Combined effects of mercury and hexachlorobenzene in the rat

Abstract

The objective of the present study was to assess the potential interactive effects of two Great Lakes chemical contaminants, hexachlorobenzene (HCB) and mercury (HgCl₂). Groups of 10 female Sprague‐Dawley rats were administered by gavage single doses of HCB (400, 600 mg/kg b.w. in corn oil), HgCl₂ (10.0, 12.5 mg/kg b.w. aqueous) or combinations of both followed by observation for clinical signs of toxicity for 14 days. Five animals from treatment groups died before the termination of the study; one animal each in 600 mg HCB, 400 mg HCB + 10 mg HgCl₂, and 600 mg HCB + 10 mg HgCl₂, and two animals in 600 mg HCB + 12.5 mg HgCl₂. The surviving animals were necropsied at the termination of the study, and hematological, clinical chemistry, histopathological and tissue residue analyses were performed. Relative liver weights were increased in both low and high dose groups of HCB but not in animals treated with HgCl₂ alone. Co‐administration of HgCl₂ did not alter the HCB effects on the liver weight of the animals. Serum cholesterol levels were increased in all the groups receiving HCB but not HgCl₂. No interactive effects on other serum parameters were seen in animals administered with both chemicals. Mild to moderate morphological changes occurred in the liver, thyroid, thymus, ovary and bone marrow of rats exposed to HCB or HCB + HgCl₂, and in the kidney of HgCl₂ or HgCl₂ + HCB treated animals. More severe histological changes occurred in the groups receiving both chemicals. The histological effects appeared to be additive. It was concluded that co‐administration with HCB and HgCl₂ resulted in additive effects in some of the endpoints measured but no synergism or antagonism was observed.     

The copper level dependence in vegetable crops at pesticide treatment

Abstract

Pesticides containing copper are used on wide range in vegetable production, especially in the open field. Copper has an excellent fungicidal effect against diseases of tomato, pepper, onion and in practical use it is essential as bactericide in the above mentioned crops.

The fungicides containing copper are freely available on the market, they are not expensive and widely used without any special knowledge. They are popular in simple home gardens as well as in hi‐tech vegetable production and are used even in all forms of “bio”; culture.

From the other side, copper can be toxic. The allowable level is 10 mg Cu/kg product. This concentration may be found after the first treatment and it increases after every further application.

In our experiments the copper absorbancy and accumulation has been investigated at different pesticide doses and under different experimental conditions.

The analytical measurements, the sample preparation, the instrument calibration have been made by the Inductively Coupled Plasma Spectrometer at the Department of Chemistry of the University of Horticulture and Food Industry.     

An Analysis of Biomedical Waste Incineration

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.     

Hydrocarbon Measurements During the 1992 Southern Oxidants Study Atlanta Intensive: Protocol and Quality Assurance

Abstract

A major component of the Southern Oxidants Study (SOS) 1992 Atlanta Intensive was the measurement of atmospheric nonmethane hydrocarbons. Ambient air samples were collected and analyzed by a network of strategically located automated gas chromatography (GC) systems (field systems). In addition, an extensive canister sampling network was deployed. Combined, more than 3000 chromatograms were recorded. The SOS science team targeted for quantitative analysis 56 compounds which may be substantial contributors to ozone formation or used as air mass tracers. A quality assurance program was instituted to ensure that good measurements were being made throughout the network for each target compound. Common, high-quality standards were used throughout the network. The performance of individual field systems was evaluated during the intensive through the analysis of challenge mixtures. This methodology helped to identify and correct analytical problems as they arose.     

Feasibility of Applying a Stable Isotopic Tracer for Direct Determination of Dry Particulate Deposition to Soybean Plants

ABSTRACT

A stable rare-earth isotopic tracer was used to measure the deposition of KNO₃ particles on soybean leaves by direct measurement of the tracer on the plant surfaces by thermal-ionization mass spectrometry. Submicrometer particles, made from a solution containing 3 |mg mL^-1 neodymium isotope (¹⁴⁸Nd, 87.9%) and 1,000 mg mL^-1 KNO₃, were dispersed with a two-fluid nozzle and released upwind of a soybean field. Total suspended- and size-fractionated-aerosol particles were collected on an open-face filter and in a micro-orifice impactor, respectively, at a distance of 40 m from the release point. Soybean leaves exposed to the plume were collected at distances ranging from 25 to 100 m. As little as 5.5 pg of the tracer (i.e., excess ¹⁴⁸Nd) was detected in soybean leaves at signal-to-noise ratios ranging from 7,500 to 240,000, in the presence of 200 to 2,700 pg of naturally occurring Nd. The dry-particle deposition velocity, determined from the ratio of the aerial concentration and directly deposited aerosol (geometric mass mean diameter, 0.20 mm) flux, and its corresponding analytical uncertainty were 0.30 cm sec^-1 and 2.5%, respectively.     

A Monte-Carlo Simulation of the Ozone Attainment Process

A Monte-Carlo simulation of the approach to attainment of the National Ambient Air Quality Standard for ozone has been performed for the California Bay Area Air Quality Management District. Four compliance tests together with different design values are used in the simulation. The results show that the present compliance test requiring a zero-percent chance of violation and the design value represented by the fourth highest value in three years makes both the standard and the control requirement much more stringent than generally assumed. In fact, to attain the standard on a long-term basis would require annual means and annual second-highest values that are close to those of the rural background ozone. The simulation also shows that by taking into account the fluctuation of ozone concentrations in the compliance test, such as a t test, and by using a design value consistent with the test, a standard defined in terms of the three-year mean of the annual second-highest values not only is more consistent with the currently- perceived stringency of the present standard, but may also be attainable with a more reasonable control requirement.     

