Increasing biogas production from sewage sludge anaerobic co-digestion process by adding crude glycerol from biodiesel industry

In an effort to convert waste streams to energy in a green process, glycerol from biodiesel manufacturing has been used to increase the gas production and methane content of biogas within a mesophilic anaerobic co-digestion process using primary sewage sludge. Glycerol was systematically added to the primary digester from 0% to 60% of the organic loading rate (OLR). The optimum glycerol loading range was from 25% to 60% OLR. This resulted in an 82–280% improvement in specific gas production. Following the feeding schedule described, the digesters remained balanced and healthy until inhibition was achieved at 70% glycerol OLR. This suggests that high glycerol loadings are possible if slow additions are upheld in order to allow the bacterial community to adjust properly. Waste water treatment plant operators with anaerobic digesters can use the data to increase loadings and boost biogas production to enhance energy conversion. This process provides a safe, environmentally friendly method to convert a typical waste stream to an energy stream of biogas.     

Genetic profile of overweight and obese school-age children

Obesity is associated with overproduction of free radicals that promotes genotoxicity and could be measured as micronuclei (MN) and nuclear abnormalities (NA) in buccal mucosa cells. The frequency of MN and NA in buccal mucosa cells from overweight and obesity school-age children was determined. In a cross-sectional study, four anthropometric parameters were obtained from each child and one buccal mucosa sample was collected from each child. The slides were stained with orcein and fast green and microscopically analyzed for MN and NA. Twenty overweight and obesity school-age children (7–11 years old) from three schools located at the metropolitan area of Guadalajara were selected to form three groups with 20 children each, according to the weight features as follows: (1) normal weight; (2) overweight; and (3) obesity. No marked differences were found between groups for frequency of MN and NA. Genotoxicity, as indicated by increase in binucleated (BN) cells, was found in children within both overweight and obese groups exposed to passive tobacco smoke. There was no evidence of genetic instability in overweight and obese school-age children and no associations between body weight and genotoxicity markers found.     

Selenium accumulation in the cockle Anadara trapezia

An extensive study on Se accumulation in a population of Anadara trapezia from a marine lake is reported. The effects of organism mass, gender, reproductive cycle, and season on Se accumulation and tissue distribution were investigated. Analyses showed that gender and reproductive cycle had no significant effect on Se accumulation. A. trapezia showed a strong positive correlation between Se burden and tissue mass. Constant Se concentrations were observed within individual populations but varied spatially with sediment Se concentrations. Se concentrations in tissues decreased from gills > gonad/intestine > mantle > muscle > foot, which remained constant over 12 months, however, significantly lower concentrations were observed in the summer compared to winter. A. trapezia is a good biomonitor for Se, as gender and size do not effect concentration, however, season of collection must be reported if changes in Se bioavailability are to be identified in short term studies, or during intersite comparisons.     

Identification and quantification of 19 pharmaceutical active compounds and metabolites in hospital wastewater in Cameroon using LC/QQQ and LC/Q-TOF

Human pharmaceutical residues are a serious environmental concern. They have been reported to have eco, geno, and human toxic effects, and thus their importance as micropollutants cannot be ignored. These have been studied extensively in Europe and North America. However, African countries are still lagging behind in research on these micropollutants. In this study, the wastewaters of the University Teaching Hospital of Yaoundé (UTHY) were screened for the presence of active pharmaceutical ingredients and their metabolites. The screening was carried out using two methods: high-performance liquid chromatography coupled to a triple quadrupole analyzer (LC/QQQ) and high-performance coupled to a mass spectrometer with a time of flight analyzer (LC/Q-TOF). A total of 19 active pharmaceutical ingredients and metabolites were identified and quantified. The compounds identified include paracetamol (211.93 μg/L), ibuprofen (141 μg/L), tramadol (76 μg/L), O-demethyltramadol (141 μg/L), erythromycinanhydrate (7 μg/L), ciprofloxacin (24 μg/L), clarinthromycine (0.088 μg/L), azitromycine (0.39 μg/L), sulfamethoxazole 0.16 μg/L), trimetoprime (0.27 μg/L), caffeine (5.8 μg/L), carnamaeepine (0.94 μg/L), atenolol (0.43 μg/L), propranolol (0.3 μg/L), cimetidine (34 μg/L), hydroxy omeprazole (5 μg/L), diphenhydramine (0.38 μg/L), metformine (154 μg/L), and sucralose (13.07 μg/L).     

