Role of loosely bound humic substances and humin in the bioavailability of phenanthrene aged in soil

A study was conducted to determine a possible role of loosely bound humic substances (i.e., humic and fulvic acids) in bioavailability of aged phenanthrene with time. In this study, long-term residence of phenanthrene in soil is defined as aging or sequestration, and the effect was determined by the declined bioavailability to bacteria of the polycyclic aromatic hydrocarbon with increased residence time. After 1, 7, and 100 days of aging of phenanthrene in Lima loam, about 90-93% of initial phenanthrene was recovered from the humin-mineral fraction of Lima loam whereas less than 12% was found in humic and fulvic acids of the same soil. Mineralization rates of phenanthrene aged in the humin-mineral fraction significantly decreased with time by the test bacterium P5-2. In terms of extents of mineralization, the difference with time was not appreciable, but still significant at P<0.05. Additional decreases in the rates and extents of mineralization were observed with the whole soil (i.e. Lima loam) to which phenanthrene had been aged. Data suggest that major sequestration sites for phenanthrene may reside in the humin-mineral fraction, and probably humic and fulvic acids may act as a physico-chemical barrier to bacterial degradation so that the compound's bioavailability may be limited.     

Characteristics of urban ground-level ozone in Korea

This study considers the characteristics of ground-level ozone (O3) in five Korean cities over a time period of 6-8 years. The focus of this study is daily maximum 1-hr and 8-hr concentrations. For all the study cities in the period examined, the mean and most of the percentiles (5, 10, 25, 50, 75, 90, and 95) for the daily maximum 1-hr and 8-hr concentrations showed increasing trends, although not all trends were statistically significant. The daily maximum 1-hr and 8-hr concentrations slowly increased during late winter, and peaks were attained during the summer season (from May to September). All the selected cities exhibited a high degree of correlation between their daily maximum 8-hr and 1-hr concentrations. The daily maximum 8-hr concentrations, which were climatologically equivalent to the Korean 1 hr/100 parts per billion (ppb) standard, were higher than the current 8 hr/60 ppb by a difference of 8-16 ppb. Compared with other cities in Korea, Seoul recorded a substantially higher frequency of days and hours with concentrations above 1 hr/100 ppb, and a higher frequency of days with concentrations above 8 hr/60 ppb and 8 hr/80 ppb. Seoul also recorded a substantially higher frequency of hours with concentrations above 1 hr/100 ppb than days with concentrations above 1 hr/100 ppb, implying that on some days severe exceedances persisted for more than one hour per day. During multiple-day episodes a North Pacific High dominated Korea, which is quite typical in Korea during the summer season.     

Biofiltration pretreatment for reverse osmosis (RO) membrane in a water reclamation system

Biofouling control is considered as a major challenge in operating membrane systems. A lab-scale RO system was setup at a local water reclamation plant to study the feasibility of using biofiltration as a pretreatment process to control the biofouling. The biological activity in the RO system (feed, product, reject streams) was tested using the standard serial dilution plating technique. Operational parameters such as differential pressure (DP) and permeate flowrate of the system were also monitored. Effects of biofilter on AOC and DOC removals were investigated. Biofiltration was found to be a viable way of assimilable organic carbon (AOC) and dissolved organic carbon (DOC) removals, with removal efficiencies of 40-49% and 35-45% at an empty bed contact time (EBCT) of 30 min. It was also found that using the biofiltration as a pretreatment reduced the rate of biofouling. It took only about 72 h for biofouling to have a significant impact on the performance of the RO membrane, when the system was operated without using biofiltration as pretreatment. There was, however, a five times increase in operational length to more than 300 h when biofiltration was used. This study presented the suitability of the biofilter as an economical and simple way of biofouling control for RO membrane.     

