Efficacy of created and restored nesting sites for the conservation of colonial Laridae in the South of France

By rapidly modifying key habitat components, habitat restoration is at risk of producing attractive cues for animals without providing habitats of sufficient quality. As such, individual fitness components, such as reproduction, could be reduced and restored habitats could become ecological traps. This risk notably appears by using artificial constructions in restoration projects, yet few studies have evaluated their efficacy in a robust way. We investigated this by analyzing 154 islets that were created or restored to improve the conservation status of 7 colonial Laridae species in the South of France. From 2007 to 2016, we compared occupancy dynamics and breeding parameters of these species between the restored sites and 846 unmanaged nesting sites. We also explored species’ preference for different nesting site characteristics and their respective effect on breeding parameters. Restored nesting sites were 2–9 times as attractive as unmanaged sites for all species except the Black-headed Gull (Chroicocephalus ridibundus). Colonization probability was up to 100 times higher in sites already used by other species the previous year and increased with distance to the shore until >0.2 when distance was over 250 m. Abandonment probability was 29–70% lower when breeding was successful the previous year in all species except the Sandwich Tern (Thalasseus sandvicensis). Productivity and breeding success probability were 2 times higher on managed sites. Distance from the shore was an important attractive characteristic of artificial nesting sites in all species. Other nesting site characteristics had species-specific effects on colonization, abandonment, and breeding success. Our results indicate that managed nesting sites are successful conservation tools for colonial Laridae in the Mediterranean and do not act as ecological traps. Our study showed that testing the ecological trap hypothesis is a robust way to evaluate the success of restoration projects of breeding habitats.     

Genotoxicity of sediment extracts of the Berre lagoon (France)

To evaluate the genotoxic risk that contaminated sediment could constitute for benthic organisms, three contaminated (VA, VC and VN) and one uncontaminated (RN) sediment samples were collected in the Berre lagoon (France). Potentially bioavailable contaminants in sediments were obtained using sediment extraction with synthetic seawater adjusted to pH 4 or pH 6, simulating the range of pH prevailing in the digestive tract of benthic organisms. The genotoxic activities of these extracts were evaluated by three short-term bioassays: the Salmonella mutagenicity test using the Salmonella typhimurium strain TA102, the alkaline comet assay and the micronucleus assay on the Chinese Hamster Ovary cells CHO-K1. Results of the Salmonella mutagenicity assay detected a mutagenic response for RN extract at pH 6, and for VA extract at pH 4. Results of the comet and micronucleus assays detected low genotoxic/clastogenic activities for VA and VC extracts at pH 6 and higher activities for RN, VA and VC extracts at pH 4. To identify if metals (Al, Fe, Mn, As, Cd, Co, Cr, Cu, Hg, Ni, Pb and Zn) were involved in these genotoxic activities, their concentrations were determined in the extracts, and their speciation was assessed by thermodynamic calculations. Results showed that extracts from sites VA, VC and VN generally presented the highest trace metal contents for both extractants, while the site RN presented lower trace metal contents but the highest Fe and Mn contents. Thermodynamic calculations indicated that Fe, Mn, As and in a lower extend Co, Ni and Zn were mainly present under free forms in extracts, and were consequently, more likely able to induce a genotoxic effect. Results globally showed no correspondence between free metal contents and genotoxic activities. They suggested that these positive results could be due to uncharacterized compounds, acting as direct genotoxic agents or enhancing the genotoxic properties of analyzed metals.     

A double‐edged sword: Realities of artisanal and small‐scale mining for rural people in the Alaotra region of Madagascar

A growing number of people are entering the artisanal and small‐scale mining (ASM) sector worldwide. In Madagascar, millions of individuals depend on this informal activity. Through a case study in the Alaotra‐Mangoro region of Madagascar, our research aimed to understand the “bottom‐up” dynamics and ripple effects of the sector, by looking at the realities for rural communities where inhabitants are both directly and indirectly affected by ASM. We were interested in community members' and miners' perceptions of the socio‐economic and environmental impacts of ASM, and in identifying the factors attracting people living in one of the country's agricultural hubs to this activity. Our results show a wide diversity of push and pull factors leading people to enter the sector. Although many positive impacts of ASM exist for miners and communities within the vicinity of mines, most miner participants considered themselves worse off since starting to mine, highlighting the high risk and low probability of return of ASM. ASM's potential for local and national development will remain squandered if its negative impacts continue to go unmanaged. Accounting for local contexts and the ripple effects of ASM will be crucial in achieving safety and security for miners, and to tap into the benefits it may offer communities while minimising environmental damage.     

