Beaver-mediated methane emission: The effects of population growth in Eurasia and the Americas

Globally, greenhouse gas budgets are dominated by natural sources, and aquatic ecosystems are a prominent source of methane (CH₄) to the atmosphere. Beaver (Castor canadensis and Castor fiber) populations have experienced human-driven change, and CH₄ emissions associated with their habitat remain uncertain. This study reports the effect of near extinction and recovery of beavers globally on aquatic CH₄ emissions and habitat. Resurgence of native beaver populations and their introduction in other regions accounts for emission of 0.18–0.80 Tg CH₄ year⁻¹ (year 2000). This flux is approximately 200 times larger than emissions from the same systems (ponds and flowing waters that became ponds) circa 1900. Beaver population recovery was estimated to have led to the creation of 9500–42 000 km² of ponded water, and increased riparian interface length of >200 000 km. Continued range expansion and population growth in South America and Europe could further increase CH₄ emissions.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0575-y) contains supplementary material, which is available to authorized users.     

Geogenic Distribution of Arsenic (As) and Antimony (Sb) in Soils of the Murcia Region in Spain

The objective of this study was to determine the As and Sb contents in soils from the Murcia Region of Spain and the possible relationship between the mineralogical composition, soil properties, and As and Sb concentrations. In this study, 490 samples were selected from areas with different characteristics in order to study As and Sb variability. Results show that As and Sb concentrations are positively correlated with the phyllosilicate and quartz content but negatively correlated with the calcite content. The generic reference level (GRL) for these elements was determined according to the Spanish legislation. Established GRL values vary according to the established mineralogical groups, suggesting that GRL has to be determined considering the lithological characteristics of the study area.     

Neurotoxicity and transcriptome changes in embryonic zebrafish induced by halobenzoquinone exposure

Halobenzoquinones(HBQs) are emerging disinfection byproducts(DBPs) with a widespread presence in drinking water that exhibit much higher cytotoxicity than regulated DBPs. However, the developmental neurotoxicity of HBQs has not been studied in vivo. In this work, we studied the neurotoxicity of HBQs on zebrafish embryos, after exposure to varying concentrations(0-8 μmol/L) of three HBQs, 2,5-dichloro-1,4-benzoquinone(2,5-DCBQ), 2,6-dichloro-1,4-benzoquinone(2,6-DCBQ), and 2,5-dibromo-1,4-benzoqu...     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

Analysis of emergency situations at municipal solid waste landfills

Journal of Material Cycles and Waste Management - This work focuses on the issue of emergency prevention in the operation of municipal solid waste landfills. In this work, an emergency is...     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

Effect of temperature and organic nutrients on the biodegradation of linear alkylbenzene sulfonate (LAS) during the composting of anaerobically digested sludge from a wastewater treatment plant

Limits on the application of biosolids (anaerobically processed sludges from wastewater treatment plants) as fertilizers for the amendment of soil are becoming greater because of the accumulation of recalcitrant substances, making necessary the use of techniques that bring the concentration of xenobiotics to lower concentrations than those permitted. In general, the biosolids composting process is sufficient to reduce the usual concentration of linear alkylbenzene sulfonates (LAS) to low levels. In this work, an assessment is made on the effect of temperature in the capacity of enriched bacterial populations to biodegrade LAS, together with the influence that the available nutrients may have in the biodegradation of these compounds. The results show that the microbial metabolism of LAS was not observed in the thermophilic range. The optimum temperature for the biodegradation of LAS appears to be around 40 degrees C, this is, the lowest assayed here, and at this temperature the differences in the biodegradation of LAS among the nutritionally supplemented cultures are small.     

A kinetic analysis of solid waste composting at optimal conditions

Six municipal solid waste (MSW) and yard waste components (food waste, mixed paper, yard waste, leaves, branches, grass clippings) were aerobically decomposed to measure the extent of decomposition under near optimal conditions. Decomposition was characterized by at least two principal stages, for most components, as was indicated by the carbon dioxide production rates. An aerobic biodegradation conceptual model is presented here based on the principle that solids hydrolysis is the rate-limiting step during solid waste composting. The mineralizable solid carbon of each solid waste component was assumed to comprise the readily, the moderately and the slowly (or refractory) hydrolysable carbons, each hydrolyzing at different rates to aqueous (water soluble) carbon. Aqueous carbon mineralizes to CO2 at rapid rates that are not rate-limiting to the process. Solids hydrolysis rate constants were calculated after fitting the experimentally determined carbon dioxide production rate data to model results. Hydrolysis rates for the readily hydrolysable carbon in all components ranged from approximately 0.06 to 0.1 d(-1); hydrolysis rates for the moderately hydrolysable carbon ranged from 0.005 to 0.06 d(-1). Leaves, branches and grass clippings did not have a readily hydrolysable carbon fraction, whilst the leaves and branches had the largest slowly hydrolysable carbon fractions (70%, 82%, respectively, of the total solid organic carbon). Grass and yard waste did not contain slowly hydrolysable carbon fractions. Food waste had the largest readily hydrolysable carbon fraction and produced the highest amount of CO2 among all substrates. Moderately hydrolysable solid carbon fractions ranged from 16% to 90% of the total solid organic carbon for all substrates used.