Sustainable recycling model: A comparative analysis between India and Tanzania

Higher economic growth in developing countries has caused higher amounts of wastes. Local government authorities in these countries usually fail to provide adequate services to dispose the increasing amounts of waste, resulting in threats for both the population and environment health. There is therefore an urgent need for recycling as a form of waste management in order to stop the devastating effects of solid waste in developing countries. Using a qualitative method of analysis, this study presents a model to measure and rank the sustainability of recycling programs in India and Tanzania. The model consists of six main constructs including “production, economic, governmental, social, technological, and international factors”. The results showed that India outperforms Tanzania in sustainable recycling programs: per capita waste generated per day in Delhi is higher than in Dar es Salaam; the government of India focuses more on developing recycling plans and techniques as compared to the government of Tanzania where the country is not actively involved in the recycling process; and the solid waste management planning in India is being performed better than Tanzania.     

Integrated estuary management for diffused sediment pollution in Dapeng Bay and neighboring rivers (Taiwan)

This work investigated sediment samples collected from Dapeng Bay and three neighboring rivers (Kaoping River, Tungkang River, and Lingbeng River) in southwestern Taiwan, Republic of China. Multivariate statistical analysis techniques, i.e., factor analysis, cluster analysis, and canonical discriminant analysis were used for the evaluation of spatial variations to determine the types of pollution and to identify pollutant sources from neighboring rivers. Factor analysis results showed that the most important latent factors in Dapeng Bay are soil texture, heavy metals, organic matter, and nutrients factors. Contour maps incorporating the factor scores showed heavy metals accumulate along the lakesides, especially on the southeastern banks of the lakes. A cluster analysis was performed using factor scores computed from these latent factors. We then classified these areas into five distinct classes using sampling stations, and we illustrate that in the three river classes, the sediment properties are influenced by industrial and domestic wastewater and agricultural activities (including livestock rearing and farm activities). However, in Dapeng Bay, the rivers were influenced more by complicated biogeochemical processes; these could be identified as a type of pollution. Canonical discriminant analysis illustrated that two constructed discriminant functions made a marked contribution to most of the discriminant variables, and the significant parameters of porosity and Cd, Cr, Al, and Pb content were combined as the ??heavy metal factor??. The recognition capacities of the two discriminant functions were 82.6% and 17.4%, respectively. It is also likely that the annual mean of the water exchange rate is insufficient (taking about 7 days to eliminate pollutants) and therefore has significantly influenced the carbon and nutrient biogeochemical processes and budgets in the semi-enclosed ecosystem. Thus, the sediment properties are not similar between the lagoon and the neighboring rivers. Our results yield useful information concerning estuary recovery and water resources management and may be applicable to other basins with similar characteristics that are experiencing similar coastal environmental issues.     

Carbon fixation efficiency of plants influenced by sulfur dioxide

In the land ecosystem, the forest can absorb the carbon dioxide (CO₂) in the atmosphere and turn the CO₂ into organic carbon to store it in the plant body. About 2 × 10¹¹ tons of CO₂ changes through photosynthesis into organic matter by plant annually. In this research, ten kinds of woody plants were selected for assessing the carbon fixation ability influenced by sulfur dioxide (SO₂). The tested trees were put into a fumigation chamber for 210 days in a 40-ppb SO₂ environment. The results of this study showed that there was no clear symptom of tested trees under a 40-ppb SO₂ environment. The tested trees could tolerate this polluted environment, but it will impact their CO₂ absorption ability. The carbon fixation ability will reduce as the polluted period lengthens. The carbon fixation potential of tested trees ranged from 2.1 to 15.5 g·CO₂/m²·d with an average of 7.7 g·CO₂/m²·d. The changes in CO₂ absorption volume for Messerschmidia argentea were more stable during the fumigation period with a variation of 102%. Among the tested trees, Diospyros morrisiana had the best carbon fixation potential of 9.19 g·CO₂/m²·d and M. argentea had the least with 2.54 g·CO₂/m²·d.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.     

Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.     

Assessment of total concentrations of heavy metals in industrial sludges from the North of Vietnam and their potential impact on the ecosystem

Environmental Science and Pollution Research - Industrial sludges from wastewater treatment plants of industrial parks and a drinking water treatment plant in northern Vietnam were investigated in...     

STOCHASTIC WATER QUALITY ANALYSIS USING RELIABILITY METHOD1

ABSTRACT: This study developed a QUAL2E‐Reliability Analysis (QUAL2E‐RA) model for the stochastic water quality analysis of the downstream reach of the main Han River in Korea. The proposed model is based on the QUAL2E model and incorporates the Advanced First‐Order Second‐Moment (AFOSM) and Mean‐Value First‐Order Second‐Moment (MFOSM) methods. After the hydraulic characteristics from standard step method are identified, the optimal reaction coefficients are then estimated using the Broyden‐Fletcher‐Goldfarb‐Shanno (BFGS) method. Considering variations in river discharges, pollutant loads from tributaries, and reaction coefficients, the violation probabilities of existing water quality standards at several locations in the river were computed from the AFOSM and MFOSM methods, and the results were compared with those from the Monte Carlo method. The statistics of the three uncertainty analysis methods show that the outputs from the AFOSM and MFOSM methods are similar to those from the Monte Carlo method. From a practical model selection perspective, the MFOSM method is more attractive in terms of its computational simplicity and execution time.     

Bioabsorbable Soy Protein Plastic Composites: Effect of Polyphosphate Fillers on Biodegradability

The use of biodegradable polymers made from renewable agricultural products such as soy protein isolate has been limited by the tendency of these materials to absorb moisture. A straightforward approach for controlling the inherent water absorbency of the biodegradable polymers involves blending special bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter in a high-shear mixer followed by compression molding. The procedure yields a relatively water-resistant, biodegradable soy protein polymer composite, as previously reported. The aim of the present study is to determine the biodegradability of the new polyphosphate filler/soy protein plastic composites by monitoring the carbon dioxide released over a period of 120 days. The results suggest that the composites biodegrade satisfactorily, with the fillers having no significant effect on the depolymerization and mineralization of the soy protein plastic, processes that would otherwise result in nonbiodegradable composites. Further, the results indicate that the biodegradation and useful service life of these biocomposites may be controlled by changing the filler concentration, making the biocomposites useful in applications in which the control of water resistance and biodegradation is critical.     

Comment on "Removal of heavy metals from aqueous solution by carbon nanotubes: adsorption equilibrium and kinetics" by Li, Y. H., Di, Z.C., Luan, Z.K., Ding, J., Zuo, H., Wu, X.Q., Xu, C.L. and Wu, D.H.

Recently, Li et al. (Li, 2004 ) published the paper entitled as above. In section 2.2: Adsorption kinetics,authors mentioned three kinetic models, the first-order rate equation, pseudo-second-order rate equation, and secondorder rate equation citing a secondary reference (Benguella,2002). However, there are mistakes occurred in this reference(Ho,2004a).