Assessment of space utilisation in a subtidal temperate bryozoan community

On subtidal hard substrata, Bryozoa are often very abundant, both in terms of numbers of colonies and numbers of species. To investigate how so many species are able to co-exist, often in close proximity to each other, subtidal material was dredged from an area of bryozoan-rich coarse shelly sea-bed off the south-west of the Isle of Man (British Isles) in autumn 1984 and 1985. A survey was performed on the distribution of colonies of eight common, encrusting cheilostome bryozoan species across the surfaces of four types of empty, disarticulated bivalve shells. Each species was found to be significantly commoner on certain substratum types such as rough surfaces or inner concave surfaces. Fenestrulina malusii (Audouin) showed a further, more specific, tendency to be signficantly more abundant on the grooves of the corrugated inner surfaces of left valves of Pecten maximus (L.). In general however there was much overlap in distribution and it is proposed that such large numbers of species are able to co-exist because of the evolution of different life-history strategies ensuring that each species uses the available temporally and spatially heterogenous substrata in subtly different ways; some species, for example, occupying substrata that are optimal to bryozoan growth and other species, by reaching maturity earlier, being able to inhabit more ephemeral suboptimal substrata.     

Alcohol ignition interlock programs

The alcohol ignition interlock is an in-vehicle DWI control device that prevents a car from starting until the operator provides a breath alcohol concentration (BAC) test below a set level, usually .02% (20 mg/dl) to .04% (40 mg/dl). The first interlock program was begun as a pilot test in California 18 years ago; today all but a few US states, and Canadian provinces have interlock enabling legislation. Sweden has recently implemented a nationwide interlock program. Other nations of the European Union and as well as several Australian states are testing it on a small scale or through pilot research. This article describes the interlock device and reviews the development and current status of interlock programs including their public safety benefit and the public practice impediments to more widespread adoption of these DWI control devices. Included in this review are (1) a discussion of the technological breakthroughs and certification standards that gave rise to the design features of equipment that is in widespread use today; (2) a commentary on the growing level of adoption of interlocks by governments despite the judicial and legislative practices that prevent more widespread use of them; (3) a brief overview of the extant literature documenting a high degree of interlock efficacy while installed, and the rapid loss of their preventative effect on repeat DWI once they are removed from the vehicles; (4) a discussion of the representativeness of subjects in the current research studies; (5) a discussion of research innovations, including motivational intervention efforts that may extend the controlling effect of the interlock, and data mining research that has uncovered ways to use the stored interlock data record of BAC tests in order to predict high risk drivers; and (6) a discussion of communication barriers and conceptual rigidities that may be preventing the alcohol ignition interlock from taking a more prominent role in the arsenal of tools used to control DWI. Whether interlock programs can help public policymakers achieve their expressed goals of substantially reducing the level of impaired driving will remain uncertain until procedural barriers and intransigent judiciary practices can be overcome that provide for more systematic routine use of interlock programs. Despite strong effectiveness evidence in all studies to date, the real potential of this technology to reduce the road toll cannot be estimated until they are more widely adopted.     

Long-term behavior of passively aerated compost methanotrophic biofilter columns

The methane oxidation potential of several types of compost methanotrophic biofilter columns were compared in the laboratory over a period of 220 days. The results indicate an increase in methanotrophic activity over a period of about 100 days, up to a maximum of 400 g m(-2) day(-1), and a gradual decline to about 100 g m(-2) day(-1) within the next 120 days. High methane oxidation rates appear to be restricted to a small area of the column, 10-15 cm thick. Based on the laboratory investigations carried out to determine the cause for the decline in methane oxidation rate, it was concluded that the formation of exopolymeric substances (EPS), at the zones of maximum methane oxidation, was responsible for this decline. In monitoring methane oxidation in a column for up to 600 days, it was observed that mixing of the medium after formation of EPS enabled the column to temporarily recover high performance. The results suggest that stable, homogenous compost, with a low C/N and low ammonium content, mixed on a regular basis, could achieve and maintain high methane oxidation efficiencies.     

Field trial of a new aeration system for enhancing biodegradation in a biopile

The influence of a new aeration system on the biopile performance was investigated. The purpose was to increase biodegradation efficiency by optimising airflow through the pile. During a 1-month field trial, the performance of a new system using two perforated vertical pipes with wind-driven turbines was compared with that of a standard pile configuration with two horizontal perforated pipes. Both piles were composed of a similar mix of diesel-contaminated soils, woodchips, compost and NPK fertiliser. Hydrocarbons were recovered using solvent extraction, and determined both gravimetrically and by gas chromatography. Total heterotrophs, pH and moisture content were also assessed. Air pressure measurements were made to compare the efficiency of suction in the pipes. Results at the end of the experiment showed that there was no significant difference between the two piles in the total amount of hydrocarbon biodegradation. The normalised degradation rate was, however, considerably higher in the new system than in the standard one, suggesting that the vertical venting method may have improved the efficiency of the biological reactions in the pile. The pressure measurements showed a significant improvement in the suction produced by the new aeration system. However, many factors other than the airflow (oxygen supply) may influence and limit the biodegradation rates, including moisture content, age of contaminants and the climatic conditions. Additional experiments and modelling need to be carried out to explore further the new aeration method and to develop criteria and guidelines for engineering design of optimal aeration schemes in order to achieve maximum biodegradation in biopiles.     

