天然气集配气站综合防雷技术改造

随着天然气生产向自动化、网络化、智能化方向的迅猛发展,大部分天然气集配气站都建立和完善了自动计量、视频监控、生产数据传输、无线通讯等系统。但是随着电气仪表设备和数据线的增多,系统受雷击或因雷电影响受损的概率陡然增加,特别是近几年,天然气集配气站内计量、控制系统设备频繁出现雷击损坏现象。因此,对天然气集配气站实施综合防雷技术改造十分必要。     

Biotoxicity and bioavailability of hydrophobic organic compounds solubilized in nonionic surfactant micelle phase and cloud point system

Environmental Science and Pollution Research - A recent work has shown that hydrophobic organic compounds solubilized in the micelle phase of some nonionic surfactants present substrate toxicity to...     

Experimental study of the bio-oil production from sewage sludge by supercritical conversion process

Environment-friendly treatment of sewage sludge has become tremendously important. Conversion of sewage sludge into energy products by environment-friendly conversion process, with its energy recovery and environmental benefits, is being paid significant attention. Direct liquefaction of sewage sludge into bio-oils with supercritical water (SCW) was therefore put forward in this study, as de-water usually requiring intensive energy input is not necessary in this direct liquefaction. Supercritical water may act as a strong solvent and also a reactant, as well as catalyst promoting reaction process. Experiments were carried out in a self designed high-pressure reaction system with varying operating conditions. Through orthogonal experiments, it was found that temperature and residence time dominated on bio-oil yield compared with other operating parameters. Temperature from 350 to 500 °C and reaction residence time of 0, 30, 60 min were accordingly investigated in details, respectively. Under supercritical conversion, the maximum bio-oil yield could achieve 39.73%, which was performed at 375 °C and 0 min reaction residence time. Meanwhile, function of supercritical water was concluded. Fuel property analysis showed the potential of bio-oil application as crude fuel.     

Hydrothermal solidification behavior of municipal solid waste incineration bottom ash without any additives

Municipal solid waste incineration (MSWI) bottom ash could be solidified with and without slaked lime (calcium hydroxide) addition by a hydrothermal method under steam pressure of 1.56 MPa at 200 °C for up to 72 h. Experimental results showed that CSH gel or tobermorite exerted a main influence on strength development, and without any additives CSH gel was easy to form, while slaked lime addition favored to form tobermorite. Tobermorite seemed to exert a larger effect on the strength development than CSH gel. Leaching results showed that the concentrations of heavy metals dissolved from the solidified specimens were effectively reduced after hydrothermal processing. The immobilization was mainly due to the tobermorite or CSH gel formation, and Pb²⁺ and Zn²⁺ seemed to be fixed more readily than Cr⁶⁺, which might be the reason that the structural Ca²⁺ within tobermorite or CSH gel was exchanged by Pb²⁺ and Zn²⁺ more easily than Cr⁶⁺. In addition, there existed a close relationship between leaching concentration and strength enhancement, and a higher strength seemed to exert a larger effect on immobilization of heavy metals.     

Study on mechanics of crowd jam based on the cusp-catastrophe model

Some characteristics of crowd jam like the phenomena of discontinuous jumping in reality are hard to be explained by the equations governing pedestrians. The catastrophe theory can explain these characteristics. A cusp-catastrophe model is developed to analyze the mechanics of crowd jam by drawing graphs for a cusp-catastrophe model of crowd, the bifurcation set and the projection of catastrophe model. Meanwhile, the critical density and the critical velocity are derived. It is concluded that the cusp model is a more efficient predictor than the linear model or the equations governing pedestrians and is reasonably realistic for dense crowd flow scenarios.     

In_2TiO_5纳米带的静电纺丝法制备及光催化性能

以酞酸丁酯(Ti(OC_4H_9)_4)、硝酸铟(In(NO3)3)和聚乙烯吡咯烷酮(PVP-K30)为原料,采用静电纺丝技术制备了In_2TiO_5纳米带.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见漫反射光谱(UV-vis DRS)和氮气吸附-脱附等温线(BET)等技术对样品进行了表征.考察了In_2TiO_5纳米带在光催化降解罗丹明B(RhB)、甲基橙(MO)、亚甲基蓝(MB)和左氧氟沙星(LEV)过程中的应用性能,研究了不同离子型物质、溶液的pH和MB起始浓度对In_2TiO_5纳米带光催化活性的影响.结果表明:In_2TiO_5纳米带具有正交晶系结构,禁带宽度为3.47 eV,比表面积为20.71 m~2·g~(-1),可应用于4种不同离子型物质的光催化降解,发现光催化效果与被降解物质的表面带电性质有关.在紫外光照射下,90 min,对MB的降解率达98.1%,其降解过程服从一级动力学模型.     

溴氰菊酯对菲律宾蛤仔体内酶活性和组织损伤的初步探索

采用不同质量浓度的溴氰菊酯(0.0070 mg·L~(-1)、0.014 mg·L~(-1)、0.020 mg·L~(-1)、0.027 mg·L~(-1))对菲律宾蛤仔进行20 d半静置染毒,测定不同时间淋巴液中乙酰胆碱酯酶(ACh E)和钠离子-钾离子-三磷酸腺苷酶(Na~+-K~+-ATPase)活性、鳃和肝脏中谷胱甘肽转硫酶(GST)活性的变化,并观察染毒20 d后鳃丝组织和消化盲囊组织的损伤情况。酶活性分析结果显示,与对照组相比,低浓度组(0.0070 mg·L~(-1))试验期间酶活性均无显著差异(P0.05);中浓度组(0.014 mg·L~(-1)、0.020 mg·L~(-1))淋巴液中ACh E和Na~+-K~+-ATPase均呈先激活后抑制的变化规律(P0.05),鳃和肝脏中GST活性均呈上升趋势(P0.05);高浓度组(0.027mg·L~(-1))淋巴液中ACh E和Na~+-K~+-ATPase、肝脏中GST活性在试验期间持续下降(P0.01),而鳃中GST活性呈先抑制后升高的趋势(P0.05)。研究表明,低中浓度的溴氰菊酯对菲律宾蛤仔体内的酶活性表现为先诱导后抑制,具有明显的时间、剂量效应;高浓度的溴氰菊酯对菲律宾蛤仔体内酶活持续抑制,且染毒浓度越高,组织细胞变异越显著,表现为鳃丝上皮细胞纤毛层萎缩、纤毛脱落,消化盲囊上皮细胞膨胀,出现包涵体样结构。     

Mg2+ improves biomass production from soybean wastewater using purple non-sulfur bacteria

Soybean wastewater was used to generate biomass resource by use of purple non-sulfur bacteria(PNSB). This study investigated the enhancement of PNSB cell accumulation in wastewater by Mg2+under the light-anaerobic condition. Results showed that with the optimal Mg2+dosage of 10 mg/L, biomass production was improved by 70% to 3630 mg/L,and biomass yield also was improved by 60%. Chemical Oxygen Demand(COD) removal reached above 86% and hydraulic retention time was shortened from 96 to 72 hr. The mechanism analysis indicated that Mg2+could promote the content of bacteriochlorophyll in photosynthesis because Mg2+is the bacteriochlorophyll active center, and thus improved adenosine triphosphate(ATP) production. An increase of ATP production enhanced the conversion of organic matter in wastewater into PNSB cell materials(biomass yield) and COD removal, leading to more biomass production. With 10 mg/L Mg2+, bacteriochlorophyll content and ATP production were improved by 60% and 33% respectively.