辖区相应的水资源承载力进行评价,同时结合广州市人口规划预测的人口数量及未来的供水能力等进行预测,以此提出提升水资源承载力的相关政策和措施。     

黑龙江省饮用水水源地基础环境现状

饮用水的安全与否已经成为威胁人们健康的重要因素,保护饮用水水源地、保障人民饮水安全已经成为事关国家安全、社会稳定的重要工作。本文介绍了黑龙江饮用水水源地的基本情况、特点以及存在的问题,并提出了相应的对策和建议,希望可以为改善全省饮用水水源地水质,保障人民饮水安全提供一些帮助。     

成都平原毗河下游生态环境需水量研究

20世纪90年代以来,河流生态环境需水成为生态水文学研究的重要内容。阐述了基于国际上新兴发展的生态水文学理论的生态环境需水量的概念和内涵。并以毗河为例,用能反映时间尺度的河流流量来表达生态环境需水量,而不是传统意义上的水量。为了与水资源配置的时间单元协调起来,对3个代表年〖WTBX〗P〖WTBZ〗=50%（1968年）,〖WTBX〗P〖WTBZ〗=75%（1986年）,〖WTBX〗P〖WTBZ〗=90%（1987年）分别进行生态环境需水量的计算。根据毗河的自然条件,利用Montana法计算了河道维护水生生境最小需水量和最适宜需水量;蒸发需水量由水面宽度、河道两断面间平均长度、河道蒸发深度三者确定;结合河道功能区划和水质目标,计算了污染物稀释需水量。最终确定毗河下游河道的最小生态环境需水量为20.64 m3/s,最适宜生态环境需水量为25.84 m3/s。     

底栖穴居动物对潮滩N迁移转化的影响

以软体动物河蚬(Corbiculafluminea)为例,运用实验模拟的方法,通过对上覆水、孔隙水和沉积物的对比分析,研究了底栖动物对潮滩N迁移转化的影响。实验结果发现,河蚬主要通过排泄和生物扰动影响N在沉积物-水界面间的迁移转化。在富氧的环境下,底栖动物的活动结果使NO3 N在上覆水中有明显的持续累积效应,NH4 N在较深层孔隙水中积累,而NO2 N易在沉积物中累积。     

药型罩参数对聚能射流水下运动的影响

目的 研究药型罩结构参数对所形成的聚能射流在水中运动的影响,改进水中聚能射流的运动特性。方法 采用多物质单元ALE法就锥形罩射流对水介质的侵彻进行数值模拟,分析锥形装药结构中药型罩锥角和厚度对所形成的聚能射流侵彻水时运动参数的影响。结果 锥形罩锥角大小及药型罩厚度对聚能射流在水中的形状、射流速度、加速度等有着明显的影响。侵彻体进入水中10 cm后,药型罩的锥角从30°增加到150°的过程中,剩余速度先增大、后减小,在90°时达到最高。药型罩厚度为1.5～4mm时,剩余速度变化起伏小;厚度为4～6 mm时,剩余速度开始大幅下降。结论 当锥角为90°时,罩厚为4 mm的药型罩所形成的射流在水中表现最好,形成的射流侵彻深度最长,侵彻水介质10 cm后的剩余速度最大,存速能力最强。