Indoor particle size distributions in homes with open fires and improved Patsari cook stoves

Particulate pollution has been clearly linked with adverse health impacts from open fire cookstoves, and indoor air concentrations are frequently used as a proxy for exposures in health studies. Implicit are the assumptions that the size distributions for the open fire and improved stove are not significantly different, and that the relationship between indoor concentrations and personal exposures is the same between stoves. To evaluate the impact of these assumptions size distributions of particulate matter in indoor air were measured with the Sioutas cascade impactor in homes using open fires and improved Patsari stoves in a rural Purepecha community in Michoacan, Mexico. On average indoor concentrations of particles less than 0.25 μm were 72% reduced in homes with improved Patsari stoves, reflecting a reduced contribution of this size fraction to PM_2.5 mass concentrations from 68% to 48%. As a result the mass median diameter of indoor PM_2.5 particulate matter was increased by 29% with the Patsari improved stove compared to the open fire (from 0.42 μm to 0.59 μm, respectively). Personal PM_2.5 exposure concentrations for women in homes using open fires were approximately 61% of indoor concentration levels (156 μg m^?3 and 257 μg m^?3 respectively). In contrast personal exposure concentrations were 77% times indoor air concentration levels for women in homes using improved Patsari stoves (78 μg m^?3and 101 μg m^?3 respectively). Thus, if indoor air concentrations are used in health and epidemiologic studies significant bias may result if the shift in size distribution and the change in relationship between indoor air concentrations and personal exposure concentrations are not accounted for between different stove types.     

Multivariate statistics to investigate metal contamination in surface soil

The modification of soil composition in the urbanized area of Ankara due to wet-dry deposition and pollution-derived particles from the atmosphere is investigated by analyzing 120 surface soil samples, collected from the urbanized area and its un-urbanized surrounding, for major, minor and trace elements. Concentrations of elements from human activity (e.g. Cd, Pb, Cr, Zn, Cu and Ca) in the urbanized area were higher than their corresponding concentrations in global average soil and soil in un-urbanized areas outside the urbanized area. Metal contents in soil were very high in densely populated districts and around some industrial facilities. The only exception was Pb distribution, which was more dispersed, due to the nature of motor vehicle emissions. Alteration of the Cd, Zn, Cu and Cr content of soil was confined to the inhabited and industrial areas, whereas enrichment factors of these elements were close to unity in the remaining study area. Factor analysis identified two polluted soil factor associations. One factor includes elements, such as Zn and Cd, which had high factor scores in inhabited areas and the other factor (high loading of Pb) represents soil polluted by motor vehicle emissions.     

An assessment of the concentrations of particulate polycyclic aromatic hydrocarbons (PAHs) in the aftermath of a chemical store fire incident

PM10 airborne particles and soot deposit collected after a fire incident at a chemical store were analyzed in order to determine the concentrations of polycyclic aromatic hydrocarbons(PAHs). The samples were extracted with 1 : 1 hexane-dichloromethane by ultrasonic agitation. The extracts were then subjected to gas chromatography-mass spectrometric(GC-MS) analysis. The total PAHs concentrations in airborne particles and soot deposit were found to be 3.27 1.55 ng/m^3 and 12.81 24.37 μg/g, respectively. Based on the molecular distributions of PAHs and the interpretation of their diagnostic ratios such as PHEN/(PHEN ANTH), FLT/(FLT PYR) and BeP/(BeP BaP), PAHs in both airborne particles and soot deposit may be inferred to be from the same source. The difference in the value of IP/(IP BgP) for these samples indicated that benzo[ g, h, i] perylene and coronene tend to be attached to finer particles and reside in the air for longer periods. Comparison between the molecular distributions of PAHs and their diagnostic ratios observed in the current study with those reported for urban atmospheric and roadside soil particles revealed that they are of different sources.     

