Differences in the effects of simulated sea aerosol on water relations, salt content, and leaf ultrastructure of rock-rose plants

White-leaf rock-rose (Cistus albidus L.) and Montpellier rock-rose (C. monspeliensis L.) plants were sprayed 2 to 3 min per day over a 7-d period, in an unheated plastic greenhouse, with different aqueous solutions containing deionized water alone (control); an anionic surfactant (sodium dodecylbenzenesulfonate 82.5%, 50 mg L(-1)) (S1); a solution simulating the composition of sea aerosol (S2); and a solution simulating sea aerosol with anionic surfactant (S3). White-leaf rock-rose was more sensitive to sea aerosol, showing greater leaf damage and markedly decreased growth, and the presence of surfactant enhanced the phytotoxic effect leading to greater increases in mortality. Montpellier rock-rose did not appear to be more adversely affected when surfactant was used in combination with sea aerosol, and manifested slight or less severe symptoms than white-leaf rock-rose. There was a significant increase in leaf turgor potential in the plants treated with both sea aerosol treatments by osmotic adjustment effect. The decrease in photosynthesis level seems to be due to both stomatal and nonstomatal factors. The results of microscopical analysis of Montpellier rock-rose plants show that sea aerosol treatment caused alterations in the chloroplast structure, reducing the starch grain and swelling the thylakoid membranes. The results of this study indicated that Montpellier rock-rose was more tolerant to sea aerosol than white-leaf rock-rose, showing a lower reduction in plant growth and less leaf damage, probably because of its ability to compartmentalize the toxic ions at the intracellular level.     

Sorption of sulfonamide pharmaceutical antibiotics on whole soils and particle-size fractions

Residues of pharmaceutical antibiotics are found in the environment, whose fate and effects are governed by sorption. Thus, the extent and mechanisms of the soil sorption of p-aminobenzoic acid and five sulfonamide antibiotics (sulfanilamide, sulfadimidine, sulfadiazine, sulfadimethoxine, and sulfapyridine) were investigated using topsoils of fertilized and unfertilized Chernozem and their organic-mineral particle-size fractions. Freundlich adsorption coefficients (K(f)) ranged from 0.5 to 6.5. Adsorption increased with aromaticity and electronegativity of functional groups attached to the sulfonyl-phenylamine core. Adsorption to soil and particle-size fractions increased in the sequence: coarse silt < whole soil < medium silt < sand < clay < fine silt and was influenced by pH. Sorption nonlinearity (1/n 相似文献   

Multicriteria evaluation of simulated logging scenarios in a tropical rain forest

Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.     

Acute toxicity and genotoxicity of two novel pesticides on amphibian, Rana N. Hallowell

Imidacloprid [1-(6-chloro-3-pyridylmethyl)-N-nitro-imidazolidin-2-ylideneamine] and RH-5849 [2'-benzoyl-l'-tert-butylbenzoylhydrazinel] are two pesticides used in China since 1992. In the present study we conducted acute toxicity test, micronucleus (MN) test and comet assay of the two pesticides on amphibian, Rana N. Hallowell, a sensitive organism suitable for acting as the bio-indicator of aquatic and agricultural ecosystems. The values of LC50-48 h of imidacloprid were found to be 165 mg l(-1) for tadpoles of Rana limnocharis and 219 mg l(-1) for tadpoles of Rana N. Hallowell. On the other hand, RH-5849 showed no acute toxicity to tadpoles during the 96 h exposure even it was saturated in the test solutions. There were significant differences in the MN frequencies between the negative controls and the treated groups at the dose of 8 mg l(-1) for imidacloprid (p < 0.05) and 40 mg l(-1) for RH-5849 (p < 0.01). Comet assay found significant differences (p < 0.01) in the distributions of DNA damage grades between the negative controls and groups treated in vitro with 0.05, 0.1, 0.2 and 0.5 mg l(-1) of imidacloprid and 5, 25, 50 and 100 mg l(-1) of RH-5849, respectively. DNA damage scores increased with the exposure levels of the two pesticides and dose-effect relationships were observed for both imidacloprid (r2 = 0.92) and RH-5849 (r2 = 0.98). The MN test and comet assay revealed potential adverse effects of the two pesticides on DNA in the erythrocytes of amphibians in aquatic and agricultural ecosystems.     