A GIS-Based Multicriteria Evaluation for Aiding Risk Management <Emphasis Type="Italic">Pinus pinaster</Emphasis> Ait. Forests: A Case Study in Corsican Island,Western Mediterranean Region

Forest management can benefit from decision support tools, including GIS-based multicriteria decision-aiding approach. In the Mediterranean region, Pinus pinaster forests play a very important role in biodiversity conservation and offer many socioeconomic benefits. However, the conservation of this species is affected by the increase in forest fires and the expansion of Matsucoccus feytaudi. This paper proposes a methodology based on commonly available data for assessing the values and risks of P. pinaster forests and to generating maps to aid in decisions pertaining to fire and phytosanitary risk management. The criteria for assessing the values (land cover type, legislative tools for biodiversity conservation, environmental tourist sites and access routes, and timber yield) and the risks (fire and phytosanitation) of P. pinaster forests were obtained directly or by considering specific indicators, and they were subsequently aggregated by means of GIS-based multicriteria analysis. This approach was tested on the island of Corsica (France), and maps to aid in decisions pertaining to fire risk and phytosanitary risk (M. feytaudi) were obtained for P. pinaster forest management. Study results are used by the technical offices of the local administration—Corsican Agricultural and Rural Development Agency (ODARC)—for planning the conservation of P. pinaster forests with regard to fire prevention and safety and phytosanitary risks. The decision maker took part in the evaluation criteria study (weight, normalization, and classification of the values). Most suitable locations are given to target the public intervention. The methodology presented in this paper could be applied to other species and in other Mediterranean regions.     

Tree-based intercropping systems increase growth and nutrient status of hybrid poplar: A case study from two Northeastern American experiments

Tree-based intercropping is considered to be a potentially useful land use system for mitigating negative environmental impacts from intensive agriculture such as nutrient leaching and greenhouse gas emissions. Rapid early growth of trees is critical for rapidly accruing environmental benefits provided by the trees. We tested the hypothesis that intercropping increases the growth and nutrient status of young hybrid poplars (Populus spp.), compared to a harrowing alley treatment (i.e., no intercrop), in two experimental sites (St-Rémi and St-Édouard) in southern Québec, Canada. Three hybrid poplar clones (TD3230, Populus trichocarpa × deltoides; DN3308, P. deltoides × nigra; and NM3729, P. nigra × maximowiczii) were planted at St-Rémi. Clones DN3333 and DN3570 were planted at St-Édouard. At St-Rémi, intercropping comprised a 4-year succession of three crops of soybean (Glycine max (L.) Merr.) and barley (Hordeum vulgare L.). At St-Édouard, intercropping comprised a 3-year succession of buckwheat (Fagopyrum esculentum Moench), winter rye (Secale cereale L.), and winter wheat (Triticum aestivum L.). At St-Rémi, four years after treatment began, leafless aboveground biomass of hybrid poplars in the intercropping treatment was 37% higher compared to that in the harrowing treatment. At St-Édouard, after the third growing season, leafless aboveground biomass of hybrid poplars in the intercropping treatment was significantly higher by 40%. Vector analysis of foliar nutrient concentrations and comparison with critical concentration values showed that N (both sites) and K (St-Édouard) were the most limiting nutrients. Hybrid poplar clones responded similarly to treatments, with no consistent differences in tree growth observed between clones. We conclude that tree-based intercropping systems may offer an effective means of improving the early growth of hybrid poplars planted to provide both environmental services and high-value timber.     

