Analysis of phytochelatin complexes in the lead tolerant vetiver grass [Vetiveria zizanioides (L.)] using liquid chromatography and mass spectrometry

Ethylenediamene tetraacetic acid (EDTA) has been used to mobilize soil lead (Pb) and enhance plant uptake for phytoremediation. Chelant bound Pb is considered less toxic compared to free Pb ions and hence might induce less stress on plants. Characterization of possible Pb complexes with phytochelatins (PC_n, metal-binding peptides) and EDTA in plant tissues will enhance our understanding of Pb tolerance mechanisms. In a previous study, we showed that vetiver grass (Vetiveria zizanioides L.) can accumulate up to 19,800 and 3350 mg Pb kg⁻¹ dry weight in root and shoot tissues, respectively; in a hydroponics set-up. Following the basic incubation study, a greenhouse experiment was conducted to elucidate the efficiency of vetiver grass (with or without EDTA) in remediating Pb-contaminated soils from actual residential sites where Pb-based paints were used. The levels of total thiols, PC_n, and catalase (an antioxidant enzyme) were measured in vetiver root and shoot following chelant-assisted phytostabilization. In the presence of 15 mM kg ⁻¹ EDTA, vetiver accumulated 4460 and 480 mg Pb kg⁻¹ dry root and shoot tissue, respectively; that are 15- and 24-fold higher compared to those in untreated controls. Despite higher Pb concentrations in the plant tissues, the amount of total thiols and catalase activity in EDTA treated vetiver tissues was comparable to chelant unamended controls, indicating lowered Pb toxicity by chelation with EDTA. The identification of glutathione (referred as PC₁) (m/z 308.2), along with chelated complexes like Pb-EDTA (m/z 498.8) and PC₁-Pb-EDTA (m/z 805.3) in vetiver root tissue using electrospray tandem mass spectrometry (ES-MS) highlights the possible role of such species towards Pb tolerance in vetiver grass.     

Ultraviolet absorbance as a proxy for total dissolved mercury in streams

Stream water samples were collected over a range of hydrologic and seasonal conditions at three forested watersheds in the northeastern USA. Samples were analyzed for dissolved total mercury (THg_d), DOC concentration and DOC composition, and UV₂₅₄ absorbance across the three sites over different seasons and flow conditions. Pooling data from all sites, we found a strong positive correlation of THg_d to DOC (r² = 0.87), but progressively stronger correlations of THg_d with the hydrophobic acid fraction (HPOA) of DOC (r² = 0.91) and with UV₂₅₄ absorbance (r² = 0.92). The strength of the UV₂₅₄ absorbance-THg_d relationship suggests that optical properties associated with dissolved organic matter may be excellent proxies for THg_d concentration in these streams. Ease of sample collection and analysis, the potential application of in-situ optical sensors, and the possibility for intensive monitoring over the hydrograph make this an effective, inexpensive approach to estimate THg_d flux in drainage waters.     

Use of a food web model to evaluate the factors responsible for high PCB fish concentrations in Lake Ellasjøen, a high Arctic Lake

Background, aim, and scope

Lake Ellasjøen, located in the Norwegian high arctic, contains the highest concentrations of polychlorinated biphenyls (PCBs) ever recorded in fish and sediment from high arctic lakes, and concentrations are more than 10 times greater than in nearby Lake Øyangen. These elevated concentrations in Ellasjøen have been previously attributed, in part, to contaminant loadings from seabirds that use Ellasjøen, but not Øyangen, as a resting area. However, other factors, such as food web structure, organism growth rate, weight, lipid content, lake morphology, and nutrient inputs from the seabird guano, also differ between the two systems. The aim of this study is to evaluate the relative influence of these factors as explanatory variables for the higher PCB fish concentrations in Ellasjøen compared with Øyangen, using both a food web model and empirical data.

Methods

The model is based on previously developed models but parameterized for Lakes Ellasjøen and Øyangen using measured data wherever possible. The model was applied to five representative PCB congeners (PCB 105, 118, 138, 153, and 180) using measured sediment and water concentrations as input data and evaluated with previously collected food web data.

Results

Modeled concentrations are within a factor of two of measured concentrations in 60% and 40% of the cases in Lakes Ellasjøen and Øyangen, respectively, and within a factor of 10 in 100% of the cases in both lakes. In many cases, this is comparable to the variability associated with the data as well as the efficacy of the predictions of other food web model applications.

