Methane and carbon dioxide emission in a two-phase olive oil mill sludge windrow pile during composting

The aim of this work was to make some preliminary evaluations on CO(2) and CH(4) emissions during composting of two-phase olive oil mill sludge (OOMS). OOMS, olive tree leaves (OTL) and shredded olive tree branches (OTB) were used as feedstock for Pile I and Pile II with a 1:1:1 and 1:1:2v/v ratio, respectively. Each pile was originally 1.2m high, 2.0m wide and approximately 15.0m long. Four 500 ml volume glass funnels were inverted and introduced in each pile, two in the core (buried 50-60 cm from the surface) and two near the surface under a thin 10-15 cm layer of the mixture. Thin (0.5 cm diameter) plastic, 80 cm long tubes were connected to the funnels. A mobile gas analyser (GA2000) was used to measure the composition (by volume) of O2, CO2 and CH4 on a daily basis. The funnels were removed prior to each turning and reinserted afterwards. From each pair of funnels (core and surface) of both piles, one was kept closed between samplings. Two way ANOVA was used to test differences between piles and among the tubes. Post hoc Tukey tests were also used to further investigate these differences. There was a significant difference (at p<0.001) in the two piles for all three gases. The average concentrations of O2, CO2 and CH4 in Pile I, from all four funnels was 16.86%, 3.89% and 0.25%, respectively, where for Pile II the average values were 18.07%, 2.38% and 0.04%, respectively. The presence of OOMS in larger amounts in Pile I (resulting in more intense decomposing phenomena), and the larger particle size of OTB in Pile II (resulting in increasing porosity) are the probable causes of these significant differences. Samples from open funnels presented lower, but not significantly lower, O2 composition (higher for CO2 and CH4) in comparison with closed funnels in both depths and both piles. Not significant were also the different mean gas compositions between core and surface funnels in the same pile.     

Effects of Oxalis pes-caprae L. invasion in olive groves

The present work aimed at studying the effect of Oxalis pes-caprae invasion in the herbaceous understory of olive groves in the island of Lesvos, Greece. The number of species, their biomass and dead plant material production was followed throughout the vegetative period in invaded and non-invaded plots. Species richness in the area invaded by O. pes-caprae gradually declined and was significantly smaller in comparison with the natural vegetation. Although biomass was equal in the invaded and non-invaded areas 1 month after germination, annual net primary production (NPP) was three times smaller in the invaded than the non-invaded area. Moreover, aboveground dead plant material of O. pes-caprae decomposed faster than a mixture of litter species of the natural vegetation. Lower biomass production in combination with increased decomposition rates of O. pes-caprae is expected to lead to reduced soil C sequestration in invaded areas. It was concluded that although O. pes-caprae does not add a new life form or functional type to the invaded herbaceous system it has considerable impacts on the diversity and ecosystem functions in olive groves.     

Thermal exploitation of wastes with lignite for energy production

The thermal exploitation of wastewood with Greek lignite was investigated by performing tests in a laboratory-scale fluidized bed reactor, a 1-MW(th) semi-industrial circulating fluidized bed combustor, and an industrial boiler. Blends of natural wood, demolition wood, railroad sleepers, medium-density fiberboard residues, and power poles with lignite were used, and the co-combustion efficiency and the effect of wastewood addition on the emitted pollutants were investigated. Carbon monoxide, sulfur dioxide, and oxides of nitrogen emissions were continuously monitored, and, during the industrial-scale tests, the toxic emissions (polychlorinated dibenzodioxins and dibenzofurans and heavy metals) were determined. Ash samples were analyzed for heavy metals in an inductively coupled plasma-atomic emission spectroscopy spectrophotometer. Problems were observed during the preparation of wastewood, because species embedded with different compounds, such as railway sleepers and demolition wood, were not easily treated. All wastewood blends were proven good fuels; co-combustion proceeded smoothly and homogeneous temperature and pressure profiles were obtained. Although some fluctuations were observed, low emissions of gaseous pollutants were obtained for all fuel blends. The metal element emissions (in the flue gases and the solid residues) were lower than the legislative limits. Therefore, wastewood co-combustion with lignite can be realized, provided that the fuel handling and preparation can be practically performed in large-scale installations.     

Removal of olive mill waste water phenolics using a crude peroxidase extract from onion by-products

Olive mill waste water (OMWW) originating from a two-phase olive oil-producing plant was treated with a crude peroxidase extract prepared from onion solid by-products. The treatments were based on a 3 × 3 factorial design, employing a series of combinations of pH and H₂O₂, in order to identify optimal operational conditions. The treatment performance was assessed by estimating the removal percentage of total polyphenols. The model established produced a satisfactory fitting of the data (R ² = 0.94, p = 0.0158), while the second-order polynomial equation used to describe the process indicated that peroxidase-catalysed polyphenol removal in diluted OMWW is facilitated at relatively low pH and intermediate H₂O₂ values. A predicted value of 50.7 ± 9.5% removal was calculated under optimal operational conditions (pH 2.76, [H₂O₂] = 3.56 mM). Analysis of an untreated and an optimally treated sample by high performance liquid chromatography revealed that enzyme treatment brought about alteration in the original OMWW polyphenolic profile. The use of peroxidase from onion solid by-products is proposed as an alternative means that could have a prospect in bioremediation applications.     

