Indoor exposure to respirable particulate matter and particulate-phase PAHs in rural homes in North India

In order to evaluate the exposure of the northern India rural population to polyaromatic hydrocarbon (PAH) inhalation, indoor pollution was assessed by collecting and analyzing the respirable particulate matter PM_2.5 and PM₁₀ in several homes of the village Bhithauli near Lucknow, UP. The home selection was determined by a survey. Given the nature of biomass used for cooking, homes were divided into two groups, one using all kinds of biomass and the second type using plant materials only. Indoor mean concentrations of PM_2.5 and associated PAHs during cooking ranged from 1.19 ± 0.29 to 2.38 ± 0.35 and 6.21 ± 1.54 to 12.43 ± 1.15 μg/m³, respectively. Similarly, PM₁₀ and total PAHs were in the range of 3.95 ± 1.21 to 8.81 ± 0.78 and 7.75 ± 1.42 to 15.77 ± 1.05 μg/m³, respectively. The pollutant levels during cooking were significantly higher compared to the noncooking period. The study confirmed that indoor pollution depends on the kind of biomass fuel used for cooking.     

A Time-Dependent System for Evaluating Groundwater Contamination Hazard Rating of Municipal Solid Waste Dumps

In developing countries, several old municipal solid waste dumps (unlined landfills) exist adjacent to large cities, releasing contaminants to the underlying aquifer, thus posing the hazard of groundwater contamination. These uncontrolled waste dumps need to be prioritized in terms of the groundwater contamination hazard posed by them, so that necessary control and remedial measures can be undertaken in a phased manner. This paper presents a time-dependent system for evaluating groundwater contamination hazard rating of municipal solid waste dumps. The system is based on source–pathway–receptor relationships and evaluates the relative value of hazard posed by a site over its entire leaching life, on a scale of 0–1,000. The system parameters have been selected based on literature and expert opinions. The Delphi technique is used to derive the relative importance weights of the system parameters. The proposed system is compared with six selected existing hazard rating systems. The comparison, made by way of score range analysis, shows that the proposed system exhibits a much wider range of hazard scores for various scenarios of site conditions, and hence the proposed system is more sensitive to varied site conditions. The application of different systems to six municipal solid waste dumps located in four cities of India shows that, whereas the existing systems individually produce clustered scores and return the same rank to more than one site, the proposed system produces significantly varying scores and return different ranks to different sites. This demonstrates that the proposed system improves decision making and makes a better basis for prioritization of municipal solid waste dumps for adopting control and remedial measures.     

Short-term leaching study of heavy metals from LD slag of important steel industries in Eastern India

Journal of Material Cycles and Waste Management - Considering Linz-Donawitz (LD) slag as a waste material for its bulk utilisation, there is a possibility that heavy metals will leach to...     

Ggum-poly(Itaconic Acid) Based Superabsorbents Via Two-Step Free-Radical Aqueous Polymerization for Environmental and Antibacterial Applications

Ggum-based conducting hydrogels possessing dye removal and antibacterial property were developed by two-step free-radical aqueous polymerization method. Conductivity was introduced with polyaniline (PANI) chains incorporated within the crosslinked network of Ggum-poly(itaconic acid) superabsorbent. The material properties of the synthesized samples were characterized using FTIR spectroscopy, thermal analysis and scanning electron microscopy techniques. Results showed that synthesized samples exhibited the best antibacterial activity against Gram-positive bacteria. Synthesized samples were found to be effective in removal of toxic methylene blue (MB) dye from the waste water. The adsorption kinetics of superabsorbents has been described by using pseudo first and pseudo second order kinetics models. Furthermore, application of hydrogels to improve the water retention properties of different soils was also studied for agricultural purpose.     

Biodegradation of Natural Rubber and Natural Rubber Products by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. Strain CFMR 7

The rubber degrading activity of Streptomyces sp. CFMR 7 whose whole genome sequence was recently determined was tested with non-vulcanized fresh latex and common vulcanized rubber products such as latex glove, latex condom and latex car tyre. The degradation activity was unequivocally demonstrated by scanning electron microscopy with respect to microbial colonization efficiency, disintegration of rubber material and biofilm formation after 3, 6 and 9 months of inoculation. Fourier transform infrared spectroscopy comprising the attenuated total reflectance analysis on these inoculated products revealed insights into the biodegradation mechanism of this strain whereby, a decrease in the number of cis -1,4 double bonds in the polyisoprene chain, the appearance of ketone and aldehyde groups formation indicating an oxidative attack at the double bond of rubber hydrocarbon. In the presence of strain Streptomyces sp. CFMR 7, gel permeation chromatography analysis revealed a significant shift of the molecular weight distribution to lower values. Clear decrease in the molecular weight was observed over 3, 6 and 9 months of cultivation on fresh latex samples compared to other vulcanized products. No shift in the molecular weight distribution was observed for non-inoculated control. These results clearly showed that Streptomyces sp. CFMR 7 was able to cleave the carbon backbone of poly (cis -1,4-isoprene). Although this strain was able to degrade both non-vulcanized and vulcanized rubber products, faster degradation was obtained with natural rubber and rubber products with low complexity.     