Discussion

We next used the model to quantify the relative importance of five major differences between Ellasjøen and Øyangen by replacing variables representing each of these factors in the Ellasjøen model with those from Øyangen, in separate simulations. The model predicts that the elevated PCB concentrations in Ellasjøen water and sediment account for 49%–58% of differences in modeled fish PCB concentrations between lakes. These elevated sediment and, to a lesser extent, water concentrations in Ellasjøen are due to PCB loadings from seabird guano. However, sediment–water fugacity ratios of PCBs are consistently greater in Ellasjøen compared with Øyangen, which suggests that internal lake processes also contribute to differences in sediment and water concentrations. We hypothesize that the nutrients associated with guano influence sediment–water fugacity ratios of PCBs by increasing the stock of pelagic algae. As both these algae and the guano settle, their organic carbon content is degraded faster than PCBs, which causes an extra magnification step in Ellasjøen before these detrital particles are consumed by benthic organisms, which are in turn consumed by fish. The model predicts that the remaining ～50% of the differences in PCB concentrations observed between the fish of these lakes are due to other subtle differences in their food web structures.

Conclusions

In conclusion, based on the results of a food web model, we found that the most dominant factors influencing the higher PCB fish concentrations in Lake Ellasjøen compared with Øyangen are the higher sediment and water concentrations in Ellasjøen, caused by seabird guano. Together, sediment and water are predicted to account for 49%–58% of differences in fish concentrations between lakes. Although seabird guano provides a source of nutrients to the lake, in addition to contaminants, empirical data and indirect model results suggest that nutrients are not leading to decreased bioaccumulation, in contrast to what has been observed in temperate, pelagic food webs.

Recommendations and perspectives

The results of this study emphasize the importance of considering even small differences in food web structure when comparing bioaccumulation in two lakes; although the food web structures of Ellasjøen and Øyangen differ only slightly, the model predicts that these differences account for most of the remaining ～50% of the differences in PCB fish concentrations between the two lakes. This study further demonstrates the utility of food web models as we were able to predict and tease apart the influence of various factors responsible for the elevated concentrations in the fish from Lake Ellasjøen, which would have been difficult using the field data alone.     

Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

Temporal concentration changes of DEET,TCEP, terbutryn,and nonylphenols in freshwater streams of Hesse,Germany: possible influence of mandatory regulations and voluntary environmental agreements

Background, aim, and scope  

The present study focuses on the temporal concentration changes of four common organic pollutants in small freshwater streams of Hesse, Germany. The substances (tris(2-chloroethyl)phosphate (TCEP), the technical isomer mixture of 4-nonylphenol (NP), 2-(t-butylamino)-4-(ethylamino)-6-(methylthio)-s-triazine (terbutryn), and N,N-diethyl-m-toluamide (DEET)) are subject to differing regulations. Whereas the use of NP and the related nonylphenolethoxylates (NPEOs) are almost completely banned under EU directive 2003/53/EC, the herbicide terbutryn is only restricted for use as a herbicide in the majority of member states of the European Union (EU). In contrast, TCEP and DEET are not regulated by legislation, but have been replaced in some products through consumer pressure. The impact of regulation on the environmental concentrations of these pollutants is discussed.     

Surface ozone background in the United States: Canadian and Mexican pollution influences

We use a global chemical transport model (GEOS-Chem) with 1° × 1° horizontal resolution to quantify the effects of anthropogenic emissions from Canada, Mexico, and outside North America on daily maximum 8-hour average ozone concentrations in US surface air. Simulations for summer 2001 indicate mean North American and US background concentrations of 26 ± 8 ppb and 30 ± 8 ppb, as obtained by eliminating anthropogenic emissions in North America vs. in the US only. The US background never exceeds 60 ppb in the model. The Canadian and Mexican pollution enhancement averages 3 ± 4 ppb in the US in summer but can be occasionally much higher in downwind regions of the northeast and southwest, peaking at 33 ppb in upstate New York (on a day with 75 ppb total ozone) and 18 ppb in southern California (on a day with 68 ppb total ozone). The model is successful in reproducing the observed variability of ozone in these regions, including the occurrence and magnitude of high-ozone episodes influenced by transboundary pollution. We find that exceedances of the 75 ppb US air quality standard in eastern Michigan, western New York, New Jersey, and southern California are often associated with Canadian and Mexican pollution enhancements in excess of 10 ppb. Sensitivity simulations with 2020 emission projections suggest that Canadian pollution influence in the Northeast US will become comparable in magnitude to that from domestic power plants.     

