Structural elucidation of main ozonation products of the artificial sweeteners cyclamate and acesulfame

Purpose  

The two artificial sweeteners cyclamate (CYC) and acesulfame (ACE) have been detected in wastewater and drinking water treatment plants. As in both facilities ozonation might be applied, it is important to find out if undesired oxidation products (OPs) are formed.     

Approach for detecting mutagenicity of biodegraded and ozonated pharmaceuticals, metabolites and transformation products from a drinking water perspective

Many pharmaceuticals and related metabolites are not efficiently removed in sewage treatment plants and enter into surface water. There, they might be subject of drinking water abstraction and treatment by ozonation. In this study, a systematic approach for producing and effect-based testing of transformation products (TPs) during the drinking water ozonation process is proposed. For this, two pharmaceutical parent substances, three metabolites and one environmental degradation product were investigated with respect to their biodegradability and fate during drinking water ozonation. The Ames test (TA98, TA100) was used for the identification of mutagenic activity present in the solutions after testing inherent biodegradability and/or after ozonation of the samples. Suspicious results were complemented with the umu test. Due to the low substrate concentration required for ozonation, all ozonated samples were concentrated via solid phase extraction (SPE) before performing the Ames test. With the exception of piracetam, all substances were only incompletely biodegradable, suggesting the formation of stable TPs. Metformin, piracetam and guanylurea could not be removed completely by the ozonation process. We received some evidence that technical TPs are formed by ozonation of metformin and piracetam, whereas all tested metabolites were not detectable by analytical means after ozonation. In the case of guanylurea, one ozonation TP was identified by LC/MS. None of the experiments showed an increase of mutagenic effects in the Ames test. However, the SPE concentration procedure might lead to false-positive results due to the generation of mutagenic artefacts or might lead to false-negative results by missing adequate recovery efficiency. Thus, these investigations should always be accompanied by process blank controls that are carried out along the whole ozonation and SPE procedure. The study presented here is a first attempt to investigate the significance of transformation products by a systematic approach. However, the adequacy and sensitivity of the methodology need to be further investigated. The approach of combining biodegradation and ozonation with effect-based assays is a promising tool for the early detection of potential hazards from TPs as drinking water contaminants. It can support the strategy for the evaluation of substances and metabolites in drinking water. A multitude of possible factors which influence the results have to be carefully considered, among them the selectivity and sensibility of the mutagenicity test applied, the extraction method for concentrating the relevant compounds and the biocompatibility of the solvent. Therefore, the results have to be carefully interpreted, and possible false-negative and false-positive results should be considered.     

Seasonal variations of hydroxylated and methoxylated brominated diphenyl ethers in blue mussels from the Baltic Sea

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) and methoxylated polybrominated diphenyl ethers (MeO-PBDEs) found at high levels in the Baltic biota are mainly natural products, but can also be formed through metabolism or abiotic oxidation of polybrominated diphenyl ethers (PBDEs). The formation of OH-PBDEs is of concern since there is growing evidence of phenolic toxicity. This study investigates seasonal variations in levels of OH-PBDEs and MeO-PBDEs, focusing on an exposed species, the blue mussel (Mytilus edulis), sampled in the Baltic Sea in May, June, August and October of 2008. Both the OH-PBDE and MeO-PBDE levels in the mussels showed seasonal variations from May to October, the highest concentration of each congener appearing in June. The seasonal variation was more marked for OH-PBDEs than in MeO-PBDEs, but all congeners showed the same trends, except 6-MeO-BDE47 and 2′-MeO-BDE68, which did not significantly decline in concentrations after June. Biotic or abiotic debromination is suggested as a possible reason for the rapid decrease in methoxylated penta- and hexa-BDE concentrations observed in blue mussels from June to August, while the tetraBDE concentrations were stable. In addition, 1,3,7/1,3,8-tribrominated dibenzo-p-dioxins showed the same seasonal variation. The seasonal variations indicates natural formation and are unlikely to be due to transformation of anthropogenic precursors. The levels of PBDEs were fairly constant over time and considerably lower than those of the OH-PBDEs and MeO-PBDEs. The timing of the peaks in concentrations suggests that filamentous macro-algae may be important sources of these compounds found in the blue mussels from this Baltic Sea location.     

Mercury (Hg) emissions from domestic biomass combustion for space heating

Three mercury (Hg) species (gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM), and fine particulate-bound mercury (PBM_2.5)) were measured in the stack of a small scale wood combustion chamber at 400 °C, in the stack of an advanced wood boiler, and in two areas influenced by wood combustion. The low temperature process (lab-scale) emitted mostly GEM (∼99% when burning wood pellets and ∼95% when burning unprocessed wood). The high temperature wood boiler emitted a greater proportion of oxidized Hg (approximately 65%) than the low temperature system. In field measurements, mean PBM_2.5 concentrations at the rural and urban sites in winter were statistically significantly higher than in warmer seasons and were well correlated with Delta-C concentrations, a wood combustion indictor measured by an aethalometer (UV-absorbable carbon minus black carbon). Overall the results suggest that wood combustion may be an important source of oxidized mercury (mostly in the particulate phase) in northern climates in winter.     

