Laboratory Characterization of Modified Tapered Element Oscillating Microbalance Samplers

Abstract

Laboratory tests with generated aerosols were conducted to test the efficacy of two recent design modifications to the well-established tapered element oscillating microbalance (TEOM) continuous particulate matter (PM) mass monitor. The two systems tested were the sample equilibration system-equipped TEOM monitor operating at 30 °C, which uses a Nafion dryer as part of the sample inlet, and the differential TEOM monitor, which adds a switched electrostatic precipitator and uses a self-referencing algorithm to determine “true PM mass.” Test aerosols included ammonium sulfate, ammonium nitrate, sodium chloride, copper (II) sulfate, and mixed aerosols. Aerosols were generated with an atomizer or a vibrating orifice generator and were equilibrated in a 450-L slow flow chamber before being sampled. Relative humidity in the chamber was varied between 10 and 90%, and step changes in humidity were executed while generating aerosol to test the response of the instruments. The sample equilibration system-equipped TEOM monitor does reduce, but not totally eliminate, the sensitivity of the TEOM mass monitor to changes in humidity. The differential TEOM monitor gives every indication of being a very robust technique for the continuous real-time measurement of ambient aerosol mass, even in the presence of semi-volatile particles and condensable gases.     

Short and medium chain length chlorinated paraffins in UK human milk fat

Chlorinated paraffins (also called polychlorinated n-alkanes -- PCAs) are a class of industrial chemicals comprising chlorinated straight chain hydrocarbons. They have a wide range of applications and are now found in a range of environmental compartments. We analysed a total of 25 human milk-fat samples, donated by 18 individuals from the urban London and more rural Lancaster areas in the UK, for short chain PCAs (C(10)-C(13) sPCAs) and medium chain PCAs (C(14)-C(17) mPCAs), using gas chromatography-ECNI high-resolution mass spectrometry. Our study confirms that trace quantities of PCAs can reach human milk-fat. sPCAs were detected in all but four samples, while mPCAs were detected in all samples. The median sPCA concentration was 180 ng/g fat (range of 49 to 820 ng/g fat -- detected values only) and the median mPCA concentration was 21 ng/g fat (range of 6.2 to 320 ng/g fat). No differences were noted in ranges of observed values for either sPCAs or mPCAs between samples from London and Lancaster. Most samples also exhibited similar patterns of sPCAs and mPCAs. One sample exhibited a different pattern for sPCAs and mPCAs, an observation that may be related to differences in exposure or biological factors for this individual.     

Treatment of cork boiling wastewater using chemical oxidation and biodegradation

Three cultures were enriched from cork boiling wastewater using tannic acid as the selective carbon substrate, at 25 degrees C and pH 7.2, 25 degrees C and pH 4.7 and 50 degrees C and pH 4.7. The enrichment culture obtained at neutral pH was composed of five culturable isolates, whereas from each acidic enrichment two bacterial strains were isolated. Mesophilic isolates were Gram negative bacteria belonging to the genera Klebsiella, Pseudomonas, Stenotrophomonas and Burkholderia. Thermophilic isolates were members of the genus Bacillus. Despite the capability of the enrichment cultures to use tannic acid as single carbon and energy source, those cultures were unable to reduce the total polyphenols or the total organic carbon content of cork boiling wastewater. In order to increase the bioavailability of the organic carbon in cork boiling wastewater, biodegradation was preceded by Fenton oxidation. It was demonstrated that the combined process, using small amounts of Fenton reagents and biodegradative inoculum added almost simultaneously to cork boiling wastewater, leads to TOC reductions of more than 90%.     

Investigation of the usage of centrifuging waste of mineral wool melt (CMWW), contaminated with phenol and formaldehyde,in manufacturing of ceramic products

Large amounts of centrifuging waste of mineral wool melt (CMWW) are created during the production of mineral wool. CMWW is technogenic aluminum silicate raw material, formed from the particles of undefibred melt (60–70%) and mineral wool fibers (30–40%). 0.3–0.6% of organic binder with phenol and formaldehyde in its composition exists in this material. Objective of the research is to investigate the possibility to use CMWW as an additive for the production of ceramic products, by neutralising phenol and formaldehyde existing in CMWW. Formation masses were prepared by incorporating 10%, 20% and 30% of CMWW additive and burned at various temperatures. It was identified that the amount of 10–30% of CMWW additive influences the following physical and mechanical properties of the ceramic body: lowers drying and firing shrinkage, density, increases compressive strength and water absorption. Investigations carried out show that CMWW waste can be used for the production of ceramic products of various purposes.     