Ultrafine particles near a major roadway in Raleigh,North Carolina: Downwind attenuation and correlation with traffic-related pollutants

Ultrafine particles (UFPs, diameter < 100 nm) and co-emitted pollutants from traffic are a potential health threat to nearby populations. During summertime in Raleigh, North Carolina, UFPs were simultaneously measured upwind and downwind of a major roadway using a spatial matrix of five portable industrial hygiene samplers (measuring total counts of 20–1000 nm particles). While the upper sampling range of the portable samplers extends past the defined “ultrafine” upper limit (100 nm), the 20–1000 nm number counts had high correlation (Pearson R = 0.7–0.9) with UFPs (10–70 nm) measured by a co-located research-grade analyzer and thus appear to be driven by the ultrafine range. Highest UFP concentrations were observed during weekday morning work commutes, with levels at 20 m downwind from the road nearly fivefold higher than at an upwind station. A strong downwind spatial gradient was observed, linearly approximated over the first 100 m as an 8% drop in UFP counts per 10 m distance. This result agreed well with UFP spatial gradients estimated from past studies (ranging 5–12% drop per 10 m). Linear regression of other vehicle-related air pollutants measured in near real-time (10-min averages) against UFPs yielded moderate to high correlation with benzene (R² = 0.76), toluene (R² = 0.49), carbon monoxide (R² = 0.74), nitric oxide (R² = 0.80), and black carbon (R² = 0.65). Overall, these results support the notion that near-road levels of UFPs are heavily influenced by traffic emissions and correlate with other vehicle-produced pollutants, including certain air toxics.     

Tethered balloon-based soundings of ozone,aerosols, and solar radiation near Mexico City during MIRAGE-MEX

A tethered balloon sampling system was used to measure vertical profiles of ozone, particles, and solar radiation in the atmospheric boundary layer on the northern edge of Mexico City, in March 2006 as part of the Megacity Impact on Regional and Global Environment-Mexico experiment. Several commercial sensors, designed for surface applications, were deployed on a tethered balloon platform.Profiles indicate that for these 3 scalars the boundary layer (surface up to 700 m) was well mixed in the period 10:00–16:00 LST. Good agreement was observed for median surface and balloon ozone and particle number concentrations. For most profiles, the surface deposition of ozone was not significant compared to median profile concentrations. Particle number concentration (0.3, 0.5, 1.0 and 5.0 μm) also showed little variation with attitude. Radiatprofiles showed a monotonic increase in diffuse radiation from the maximum altitude of profiles to the surface. Consequently, it was inferred that surface measurements of these likely were representative of lower boundary layer values during this time period.     

Evaluation and application of biomagnetic monitoring of traffic-derived particulate pollution

Inhalation of particulate pollutants below 10 μm in size (PM₁₀) is associated with adverse health effects. Here we use magnetic remanence measurements of roadside tree leaves to examine levels of vehicle-derived PM around Lancaster, UK. Leaf saturation remanence (SIRM) values exhibit strong correlation with both the SIRM and particulate mass of co-located, pumped-air samples, indicating that these leaf magnetic values are an effective proxy for ambient PM₁₀ concentrations. Biomagnetic monitoring using tree leaves can thus provide high spatial resolution data sets for assessment of particulate pollution levels at pedestrian-relevant heights. Leaf SIRM values not only increase with proximity to roads with higher traffic volumes, but are also ～100% higher at 0.3 m than at ～1.5–2 m height. Magnetic and SEM data indicate that the particle populations are dominated by spherical, iron-rich particles ～0.1–1 μm in diameter, with fewer larger, more angular, silica-rich particles. Comparison of the roadside leaf-calculated PM₁₀ concentrations with PM₁₀ concentrations predicted by a widely-used atmospheric dispersion model indicates some agreement between them. However, the model under-predicts PM₁₀ concentrations at ‘urban hotspots’ such as major–minor road junctions and traffic lights. Conversely, the model over-predicts PM₁₀ concentrations with distance from the road wherever one tree is screened by another, indicating the filtering/protective effect of roadside trees in leaf.