Five-year monitoring study of chemical characteristics of Wet atmospheric precipitation in the southern region of Jordan

Wet atmospheric samples were collected from different locations in the southern region of Jordan during a 5-year period (October 2006 to May 2011). All samples were analyzed for pH, EC, major ions (Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ^?, Cl^?, NO₃ ^?, and SO₄ ^2?), and trace metals (Fe²⁺, Al³⁺,Cu²⁺, Pb²⁺, and Zn²⁺). The highest ion concentrations were observed during the beginning of the rainfall events because large amounts of dust accumulated in the atmosphere during dry periods and were scavenged by rain. The rainwater in the study area is characterized by low salinity and neutral pH. The major ions found in rainwater followed the order of HCO₃?>?Cl^??>?SO₄ ^2? and Ca²⁺?>?Na⁺ > Mg²⁺ > NH₄ ⁺ > K⁺. Trace metals were identified to be of anthropogenic origin resulting from cement and phosphate mining activities located within the investigated area and from heating activities during the cold period of the year (January to April). The wet precipitation chemistry was analyzed using factor component analysis for possible sources of the measured species. Factor analysis (principal component analysis) was used to assess the relationships between the concentrations of the studied ions and their sources. Factor 1 represents the contribution of ions from local anthropogenic activities, factor 2 represents the contribution of ions from natural sources, and factor 3 suggests biomass burning and anthropogenic source. Overall, the results revealed that rainwater chemistry is strongly influenced by local anthropogenic sources rather than natural and marine sources, which is in a good agreement with the results obtained by other studies conducted in similar sites around the world.     

Correction to: Increasing water productivity,nitrogen economy,and grain yield of rice by water saving irrigation and fertilizer-N management

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

Development of prolonged standing strain index to quantify risk levels of standing jobs

Many occupations in industry such as metal stamping workers, electronics parts assembly operators, automotive industry welders, and lathe operators require working in a standing posture for a long time. Prolonged standing can contribute to discomfort and muscle fatigue particularly in the back and legs. This study developed the prolonged standing strain index (PSSI) to quantify the risk levels caused by standing jobs, and proposed recommendations to minimize the risk levels. Risk factors associated with standing jobs, such as working posture, muscles activity, standing duration, holding time, whole-body vibration, and indoor air quality, were the basis for developing the PSSI. All risk factors were assigned multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness. multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness.     

Trace metals solubility in rainwater: evaluation of rainwater quality at a watershed area, Istanbul

In this study, 79 bulk precipitation samples were collected at two sampling sites near Büyükçekmece Lake, one of the important drinking water sources of Istanbul, for the period of October 2001 to July 2002. The study comprised the determination of trace and toxic metals concentrations in rain water. The concentrations of the metals in this study were found to be higher than those reported by other researchers around the world. The solubility of toxic metals was found in the order of Cd > Cu > V > Zn > Ni > Pb > Cr. Solubility of metals under acidic conditions (pH < 5.5) was approximately five times higher than those under neutral conditions with Cd as the most soluble metal (50% soluble). Statistical evaluations including seasonal variations, crustal enrichment factors, and correlation matrix were discussed to identify the possible sources of these pollutants. The study revealed that anthropogenic elements were highly enriched especially for Cd > Cu > Pb which were found to be highly enriched. Significant portion of Cu and Pb could be increased by the effect of local sources like cement industry in the area; however, the rest of the investigated trace metals could be brought to the sampling site by long-range transport to the Büyükçekmece Lake watershed area.     

Polymeric Materials as Potential Inhibitors Against SARS-CoV-2

Journal of Polymers and the Environment - Recently discovered SARS-CoV-2 caused a pandemic that triggered researchers worldwide to focus their research on all aspects of this new peril to humanity....     

Evaluation of wind power generation projects to reduce air pollution using multi-criteria decision-making methods in Saudi Arabia

Environmental Science and Pollution Research - Currently, Saudi Arabia has very limited renewable energy generation capacity, as most of the country’s electricity sector is dependent on cheap...