Selenium speciation in wheat grain varies in the presence of nitrogen and sulphur fertilisers

This study investigated whether selenium species in wheat grains could be altered by exposure to different combinations of nitrogen (N) and sulphur (S) fertilisers in an agronomic biofortification experiment. Four Australian wheat cultivars (Mace, Janz, Emu Rock and Magenta) were grown in a glasshouse experiment and exposed to 3 mg Se kg^?1 soil as selenate (Se^VI). Plants were also exposed to 60 mg N kg^?1 soil as urea and 20 mg S kg^?1 soil as gypsum in a factorial design (N + S + Se; N + Se; S + Se; Se only). Plants were grown to maturity with grain analysed for total Se concentrations via ICP-MS and Se species determined via HPLC-ICP-MS. Grain Se concentrations ranged from 22 to 70 µg Se g^?1 grain (dry mass). Selenomethionine (SeMet), Se-methylselenocystine (MeSeCys), selenohomolanthionine (SeHLan), plus a large concentration of uncharacterised Se species were found in the extracts from grains. SeMet was the major Se species identified accounting for between 9 and 24 µg Se g^?1 grain. Exposure to different N and S fertiliser combinations altered the SeMet content of Mace, Janz and Emu Rock grain, but not that of Magenta. MeSeCys and SeHLan were found in far lower concentrations (<4 µg Se g^?1 grain). A large component of the total grain Se was uncharacterisable (>30 % of total grain Se) in all samples. When N fertiliser was applied (with or without S), the proportion of uncharacterisable Se increased between 60 and 70 % of the total grain Se. The data presented here indicate that it is possible to alter the content of individual Se species in wheat grains via biofortification combined with manipulation of N and S fertiliser regimes. This has potential significance in alleviating or combating both Se deficiency and Se toxicity effects in humans.     

Trace metal bioaccumulation in eight common coastal Australian polychaeta

Whole tissue trace metal concentrations of ten metals in eight common coastal Australian polychaete species collected from uncontaminated locations were measured. The mean concentration range for each trace metal was: Mn: 2.6-13 microg g(-1); Co: 0.8-4.6 microg g(-1); Cu: 3.4-26 microg g(-1); Zn: 47-225 microg g(-1); As: 18-101 microg g(-1); Se: 2.2-20.4 microg g(-1); Ag: 0.03-2.5 microg g(-1); Cd: 0.07-17 microg g(-1); Hg: 0.08-0.88 microg g(-1) and Pb: 0.09-3.2 microg g(-1)dry mass. Principal components analysis of trace metal signatures revealed that the habitat, i.e. exposed coast sand or rock, estuarine sand or estuarine mud substrate in which a polychaete species was found, had a significant influence on the bioaccumulation of six trace metals (Mn, Cu, Zn, Ag, Cd and Pb). However, there is no clear relationship between trace metal concentrations in substrates and polychaetes. The results of the current study contribute to a reference dataset of polychaete species-specific natural background trace metal concentrations for use in determining the extent of trace metal contamination by urban and industrial sources.     

Measurement of total antimony and antimony species in mine contaminated soils by ICPMS and HPLC-ICPMS

This paper describes the measurement of total antimony and antimony species in "real world" mine contaminated sediments using ICPMS and HPLC-ICPMS. Low and high temperature microwave extraction procedures (90 degrees C and 150 degrees C, respectively) using a range of nitric-hydrochloric acid combinations were examined as to their efficacy to extract antimony from six mine contaminated soils and a certified reference material. The use of the higher temperature with nitric-hydrochloric acid (1:2 (v/v)) was suitable to release antimony from sediments and the certified reference material, NIST 2710 Montana soil. Antimony concentrations obtained using this acid mixture were similar to those obtained using a more aggressive extraction with nitric, hydrochloric, perchloric and hydrofluoric acid mixture. A 25 mM citric acid solution at 90 degrees C for 15 min extracted 47-78% of antimony from soils. A Hamilton PRP X-100 anion exchange column with 20 mM EDTA mobile phase, pH 4.5, flow rate 1.5 mL min(-1) and column temperature of 50 degrees C was used to separate antimony species. Column recoveries ranged from 78-104%. The predominant form of antimony was Sb(5+). Little conversion of Sb(5+) occurred (<5%) during extraction, however, significant conversion of Sb(3+) occurred (approximately 36%). The extraction of antimony species with citric acid should be useful in the determination of inorganic antimony available to plants, as plants commonly excrete carboxylic acids, including citric acid, into their rhizospheres to mobilise trace elements for nutritional purposes.     

Isolation and fractionation of natural organic matter: evaluation of reverse osmosis performance and impact of fractionation parameters

Dissolved organic matter (DOM) from three surface waters was isolated using reverse osmosis (RO) and subsequently fractionated using resin adsorption chromatography (RAC). Efficacy of RO was evaluated by closing mass balances for dissolved organic carbon (DOC). RAC was evaluated by investigating the effect of column operational parameters (column capacity factor, k', and solute initial concentration, C0) on DOM fractionation and subsequent disinfection by-product formation. Efficacy of RO was dependent on both isolation conditions and source water characteristics. In general, RO more effectively isolated DOM in high specific ultraviolet absorbance (SUVA254) water than low SUVA254 water, and showed higher DOM recovery at ambient pH (approximately 7) than at low pH (approximately 4). The fractionation of the isolated DOM indicated that the relative amount of the hydrophobic fraction decreased with increasing k', thus affecting the overall distribution of DOM. However, the distribution of DOM fractions was not influenced by varying C0 up to 150 mg l(-1) at k' of 15. The effect of k' on the formation and speciation of trihalomethanes (THM) and haloacetic acids (HAA) was not significant up to k' of 30.