Impact of transverse and longitudinal dispersion on first-order degradation rate constant estimation

A two-dimensional analytical model is employed for estimating the first-order degradation rate constant of hydrophobic organic compounds (HOCs) in contaminated groundwater under steady-state conditions. The model may utilize all aqueous concentration data collected downgradient of a source area, but does not require that any data be collected along the plume centerline. Using a least squares fit of the model to aqueous concentrations measured in monitoring wells, degradation rate constants were estimated at a former manufactured gas plant (FMGP) site in the Midwest U.S. The estimated degradation rate constants are 0.0014, 0.0034, 0.0031, 0.0019, and 0.0053 day(-1) for acenaphthene, naphthalene, benzene, ethylbenzene, and toluene, respectively. These estimated rate constants were as low as one-half those estimated with the one-dimensional (centerline) approach of Buscheck and Alcantar [Buscheck, T.E., Alcantar, C.M., 1995. Regression techniques and analytical solutions to demonstrate intrinsic bioremediation. In: Hinchee, R.E., Wilson, J.T., Downey, D.C. (Eds.), Intrinsic Bioremediation, Battelle Press, Columbus, OH, pp. 109-116] which does not account for transverse dispersivity. Varying the transverse and longitudinal dispersivity values over one order of magnitude for toluene data obtained from the FMGP site resulted in nearly a threefold variation in the estimated degradation rate constant-highlighting the importance of reliable estimates of the dispersion coefficients for obtaining reasonable estimates of the degradation rate constants. These results have significant implications for decision making and site management where overestimation of a degradation rate may result in remediation times and bioconversion factors that exceed expectations. For a complex source area or non-steady-state plume, a superposition of analytical models that incorporate longitudinal and transverse dispersion and time may be used at sites where the centerline method would not be applicable.     

Photocatalytic oxidation of methyl orange in a three-phase fluidized bed reactor

The photocatalytic oxidation of methyl orange under weak illumination conditions was carried out in two different types of fluidized bed reactors. TiO2 powder was employed as the photocatalysts and a 15 W low pressure mercury lamp was used as the light source and the reactor volume was 2.5 l. The parametric study of photocatalytic oxidation of methyl orange in two different types of fluidized beds was investigated; effect of catalyst loadings, pH, air flow rate, initial concentration and oxygen concentration on the oxidation reaction rate. The experimental results were analyzed in conjunction with the characteristics of fluidized bed and the reactor geometry effect on the reaction rate was analyzed.     

Assessment of intrinsic bioremediation of a coal-tar-affected aquifer using Two-dimensional reactive transport and Biogeochemical mass balance approaches.

Expedited site characterization and groundwater monitoring using direct-push technology and conventional monitoring wells were conducted at a former manufactured gas plant site. Biogeochemical data and heterotrophic plate counts support the presence of microbially mediated remediation. By superimposing solutions of a two-dimensional reactive transport analytical model, first-order degradation rate coefficients ((day-1) ) of various compounds for the dissolved-phase plume were estimated (i.e., benzene [0.0084], naphthalene [0.0058], and acenaphthene [0.0011]). The total mass transformed by aerobic respiration, nitrate reduction, and sulfate reduction around the free-phase coal-tar dense-nonaqueous-phase-liquid region and in the plume was estimated to be approximately 4.5 kg/y using a biogeochemical mass-balance approach. The total mass transformed using the degradation rate coefficients was estimated to be approximately 3.6 kg/y. Results showed that a simple two-dimensional analytical model and a biochemical mass balance with geochemical data from expedited site characterization can be useful for rapid estimation of mass-transformation rates.     