Germanium in the soil-plant system—a review

Germanium (Ge) is widespread in the Earth’s crust. As a cognate element to silicon (Si), Ge shows very similar chemical characteristics. Recent use of Ge/Si to trace Si cycles and changes in weathering over time, growing demand for Ge as raw material, and consequently an increasing interest in Ge phytomining have contributed to a growing interest in this previously rather scarcely considered element in geochemical studies. This review deals with the distribution of Ge in primary minerals and surface soils as well as the factors influencing the mobility of Ge in soils including the sequestration of Ge in secondary mineral phases and soil organic matter. Furthermore, the uptake and accumulation of Ge in plants and effects of plant-soil relationships on the availability of Ge in soils and the biogeochemical cycling of Ge are discussed. The formation of secondary soil minerals and soil organic matter are of particular importance for the concentration of Ge in plant-available forms. The transfer from soil to plant is usually low and shows clear differences between species belonging to the functional groups of grasses and forbs. Possible uptake mechanisms in the rhizosphere are discussed. However, the processes that are involved in the formation of plant-available Ge pools in soils and consequently its biogeochemical cycling are not yet well understood. There is, therefore, a need for future studies on the uptake mechanisms and stoichiometry of Ge uptake under field conditions and plant-soil-microbe interactions in the rhizosphere as well as the chemical speciation in different plant parts.     

Estimating the spatial scale of herbicide and soil interactions by nested sampling, hierarchical analysis of variance and residual maximum likelihood

An unbalanced nested sampling design was used to investigate the spatial scale of soil and herbicide interactions at the field scale. A hierarchical analysis of variance based on residual maximum likelihood (REML) was used to analyse the data and provide a first estimate of the variogram. Soil samples were taken at 108 locations at a range of separating distances in a 9 ha field to explore small and medium scale spatial variation. Soil organic matter content, pH, particle size distribution, microbial biomass and the degradation and sorption of the herbicide, isoproturon, were determined for each soil sample. A large proportion of the spatial variation in isoproturon degradation and sorption occurred at sampling intervals less than 60 m, however, the sampling design did not resolve the variation present at scales greater than this. A sampling interval of 20-25 m should ensure that the main spatial structures are identified for isoproturon degradation rate and sorption without too great a loss of information in this field.     

Hot filter/impinger and dilution sampling for fine particulate matter characterization from ferrous metal casting processes

A study using two stack-sampling methodologies for collecting particulate matter (PM) emissions was conducted using a hot filter followed by a cold impinger sampling train and a dilution sampler. Samples were collected from ferrous iron metal casting processes that included pouring molten iron into a sand mold containing an organic binder, metal cooling, removal of the sand from the cooled casting (shakeout), and postshakeout cooling. The shakeout process contributed more to PM emissions than the metal pouring and cooling processes. Particulate matter less than 2.5 microm in aerodynamic diameter (PM2.5) mass emissions for the entire casting cycle ranged from 3.4 to 4.7 lb/t of metal for the hot filter/impinger method and from 0.8 to 1.8 lb/t of metal for the dilution method. Most of the difference was due to PM captured by the impingers, much of which was probably dissolved gases rather than condensable vapors. Of the PM fraction captured by the impingers, 96-98% was organic in nature. The impinger PM fraction contributed 32-38% to the total suspended particle mass and caused a factor of 2-4 positive bias for PM2.5 emissions. For the pouring and cooling processes only, the factor increased to over seven times.     

Environmental monitoring study of selected veterinary antibiotics in animal manure and soils in Austria

LC-MS/MS was used for determination of selected tetracyclines, sulfonamides, trimethoprim, and fluoroquinolones in manure samples of pig, chicken and turkey, as well as arable soils fertilized with manure. Recoveries from spiked samples ranged from 61 to 105%. Method quantification limits were set to 100 microg/kg for all substances. Analysis of 30 pig manure, 20 chicken and turkey dung, and 30 lyophilized soil samples taken in Austria revealed that in pig manure up to 46 mg/kg chlortetracycline, 29 mg/kg oxytetracycline and 23 mg/kg tetracycline could be detected. As representatives of the group of sulfonamides, sulfadimidine in pig manure and sulfadiazine in chicken and turkey dung were detected in significant amounts (maximum concentration, 20 and 91 mg/kg, respectively). Enrofloxacin was particularly observed in chicken and turkey samples. Positive detection of chlortetracycline, enrofloxacin, and ciprofloxacin, in soil samples should be outlined as most important results of this study.     

HPLC determination of chlorate metabolism in bovine ruminal fluid

Salmonella and Escherichia coli are two bacteria that are important causes of human and animal disease worldwide. Chlorate is converted in the cell to chlorite, which is lethal to these bacteria. An HPLC procedure was developed for the rapid analysis of chlorate (ClO(3)(-)), nitrate (NO(3)(-)), and nitrite (NO(2)(-)) ions in bovine ruminal fluid samples. Standard curves for chlorite, nitrite, nitrate, and chlorate were well defined linear curves with R(2) values of 0.99846, 0.99106, 0.99854, and 0.99138, respectively. Concentrations of chlorite could not be accurately determined in bovine ruminal fluid because chlorite reacts with or binds a component(s) or is reduced to chloride in bovine ruminal fluid resulting in low chlorite measurements. A standard curve ranging from 25 to 150 ppm ClO(3)(-) ion was used to measure chlorate fortified into ruminal fluid. The concentration of chlorate was more rapidly lowered (P < 0.01) under anaerobic compared to aerobic incubation conditions. Chlorate alone or chlorate supplemented with the reductants sodium lactate or glycerol were bactericidal in anaerobic incubations. In anaerobic culture, the addition of sodium formate to chlorate-fortified ruminal fluid appeared to decrease chlorate concentrations; however, formate also appeared to moderate the bactericidal effect of chlorate against E. coli. Addition of the reductants, glycerol or lactate, to chlorate-fortified ruminal fluid did not increase the killing of E. coli at 24 h, but may be useful when the reducing equivalents are limiting as in waste holding reservoirs or composting systems required for intense animal production.