Development of a new standardised method for sustainable monitoring of the vulnerable pink sea fan Eunicella verrucosa

The aim of this survey was to test a standardised method to follow the demographic evolution of a dense aggregative ‘forest’ population of the temperate gorgonian Eunicella verrucosa (Octocorallia, Gorgoniidae) using in situ photographic recordings. Distribution, density, growth and demographic evolution of the colonies was compared along two parallel transects. Computer treatment allowed the estimation of the total branch fan surface area, and the individual growth of tagged colonies was determined by measuring the increase in this surface area, using consecutive photographs taken at two-year intervals. To integrate the potential bias of branch overlapping, we proposed a correction factor between the in situ photographic surface area and the surface area of the gorgonian calculated from ex situ photographic surface area with all branches deployed. The surface-frequency distribution of colonies was converted to estimated-age-frequency distribution using an estimated growth curve based on the net growth rate. The technique used revealed significant differences in population structure and the dynamics of gorgonian colonies, as the two transects appeared to be influenced by different environmental conditions. The recruitment also seemed to vary according to year and transect, resulting in different densities. Our work showed clear results in characterising the variations of gorgonian demographic evolution at a small spatial scale; thus, it is assumed that this method could be a sustainable tool for coastal environmental managers.     

The metal mining industry in Eastern Europe

The mining industry has been one of the backbones of the socialist countries of Eastern Europe, not only in economic, but also in political, terms. Three years after the beginning of economic reforms, the mining industry in all the Eastern European countries is facing dramatic changes. Most mines are mining ores below acceptable cut-off grades, and there is no hope of finding new, richer deposits. Downstream metallurgical industries will need to replace their former suppliers. In addition, the social contract that had been maintained under the socialist governments is about to be undone and a new form of internal organization must be found. The success of the economic reforms in Eastern Europe depends upon the capacity to develop new industrial relations: the large mining combinates will have to be transformed into competitive capitalist enterprises and the role of the state must be redefined. Prospects for this transformation vary greatly, from metal to metal and from country to country. Finally, restructuring in Eastern Europe will also affect European and world markets, both on the supply and demand sides. The integration of the Eastern European mining industries into the international mining community should be the medium-term goal of all the participants .     

Ammonia large scale atmospheric dispersion experiments in industrial configurations

A programme of large-scale experiments for atmospheric dispersion was carried out by INERIS over a period extending from December 1996 to April 1997. The objectives of the test campaign were to measure anhydrous ammonia concentrations in a range of few meters to 2 km from the release, in order to generate data to be used to improve 2-phase discharge and dispersion modelling.

The discharges were released from a 6-tonne storage tank of pressurised liquid ammonia and through a discharge device with an outlet diameter of 2 in. Fifteen trials were carried out with various release configurations corresponding to industrial situations (impinging jets on the ground and on a wall at various distances, release through a flange without seal…). The quantity of ammonia discharged from the liquid phase varied according to the tests, from 1.4 to 3.5 tons for durations between 7 and 14 min and, therefore, at flow rates between 2 and 4.5 kg/s. Approximately 200 sensors were settled downwind to measure ammonia concentrations and temperature in the plume. These tests showed that for discharges with identical flow rates the distances corresponding to the same concentration vary a lot according to the configurations. These distances tend to be reduced by the presence of obstacles or retention dikes that collected liquid ammonia. In the paper, the main experimental results are presented. In order to enable the comparisons with numerical predictions, more detailed information are given in [Bouet R. (1999). Ammoniac—Essais de dispersion atmosphérique à grande échelle. INERIS rapport, ref INERIS-DRA-RBo-1999-20410 (available at http://www.ineris.fr/recherches/recherches.htm).     

Innovative design of an LDPE reactor bay against gas explosion using a risk-based approach coupled with high fidelity computer tools

High pressure tubular reactors for the production of Low Density Polyethylene (LDPE) are, for safety reasons, enclosed in a protective bay open towards the sky. They are becoming longer and larger due to production capacity increases. TECHNIP has historically designed these reactor bays based on Licensor information, which include more or less empirical correlations. Further capacity developments require the design of these concrete enclosures to be challenged. With this in mind, the present study shows the interest of implementing an innovative methodology based upon a risk-based approach to define new design criteria for the enclosure walls. The method, which combines both risk analysis with computational fluid dynamics modelling (3D CFD) and non-linear finite element analysis (NLFEA) tools, allows a clear determination of the design overpressure loads applied on walls and offers an optimisation of the concrete wall thickness. The CFD study also leads to a better understanding of the ventilation and efficiency of safety systems (gas detection, depressurisation) with possibility for improvement of the hazardous area classification rating.