The Climate Value of Cycling

The reduction of CO₂ emissions constitutes one of the largest challenges of the current era. Sustainable transportation, and especially cycling, can contribute to the mitigation of CO₂ emissions since cycling possesses an intrinsic zero‐emission value. Few studies have been conducted that appraise the CO₂ reduction potential of cycling. Opportunity costs enable the estimation of avoided CO₂ emissions resulting from bicycle trips. The methodology developed in this research allows the attribution of a climate value to cycling by substituting bicycle trips with their most likely alternative transportation modes and calculating the resulting additional CO₂ emissions. The methodology uses data on the current modal shares of cycling mobility, the competition of cycling with other transportation modes, and CO₂ emission factors to calculate the climate value of cycling. When it is assumed that the avoided CO₂ emissions of cycling mobility could be traded on financial carbon markets, the climate value of cycling represents a monetary value. Application of the methodology to the case of Bogotá, Colombia — a city with a current bicycle modal share of 3.3% on a total of 10 million daily trips — results in a climate value of cycling of 55,115 tons of CO₂ per year, corresponding to an economic value of between 1 and 7 million US dollars when traded on the carbon market.     

Approximate bilateral symmetry in evaporation-induced polycrystalline structures from droplets of wheat grain leakages and fluctuating asymmetry as quality indicator

The present paper reports on an observation that dendrite-like polycrystalline structures from evaporating droplets of wheat grain leakages exhibit bilateral symmetry. The exactness of this symmetry, measured by means of fluctuating asymmetry, varies depending on the cultivar and stress factor influence, and seems to correspond to the seed germination rate. In the bodies of plants, animals, and humans, the exactness of bilateral symmetry is known to reflect the environmental conditions of an organism’s growth, its health, and its success in sexual selection. In polycrystalline structures, formed under the same conditions, the symmetry exactness depends on the properties of the crystallizing solution such as the composition and viscosity; however, it has never been associated with sample quality. We hypothesize here that, as in living nature, the exactness of approximate bilateral symmetry might be considered a quality indicator also in crystallographic methods applied to food quality analysis.     

Impact of municipal solid waste incineration bottom ash on the properties and frost resistance of clay bricks

Journal of Material Cycles and Waste Management - This paper presents an experimental study on the properties, structure and durability (frost resistance: one-side and all-sides freezing and...     

The use of plate heat exchangers to improve energy efficiency in phosphoric acid production

This paper originated as a part of a comprehensive research project designed to develop ecologically sustainable, environmentally friendly, resource- and energy-saving industrial process technology for the production of a wide class of phosphorus containing substances. The essential feature of the research was designed for the replacement of tubular heat exchangers with Plate heat exchangers (PHEs) and for the installation of these units in new locations in the processes to optimally improve energy efficiency and to prevent pollution. Despite the severe operating conditions in the production of phosphoric acid PHEs of various designs find the application in these processes. For such a corrosive environment as a phosphoric acid production plant, the Hastelloy G30 alloy is used as the material for the plates and synthetic rubber EPDM is used as the material for inter-plate gaskets. The analysis of the data shows, that using mixed groupings of plates in the unit allows one to obtain optimal solutions. The simulation of barometric mixing condenser recycled water cooling with plate heat exchanger shows the possibility of an application which minimizes the waste water pollution by closing the condenser cooling water circuit. Software was developed for calculations of units working both with liquid and phase changing streams.     

Improving the adsorption capacity and solid structure of natural volcanic soil using a foaming-sintering process based on recycled polyethylene terephthalate (PET).

The volcanic soils of southern Chile have demonstrated a high capacity to adsorb environmental pollutants, but for an industrial application, a stable solid material is necessary. The objective of this work was to produce a stable ceramic material through a process involving volcanic soil-polyurethane foam produced with recycled polyethylene terephthalate (PET)-polyols, and further thermal treatment. The selected foam formulation with 35.4% volcanic soil (< 63 microm) seems to be the most suitable for thermal treatment, with temperature steps at 700, 850, 1000 and 1200 degrees C. The porous ceramic material obtained has a stable solid form and an improved chlorophenols adsorption capacity (comparable to natural zeolites) that makes it suitable for advanced wastewater treatment and landfill leachate depuration.