Carbonization of johkasou sludge using batch-type equipment

The carbonization of dehydrated johkasou sludge was examined using batch-type equipment. Based on the temperature changes in the carbonization room and the gas combustion room, the carbonization process was divided into three phases: phase I, drying the sludge; phase II, thermal decomposition of the dried sludge; phase III, after phase II. The times required for phases I and II were strongly correlated with the amounts of water and solid matter, respectively, in dehydrated sludge. The reduction rate of the sludge on completion of phase I was about 90% on average, and the decomposition rate of solid matter increased with time during phase II or phase II plus phase III until it reached about 50%. TOC concentration of the eluate from the carbonized sludge was used as an index to evaluate the progress of the carbonization process, and the highest temperature in the carbonization room was recognized as an important operational factor. The specific surface area and pore volume of carbonized sludge were smaller than those of charcoals and activated carbons by 1–3 orders of magnitude and 1–2 orders of magnitude, respectively. No elution of heavy metals was observed from any of the carbonized sludges examined. The reduced amount of carbon in dehydrated johkasou sludge was estimated to be about 25% of the decomposed organic matter.     

Production of male neonates in four cladoceran species exposed to a juvenile hormone analog, fenoxycarb

Previous studies have found that exposure of a cyclic parthenogen, the water flea Daphnia magna (Cladocera, Crustacea), to juvenile hormones and their analogs results in the production of neonates of male sex at concentration-dependent rates. We conducted reproduction experiments in four different species (Moina macrocopa, M. micrura, Ceriodaphnia dubia and C. reticulata) of cladoceran to test for the first time whether the occurrence of this phenomenon after exposure of the parent to such hormones is a generalized phenomenon. In the presence of a juvenile hormone analog, fenoxycarb, all four species produced male neonates and showed reduced rates of reproduction. The estimated median effective concentration (EC50) for the production of male neonates varied with species, ranging from 0.60 x 10(3) to 9.3 x 10(3) ng/l. Although there was a wide range of sensitivity to fenoxycarb, the production of male neonates in all four species demonstrates that this phenomenon is a common response to juvenile hormone analogs and further suggests that these hormones are capable of initiating sexual reproduction in cladocerans, most of which exhibit cyclic parthenogenesis.     

Global pollution monitoring of polychlorinated dibenzo-p-dioxins (PCDDs), furans (PCDFs) and coplanar polychlorinated biphenyls (coplanar PCBs) using skipjack tuna as bioindicator

In order to elucidate the global distribution of dioxins and related compounds, such as PCDDs, PCDFs and coplanar PCBs, levels of these compounds were determined in the muscle of skipjack tuna (Katsuwonus pelamis) collected from the offshore waters and open seas near Japan, Taiwan, Philippines, Indonesia, Seychelles and Brazil, and the Japan Sea, the East China Sea, the South China Sea, the Indian Ocean and the North Pacific Ocean. PCDDs, PCDFs and coplanar PCBs were detected in almost all the specimens collected from all the locations surveyed, indicating widespread contamination by these compounds in the marine environment. Higher concentrations of dioxins and coplanar PCBs were detected in the samples from temperate Asian regions, plausibly due to larger usage and anthropogenic generation in highly industrialized countries around the East China Sea and the South China Sea, such as Japan, Korea, Taiwan, Hong Kong and coastal China.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.     

Vertical distribution of <Emphasis Type="Italic">Todarodes pacificus</Emphasis> (Cephalopoda: Ommastrephidae) paralarvae near the Oki Islands,southwestern Sea of Japan

The diel vertical distribution patterns of Japanese common squid, Todarodes pacificus, paralarvae were examined using a Multiple Opening Closing Net and Environmental Sensing System (MOCNESS) in the southwest Sea of Japan near the Oki Islands (Japan) during five late-autumn surveys in 1998–2002. A total of 1,511 paralarvae ranging in mantle length (ML) from 0.7 to 7.3 mm were collected at 63 of the 68 stations surveyed. Most (84%) were collected above 75 m depth and in the mixed layer. The vertical distribution patterns varied little between day and night. Hatchling-sized (<1.0 mm ML) paralarvae were abundant at 0–25 m depth, and paralarval ML increased with increasing sampling depth. Our results suggest that T. pacificus paralarvae do not exhibit large diel vertical migration patterns, but as they increase in size, paralarvae gradually descend in the water column and the variability in depth increases with ontogeny.     

Congener-specific analysis of polychlorinated biphenyl in human blood from Japanese

Polychlorinated biphenyl (PCB) congeners were analyzed by high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) of whole blood samples taken from 24 healthy adult Japanese volunteers (12 males and 12 females; age range 25–46 years). On average, 95 PCB congeners were detected in whole blood samples. The mean of total PCB concentration in whole blood was 771.9 pg g^–1 whole blood (139.6 ng per g-lipid). Congener-specific analysis identified the predominant PCB congeners as #153 (22.2), #180 (11.6), #138 (8.4), #182/187 (6.6), #118 (5.6), #163/164 (5.0), #99 (3.9), #74 (3.6), #146 (3.3), #170 (3.0) and #156 (2.2), representing 75.6 of all PCBs detected in the human blood samples. Among the predominant PCB congeners, #153, #180, #138, #187 #118, #99 and #74 had chlorine as the substituent at the 2-, 4- and 5- positions of the phenyl-ring. In human blood in Japanese individuals, it is assumed that these congeners would be characteristic of the entire population, based on the relation between PCB ingestion and metabolism. Measuring 209 PCB congeners has the advantage of providing detailed information regarding the congener distribution within the blood samples, which can be compared to congener patterns in other matrices. Congener-specific analysis of 209 PCB congeners is especially useful in evaluating human exposure to PCBs.     

Using ecotoxicogenomics to evaluate the impact of chemicals on aquatic organisms

Toxicogenomics has become an important field in toxicology. Originally, toxicogenomics was intended to be used to evaluate the risks of chemicals to humans, but the recent increase in genetic information has allowed the field to be extended to other organisms. Ecotoxicogenomics is the application of toxicogenomics to organisms that are representative of ecosystems and is used to study the hazardous effects of chemicals on ecosystems as well as individuals. Although, the availability of genomic information about non-model organisms is still very limited, the application of toxicogenomics to a variety of organisms could be a powerful tool for evaluating the effects of chemicals on ecosystems. Physical and Chemical Impacts on Marine Organisms, a Bilateral Seminar Italy–Japan held in November 2004.     

Toxicity evaluation of new antifouling compounds using suspension-cultured fish cells

A simple, rapid toxicity test was developed using the suspension-cultured fish cell line CHSE-sp derived from chinook salmon Oncorhynchus tshawytscha embryos in order to assess the toxicity of new marine antifouling compounds. The compounds tested were copper pyrithione, Diuron, Irgarol 1051, KH101, Sea-Nine 211, and zinc pyrithione, all of which have been nominated in Japan as possible replacements for organotin compounds. The in vitro acute toxicity (24-h EC50) of the six compounds to these fish cells was evaluated using the dye Alamar Blue to determine cell viability, and then correlated with the results of in vivo chronic toxicities (28-day LC50) to juvenile rainbow trout Oncorhynchus mykiss. The suspension-cultured fish cells were found to be suitable for the screening of such chemicals before performing an in vivo test. The toxicities of the test compounds obtained from both tests, shown in decreasing order, were as follows: copper pyrithione > zinc pyrithione > KH101 > or = Sea-Nine 211 > Diuron > Irgarol 1051. The herbicides Diuron and Irgarol 1051 showed the least toxicity, while the pyrithiones had the greatest toxicity.