Preliminary ecotoxicological characterization of a new energetic substance, CL-20

A new energetic substance hexanitrohexaazaisowurtzitane (or CL-20) was tested for its toxicities to various ecological receptors. CL-20 (epsilon-polymorph) was amended to soil or deionized water to construct concentration gradients. Results of Microtox (15-min contact) and 96-h algae growth inhibition tests indicate that CL-20 showed no adverse effects on the bioluminescence of marine bacteria Vibrio fischeri and the cell density of freshwater green algae Selenastrum capricornutum respectively, up to its water solubility (ca. 3.6 mg l(-1)). CL-20 and its possible biotransformation products did not inhibit seed germination and early seedling (16-19 d) growth of alfalfa (Medicago sativa) and perennial ryegrass (Lolium perenne) up to 10,000 mg kg(-1) in a Sassafras sandy loam soil (SSL). Indigenous soil microorganisms in SSL and a garden soil were exposed to CL-20 for one or two weeks before dehydrogenase activity (DHA) or potential nitrification activity (PNA) were assayed. Results indicate that up to 10,000 mg kg(-1) soil of CL-20 had no statistically significant effects on microbial communities measured as DHA or on the ammonium oxidizing bacteria determined as PNA in both soils. Data indicates that CL-20 was not acutely toxic to the species or microbial communities tested and that further studies are required to address the potential long-term environmental impact of CL-20 and its possible degradation products.     

Characterisation of a reference site for quantifying uncertainties related to soil sampling

The paper reports a methodology adopted to face problems related to quality assurance in soil sampling. The SOILSAMP project, funded by the Environmental Protection Agency of Italy (APAT), is aimed at (i) establishing protocols for soil sampling in different environments; (ii) assessing uncertainties associated with different soil sampling methods in order to select the "fit-for-purpose" method; (iii) qualifying, in term of trace elements spatial variability, a reference site for national and international inter-comparison exercises. Preliminary results and considerations are illustrated.     

Exposure to methylhexahydrophthalic anhydride (MHHPA) in two workplaces of the electric industry

Methylhexahydrophthalic anhydride (MHHPA) is a hardener for hot-cured epoxy resins employed as insulators in the electric industry. MHHPA has only been measured as an ingredient with other alicyclic anhydrides, albeit there are also large processes which use only MHHPA. We collected MHHPA vapour in a set of devices: Teflon filter, glass spiral, TenaxTA tube connected consecutively together. Elution was performed with a solvent mixture of methyl-tert-butyl ether (70%), acetonitrile (30%), and acetic anhydride (0.5%). By capillary GC-ECD, the regression was linear (0.9994) in the practical low concentration range of 0.04-1 microg ml(-1) being equal to 0.001-0.035 mg m(-3) in 30 l of air. The exposure was measured in two factories manufacturing electric appliances. The assembled objects were first impregnated with a liquid epoxy/hardener mixture, and then the resin hardened at elevated temperature. In condenser manufacturing, the operators' 8 h exposure ranged from 0.068 to 0.118 mg m(-3), and the short-term exposure was during operation at ovens mean 1.90 mg m(-3). The impregnation of coiled resistors and transfer of them to ovens caused the worst exposures, short-term mean 3.846 mg m(-3) and long-term mean 2.191 mg m(-3). During the 'baking', the ovens were closed and evacuated, but when the hot objects were moved out of the ovens, they continued during chilling to emit MHHPA, mean 0.366 mg m(-3). In the adjacent areas, assembling, control rooms, offices, the exposure was still significant, 0.017-0.043 mg m(3), due to leaks from the high exposure areas. Mechanical general ventilation and local exhausts were functioning. Respirators were available for short supervising of the hot equipment.     

Assessment of contamination by heavy metals and petroleum hydrocarbons in sediments of Montevideo Harbour (Uruguay)

As part of the first environmental assessment within Montevideo Harbour, in summer and winter of 1998, sediments samples were collected at eight locations to determine the spatial distribution of anthropogenic pollutants. Muddy sediments with high organic matter content dominate the study area. Heavy metal levels indicated that sediments were highly polluted with Zn (overall mean: 312+/-102 microg g(-1) dry sediment), Pb (85+/-31), Cu (89+/-25), Cr (162+/-62), and Hg (0.63+/-0.3) and moderately with Ni (30+/-2) and Ag (1.2+/-0.4). Depending on location and season, aliphatic hydrocarbons reached from 21 to 120 microg g(-1), while the unresolved complex mixture represented up to 76% of the total aliphatic fraction. Total PAH concentrations ranged from 1.56 to 90.44 microg g(-1); except at one location, petroleum derivatives were identified as main local source. The results pointed out that almost all the harbour area presented some substances that can cause adverse biological effects, especially in the inner region where all metals are above PEL levels. Principal components analysis confirmed that the inner harbour region is most severely affected by the pollutants and it was possible to differentiate three regions according to their environmental quality.