Leaching assessment of road materials containing primary lead and zinc slags

Characterisation of the leaching behaviour of waste-containing materials is a crucial step in the environmental assessment for reuse scenarios. In our research we applied the multi-step European methodology ENV 12-920 to the leaching assessment of road materials containing metallurgical slag. A Zn slag from an imperial smelting furnace (ISF) and a Pb slag from a lead blast furnace (LBF) are investigated. The two slags contain up to 11.2 wt% of lead and 3.5 wt% of zinc and were introduced as a partial substitute for sand in two road materials, namely sand-cement and sand-bitumen. At the laboratory scale, a leaching assessment was performed first through batch equilibrium leaching tests. Second, the release rate of the contaminants was evaluated using saturated leaching tests on monolithic material. Third, laboratory tests were conducted on monolithic samples under intermittent wetting conditions. Pilot-scale tests were conducted for field testing of intermittent wetting conditions. The results show that the release of Pb and Zn from the materials in a saturated scenario was controlled by the pH of the leachates. For the intermittent wetting conditions, an additional factor, blocking of the pores by precipitation during the drying phase is proposed. Pilot-scale leaching behaviour only partially matched with the laboratory-scale test results: new mass transfer mechanisms and adapted laboratory leaching tests are discussed.     

Sorption of sulfonamide pharmaceutical antibiotics on whole soils and particle-size fractions

Residues of pharmaceutical antibiotics are found in the environment, whose fate and effects are governed by sorption. Thus, the extent and mechanisms of the soil sorption of p-aminobenzoic acid and five sulfonamide antibiotics (sulfanilamide, sulfadimidine, sulfadiazine, sulfadimethoxine, and sulfapyridine) were investigated using topsoils of fertilized and unfertilized Chernozem and their organic-mineral particle-size fractions. Freundlich adsorption coefficients (K(f)) ranged from 0.5 to 6.5. Adsorption increased with aromaticity and electronegativity of functional groups attached to the sulfonyl-phenylamine core. Adsorption to soil and particle-size fractions increased in the sequence: coarse silt < whole soil < medium silt < sand < clay < fine silt and was influenced by pH. Sorption nonlinearity (1/n 相似文献   

Application of a slow-release fertilizer for oil bioremediation in beach sediment

A 105-d field experiment was conducted to determine the potential of the slow-release fertilizer, Osmocote (Scotts, Marysville, OH), to stimulate the indigenous microbial biodegradation of petroleum hydrocarbons in an oil-spiked beach sediment on an intertidal foreshore in Singapore. Triplicate microcosms containing 80 kg of weathered sediment, spiked with 5% (w/w) Arabian light crude oil and 1.2% (w/w) Osmocote pellets, were established, together with control microcosms minus Osmocote. Relative to the control, the presence of the Osmocote sustained a significantly higher level of nutrients (NH(4)(+)-N, NO(3)(-)-N, and PO(4)(3-)-P) in the sediment pore water over the duration of the experiment. The metabolic activity of the indigenous microbial biomass, as measured using an intracellular dehydrogenase enzyme assay, was also significantly enhanced over the duration of the experiment in amended sediments. The loss of total recoverable petroleum hydrocarbons (TRPH) and biodegradation of total n-alkanes (C(10)-C(33)), branched alkanes (pristane and phytane), as well as total target polycyclic aromatic hydrocarbons (PAHs) (two- to six-ring), in both the control and Osmocote-amended sediments, followed a first-order biodegradation model. The first-order loss rate of total recoverable petroleum hydrocarbons was 2.57 times greater than that of the control. The hopane-normalized rate constants for total n-alkane, branched alkane, and total target PAH biodegradation in the Osmocote-treated sediments were 3.95-, 5.50-, and 2.45-fold higher than the control, respectively. Overall, the presence of Osmocote was able to significantly enhance and accelerate the biodegradation of aliphatics and PAHs in oil-contaminated sediments under natural field conditions in an intertidal foreshore environment.     

Rotational application of bioinsecticide with deltamethrin-An antilarval measure for the control of filarial vector, Culex quinquefasciatus (Culicidae: Diptera)

A laboratory investigation was undertaken to study the cyclic usage of field recommended doses of Bacillus thuringiensis israelensis (Bti), Bacillus sphaericus (Bsp) and combination of Bti and Bsp (half the recommended dose of each) with deltamethrin 2.8 EC to attain better control of mosquito larvae. To understand the susceptibility status of the Culex quinquefasciatus larvae in the field, early fourth instar field collected larvae were exposed to the above treatments of biopesticides and were monitored for their persistency till 50% mortality was obtained. The larvae those survived in each treatment were transferred to the concentration of deltamethrin that gave 50% mortality. Observations on larval mortality after the treatment with deltamethrin were recorded after 24 h. The results revealed that Bti excels Bsp, as it recorded 54% mortality only on 17th day after application. The other salient finding of this study is LC50 of deltamethrin is sufficient to follow the biopesticides application for an effective control of Culex larvae.