Chemical Dynamics of Clouds at Mt. Mitchell,North Carolina

The role of clouds as the primary pathway for deposition of air pollutants into ecosystems has recently acquired much attention. Moreover, the acidity of clouds is highly variable over short periods of time. Cloud water collections were made at Mt. Mitchell State Park, North Carolina, using a real-time cloud and rain acidity/ conductivity (CRAC) analyzer during May to September 1987, 1988 and 1989 in an effort to explore extremes of chemical exposure. On the average, the mountain peak was exposed to cloud episodes about 70 percent of experimental days. The lowest pH of cloud water in nearly real-time (～10 min.) samples was 2.4, while that in hourly integrated samples was 2.6. The cloud pH during short cloud events (mean pH 3.1), whjch results from the orographic lifting mechanism, was lower than that during long cloud events (mean pH 3.5), which are associated with mesoscale or synoptic atmospheric disturbances. On the average, the pH values in nonprecipitating cloud events were about 0.4 pH unit lower than those in precipitating cloud events. Sulfate, nitrate, ammonium and hydrogen ions were found to be the major constituents of cloud water, and these accounted for -90 percent of the ionic concentration. Total ionic concentrations were found to be much higher in non-precipitating clouds (670-3,010 μeq/L) than those in precipitating clouds (220-370 μeq/L). At low acidity, ionic balance is sometimes not obtained. It is suggested that organic acids may provide this balance.

The profile of cloud water ionic concentration versus time was frequently observed to show decrease at the beginning and rising toward the end during short cloud events. Before the dissipation of clouds, a decrease in cloud water pH and an increase in ionic concentration were found. At the same time, temperature and solar radiation increased, and relative humidity and microphysical parameters (liquid water content, average droplet size, and droplet concentration) decreased. These observations suggest that evaporative dissipation of cloud droplets leads to acidification of cloud water. Mean pH of cloud water was 3.4 when the prevailing wind was from the northwest direction, and it was 3.9 when the wind was from the west direction. The effects of variations in cloud liquid water content have been separated from variations in pre-cloud pollutant concentrations to determine the relationship between source intensity and cloud water concentrations.     

Near-source air quality impacts of large olefin flares

Large petrochemical flares, common in the Houston Ship Channel (the Ship Channel) and other industrialized areas in the Gulf of Mexico region, emit hundreds to thousands of pounds per hour of highly reactive volatile organic compounds (HRVOCs). We employed fine horizontal resolution (200 m?×?200 m) in a three-dimensional (3D) Eulerian chemical transport model to simulate two historical Ship Channel flares. The model reasonably reproduced the observed ozone rise at the nearest monitoring stations downwind of the flares. The larger of the two flares had an olefin emission rate exceeding 1400 lb/hr. In this case, the model simulated a rate of increase in peak ozone greater than 40 ppb/hr over a 12 km?×?12 km horizontal domain without any unusual meteorological conditions. In this larger flare, formaldehyde emissions typically neglected in official inventories enhanced peak ozone by as much as 16 ppb and contributed over 10 ppb to ambient formaldehyde up to ～8 km downwind of the flare. The intense horizontal gradients in large flare plumes cannot be simulated by coarse models typically used to demonstrate ozone attainment. Moreover, even the relatively dense monitoring network in the Ship Channel may not be able to detect many transient high ozone events (THOEs) caused by industrial flare emissions in the absence of stagnant air recirculation or stalled sea breeze fronts, even though such conditions are unnecessary for the occurrence of THOEs.

Implications: Flare minimization may be an important strategy to attain the U.S. federal ozone standard in industrialized areas, and to avoid inordinate exposure to formaldehyde in neighborhoods surrounding petrochemical facilities. Moreover, air quality monitoring networks, emission inventories, and chemical transport models with higher spatial and temporal resolution and more refined speciation of HRVOCs are needed to better account for the near-source air quality impacts of large olefin flares.     

Population biology and life strategies of Chlorophthalmus agassizii Bonaparte, 1840 (Pisces: Osteichthyes) in the Mediterranean Sea

The population biology and life strategies of Chlorophthalmus agassizii were studied in the Ionian Sea (eastern–central Mediterranean) using the data collected during the experimental trawl surveys carried out from 1995 to 2000. Depth-related trends of both density and size were found. With depth the former decreased while the latter increased. A typical bigger–deeper phenomenon was detected: young-of-the-year individuals occur on the shelf during autumn–winter months and move towards bathyal bottoms as they grow. The sampled population was made up of several size–age groups. The maximum age of 8 years was identified by means of otolith readings. The Von Bertalanffy growth parameters were estimated from the age–length key (L _∞=189.04±5.401 mm; k=0.24±0.021; t _o=−1.20±0.132; φ′=3.94) and modal progression analysis (L _∞=218.33±18.397 mm; k=0.164±0.028; t _o=−1.694±0.171; φ′=3.89). Reproduction of this monoecious fish was observed during summer–early autumn. Considering the female portion of the gonad, the size at attainment of 50% maturity was 115 mm TL. The corresponding age is within the third year of life. The simultaneous occurrence of oocytes in different development stages was shown in the ovary. Both the asynchronous ovary and oocyte size distribution indicate that C. agassizii spawns more than once during a reproductive season (batch spawner). Functional fecundity (on average 3,018 hydrated oocytes) was between 37 and 69% of the absolute fecundity and increased significantly with the individual size. Since adult specimens are mostly distributed on the slope, eggs and larvae develop in epipelagic waters and migrate in-shore where juvenile forms recruit on the shelf. Juveniles migrate ontogenetically towards deeper bottoms and after 2–3 years start to reproduce annually within a life span greater than 10 years.