核壳结构KNbO3@Co(OH)2的制备及其活化过一硫酸盐降解帕珠沙星的研究

制备了以KNbO₃为载体材料的Co（OH）₂复合材料并对其进行了详细的表征,分析了材料的组成成分、组成形态进而确定了其为核壳结构形貌的KNbO₃@Co（OH）₂.利用合成的样品作为催化剂活化过一硫酸盐（peroxymonosulfate,PMS）来降解帕珠沙星（pazufloxacin,PZF）,结果表明制备的催化剂对PZF的去除效率显著增加.讨论了不同初始PMS剂量对降解效率的影响,发现随着PMS增加可活化生成更多的硫酸根自由基（sulfate radicals,SO₄^·-）和羟基自由基（hydroxyl radicals,HO^·）来降解PZF,但继续增大PMS用量降解效率未见明显提升.酸性和中性pH值条件下利于反应活化PMS降解PZF,而碱性体系减缓反应,甚至强碱体系更易形成Co（OH）₂沉淀不利于反应体系中活性组分CoOH⁺的形成,大大抑制了催化性能.此外,在体系中加入淬灭剂叔丁醇（tert-Butanol,TBA）或者乙醇（ethanol,ETOH）进行自由基的淬灭实验,结果表明SO₄^·-自由基为体系降解PZF过程中主要贡献的自由基,而HO^·自由基的贡献较少.催化剂具有较好的稳定性5次循环之后仍能在10 min之内完全去除PZF.本研究提出了新的思路为制备其他载体的Co（OH）₂核壳结构提供参考依据,同时将该催化剂结合高级氧化技术应用到水体新兴有机污染物净化领域具有很好的应用前景.     

二乙烯三胺五甲叉膦酸酸解磷尾矿的实验探究

为减少磷尾矿堆积带来的环境污染问题,实现磷尾矿的钙、镁、磷元素的分离,以高镁磷尾矿为原料,采用二乙烯三胺五甲叉膦酸(DTPMP)进行酸解,探究磷尾矿中主要物相在DTPMP中的分解机制,并通过单因素实验探究pH、反应时间、反应温度及投料比对磷尾矿中MgO、CaO和P_2O_5分解率的影响。实验结果表明:pH对P_2O_5的分解率影响较大,高温更有利于尾矿中镁的溶出,在pH为2. 5,反应时间为60 min,反应温度为80℃,投料比为1. 56时,MgO、CaO和P_2O_5的分解率分别达到61. 05%、38. 23%和9. 67%。     

多环芳烃污染与儿童内暴露负荷的关系

为了更好地了解环境空气PAHs污染与儿童内暴露负荷之间的关系,该研究在儿童尿液中未代谢PAHs以及代谢PAHs研究的基础上,同时获取了连续3 d空气中PAHs污染浓度。对环境空气中PAHs和尿液中未代谢的PAHs的分析表明:除Nap和Phe以外的其它PAHs单体在环境空气和尿液中占比一致,而且环境空气和尿液中PAHs组成特征一致,均表现为2环PAHs>3环PAHs>4环PAHs的规律;3 d中仅有A-Nap和U-Nap之间存在相关性(P<0.05,R~2=0.999 6)。对尿液中代谢的PAHs和尿液中未代谢的PAHs分析表明:儿童尿液中排出的Nap、Flu和Phe主要以羟基代谢物为主,仅Pyr与OHPyr基本一致。尿液中未代谢PAHs与代谢的PAHs组成特征一致,表现为Nap>Phe>Flu>Pyr和OHNap>OHPhe>OHFlu>OHPyr的规律;仅U-Nap和OHNap 3 d中均存在相关性,U-Phe和OHPhe、U-Pyr和OHPyr仅1 d存在相关性。结合PAHs污染与儿童内暴露负荷的共同研究表明,PAHs内暴露标志物可以在一定程度上反映环境PAHs污染的时间变异性。     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.