Identification of Tsuga Germplasm by Morphological Characters and RAPD Markers

Germplasm collection is important to preserve and maximize genetic diversity for germplasm conservation. Tsuga dumosa （ D. Don） Eichler in Engler ＆ Prantl. and T. chinensis var. forrestii （Downie） Silba germplasm was collected from three localities in China： Mt. Yulong, Wenfeng Temple and Mt. Dishiergu, Yunnan Province. Accessions were identified based on morphological characters and RAPD markers. The shapes of the apices and margins of needles were examined, and the length and width of needles, cones and seeds from accessions of mature plants were used to compare the morphological differences and to identify the germplasm. Molecular markers generated by randomly amplified polymorphic DNA （RAPD） were also used to characterize the taxa. Although the clustering based on RAPD markers was inconsistent with the morphological characters of the needles, based on the overall morphological characters and on RAPD markers, the accessions from Mt. Yulong and Wenfeng Temple were identified as T. chinertsis var. forrestii, and those from Mt. Dishiergu identified as T. dumosa. Taxonomic identification of the accessions was made based on morphology and by RAPD markers concurred. The results indicate that the shapes of the apices and margins of needles particularly from young plants could not be used as a possible key to identify T. dumosa and T. chinertsis var. forrestii. Fig 6, Tab 3, Ref24     

Assessment of airborne environmental bacteria and related factors in 25 underground railway stations in Seoul,Korea

This study assessed bacterial concentrations in indoor air at 25 underground railway stations in Seoul, Korea, and investigated various related factors including the presence of platform screen doors (PSD), depth of the station, year of construction, temperature, relative humidity, and number of passengers. A total of 72 aerosol samples were collected from all the stations. Concentrations of total airborne bacteria (TAB) ranged from not detected (ND) to 4997 CFU m^?3, with an overall geometric mean (GM) of 191 CFU m^?3. Airborne bacteria were detected at 23 stations (92%) and Gram-negative bacteria (GNB) were detected at two stations (8%). TAB concentrations of four stations (16%) exceeded 800 CFU m^?3, the Korea indoor bio-aerosol guideline. The results of the study showed that TAB concentrations at the stations without PSD showed higher TAB concentrations than those with PSD, though not at statistically significant levels. TAB concentrations of deeper stations revealed significantly higher levels than those of shallower stations. Based on this study, it is recommended that mitigation measures be applied to improve the indoor air quality (IAQ) of underground railway stations in Seoul, with focused attention on deeper stations.     

Solar photocatalytic degradation of mono azo methyl orange and diazo reactive green 19 in single and binary dye solutions: adsorbability vs photodegradation rate

The objective of this study was to examine the effects of adsorbability and number of sulfonate group on solar photocatalytic degradation of mono azo methyl orange (MO) and diazo Reactive Green 19 (RG19) in single and binary dye solutions. The adsorption capacity of MO and RG19 onto the TiO₂ was 16.9 and 26.8 mg/g, respectively, in single dye solution, and reduced to 5.0 and 23.1 mg/g, respectively, in the binary dye solution. The data obtained for photocatalytic degradation of MO and RG19 in single and binary dye solution were well fitted with the Langmuir–Hinshelwood kinetic model. The pseudo-first-order rate constants of diazo RG19 were significant higher than the mono azo MO either in single or binary dye solutions. The higher number of sulfonate group in RG19 contributed to better adsorption capacity onto the surface of TiO₂ than MO indicating greater photocatalytic degradation rate.     

Tracking the response of industrial fishing fleets to large marine protected areas in the Pacific Ocean

Large marine protected areas (MPAs) of unprecedented size have recently been established across the global oceans, yet their ability to meet conservation objectives is debated. Key areas of debate include uncertainty over nations’ abilities to enforce fishing bans across vast, remote regions and the intensity of human impacts before and after MPA implementation. We used a recently developed vessel tracking data set (produced using Automatic Identification System detections) to quantify the response of industrial fishing fleets to 5 of the largest MPAs established in the Pacific Ocean since 2013. After their implementation, all 5 MPAs successfully kept industrial fishing effort exceptionally low. Detected fishing effort was already low in 4 of the 5 large MPAs prior to MPA implementation, particularly relative to nearby regions that did not receive formal protection. Our results suggest that these large MPAs may present major conservation opportunities in relatively intact ecosystems with low immediate impact to industrial fisheries, but the large MPAs we considered often did not significantly reduce fishing effort because baseline fishing was typically low. It is yet to be determined how large MPAs may shape global ocean conservation in the future if the footprint of human influence continues to expand. Continued improvement in understanding of how large MPAs interact with industrial fisheries is a crucial step toward defining their role in global ocean management.