Experienced males have higher mating success than virgin males despite fitness costs to females

It is generally assumed that mating history has potentially important effects on the mating biology of insects, and differences in mating success of males, in relation to their mating history, have been commonly documented in Lepidoptera. Mating success of male European corn borer Ostrinia nubilalis, in relation to their mating history, and consequent fitness parameters for their female mates, were investigated. Mating experience significantly increased mating success for O. nubilalis males. Mating with experienced males significantly reduced lifetime fecundity and longevity of females. Sperm depletion, transfer of less nutritive substances or more toxic substances may explain the female response to mating with experienced males. Male persistence or some other compensatory mechanism may account for female acceptance of experienced males.     

Measuring the antioxidant activity of olive oil mill wastewater using chemiluminescence

A sensitive and simple procedure is described for determining the total phenolic/antioxidant levels of olive oil mill wastewater (OMW), using for the first time Co(II)/ethylenediaminetetracetic acid (EDTA)-induced luminol chemiluminescence. Olive oil wastewater samples were tested for their composition in simple phenolic compounds as a function of the extraction system (two- and three-phase centrifugation systems). The results revealed that the three-phase system had a stronger antioxidant activity and a higher total phenolic content than the two-phase system. The relationship between antioxidant values and total phenolic content is also discussed.     

A heuristic expert system for forest fire guidance in Greece

Forests and forestlands are common inheritance for all Greeks and a piece of the national wealth that must be handed over to the next generations in the best possible condition. After 1974, Greece faces a severe forest fire problem and forest fire forecasting is the process that will enable the Greek ministry of Agriculture to reduce the destruction. This paper describes the basic design principles of an Expert System that performs forest fire forecasting (for the following fire season) and classification of the prefectures of Greece into forest fire risk zones. The Expert system handles uncertainty and uses heuristics in order to produce scenarios based on the presence or absence of various qualitative factors. The initial research focused on the construction of a mathematical model which attempted to describe the annual number of forest fires and burnt area in Greece based on historical data. However this has proven to be impossible using regression analysis and time series. A closer analysis of the fire data revealed that two qualitative factors dramatically affect the number of forest fires and the hectares of burnt areas annually. The first is political stability and national elections and the other is drought cycles. Heuristics were constructed that use political stability and drought cycles, to provide forest fire guidance. Fuzzy logic was applied to produce a fuzzy expected interval for each prefecture of Greece. A fuzzy expected interval is a narrow interval of values that best describes the situation in the country or a part of the country for a certain time period. A successful classification of the prefectures of Greece in forest fire risk zones was done by the system, by comparing the fuzzy expected intervals to each other. The system was tested for the years 1994 and 1995. The testing has clearly shown that the system can predict accurately, the number of forest fires for each prefecture for the following year. The average accuracy was as high as 85.25% for 1995 and 80.89% for 1994. This makes the Expert System a very important tool for forest fire prevention planning.     

Sustainable tourism management and development of a Greek coastal municipality

A process is presented to facilitate the sustainable management and development of tourist destinations. Based on a specific reforming of the Limits of Acceptable Change planning system and combined with the Tourism Carrying Capacity concept into a common framework, specific steps are described to integrate environmental, social and economic information of a tourist destination into indicators, which are afterwards compared with reference conditions. The Leopold matrix is applied to identify and classify restrictions of development and provide the basis for negotiations between managers, stakeholders and local communities. Through a feedback process of continuous monitoring and adjustment, the aim is to focus developmental activities on restricting factors until all indicators upgrade to reference. A case study at a Greek coastal municipality (Ilida – western Greece) is applied to demonstrate the process. Activity zones are identified and 18 indicators are selected. Results suggest high potential for tourism development of the area. However, low scores are assigned to 8/18 indicators, reflecting restrictions, requiring priority under a sustainable development plan. The proposed process offers managers and stakeholders the ability to easily visualize/identify restrictions and assign developmental priorities within a step-by-step upgrading process, toward the sustainable management and development of tourist destinations.     

Leaching of metals in buried industrial sludge,spiked with cadmium,chromium and lead. Results of a trial

Sludge resulting from industrial waste water treatment at the industrial area of Patras, Greece, was spiked with cadmium, chromium and lead and entrenched in 4 experimental trenches. Soil from the unsaturated zone and sludge from the trenches were sampled at successive time points over a period of 14 months to monitor the movement of metals. Results showed that 94% of cadmium and 80% of lead but only 32% of chromium migrated from the sludge just 14 months after the entrenchment.

At the end of this time the buried sludge could be considered stabilised, as indicated by the total nitrogen content. Cd content in underlying soil layers at 3 m depth showed an increase in the first 7 months followed by a decrease, afterwards. Soil Pb concentration at 3 and 6 m depth was significantly high, in relation to it's initial concentration 14 months after the entrenchment. Pb and Cd in the soil samples were negatively correlated. It is suggested that lead displaces cadmium in the sediments.