Phytoplanktonic Community of Organically Polluted Tropical Reservoirs in Eastern India

Plankton is a kaleidoscopic spectrum of organisms with repre-sentatives from almost all phyla of animals and thousands of non-flowering plants. Unicellular protozoans, invertebrates and bacteriato diatoms all drift around as the plankton community. The produc-tion rate of plankton is determined by a host of environmental pa-rameters like physico-chemical properties of water and soil, mete-orological characteristics of the region, and morphometric and hy-drographic features of the water body[3]…     

Antagonistic potential of fluorescent pseudomonads and control of charcoal rot of chickpea caused by Macrophomina phaseolina

The effectiveness of plant growth promoting rhizobacteria especially Pseudomonas fluorescens isolates were tested against charcoal rot of chickpea both in green house as well as in field conditions. Most of the isolates reduced charcoal rot disease and promoted plant growth in green house. A marked increase in shoot and root length was observed in P. fluorescens treated plants. Among all the P. fluorescens isolates Pf4-99, was found most effective in the improvement of chickpea crop in green house as well as in field. Pf4-99 effectively promoted plant growth and produced indole acetic acid in culture medium. This isolate also inhibited the mycelial growth of the M. phaseolina under in vitro conditions and reduced the disease severity Potential isolate (Pf4-99) also significantly increased the biomass of the chickpea plants, shoot length, root length and protein content of the chickpea seeds. A part from these, the total number of seeds per plant and their weight were also enhanced. The colonization of Pf4-99 reduced the incidence of seed mycoflora by which indirectly enhanced the seed germination and vigour index of seedlings. The observations revealed that isolate Pf4-99 is quite effective to reduce the charcoal rot disease both in field and greenhouse, and also increases seed yields significantly Therefore, this isolate appears to be an efficient biocontrol agent against charcoal rot disease as well as yield increasing rhizobacterium.     

Management of hazardous road derived respirable particulates using magnetic properties of tree leaves

The magnetic properties of tree leaves along with their ecological, economical and aesthetic importance can be used to control road derived respirable particulates. Isothermal remanent magnetization (IRM₃₀₀ mT) of three different tree leaves viz. Mango (Mangifera indica), Sisso (Dalbergia sisso) and Banyan (Ficus benghalensis) were determined and IRM₃₀₀ mT normalized for the leaf area. The normalized 2-D magnetization of leaves as shown by results is dominantly controlled by leaf morphology and traffic density. F. benghalensis (Banyan) leaf has highest 2-D magnetization and D. sisso (Sisso) leaf having least 2-D magnetization suggesting greater ability of F. benghalensis (Banyan) tree leaves to reduce magnetic particulates. The particle size of the magnetic grains falls in the category of PM2.5, a particle size hazardous to human health due to its capacity to be inhaled deeply into the lungs.     

Dynamics of traffic noise in a tropical city Varanasi and its abatement through vegetation

Noise level monitoring and its reduction with different width and height of vegetation belt were studied in the Varanasi city. Noise level monitoring of the Varanasi city revealed the fact that area category A (without vegetation) was highly polluted as compare to area category B (with vegetation) having less fluctuation of traffic load. Four plant species Putranjeva roxburghi, Cestrum nocturnum, Hibiscus rosasinensis and Murraya peniculata were tested for noise reduction study at different frequencies. Experiment revealed the fact that H. rosasinensis reduced noise highest at both low and high frequencies (100-500 Hz, 22 dB and 2.5-6.3 KHz 26 dB), followed by M. peniculata (100-500 Hz, 18 dB and 2.5-6.3 KHz 20 dB), P. roxburghi (100-500 Hz 15 dB and 2.5-6.3 KHz 17 dB) and C. nocturnum (100-500 Hz 9 dB and 2.5-6.3 KHz 14 dB). Significance of vegetation belt in noise reduction was established with multiple regression models.     

Isotopic evidence for in-lake production of accumulating nitrate in Lake Superior.

A century-long increase in nitrate (NO3-) in the water column of Lake Superior is a classic example of recent nitrogen accumulation in ecosystems, but its cause and relationship to historical NO3- deposition is unknown. We used stable isotope ratios of oxygen and nitrogen in nitrate (delta18O-NO3 and delta15N-NO3) to examine its sources in this large lake, which represents 10% of the world's surficial liquid freshwater. The most parsimonious hypothesis to explain the rise in NO3- is that the lake is accruing NO3- deposited directly on the lake surface because it is too unproductive to completely assimilate all of it. Data for delta18O-NO3 in external sources and the water column, however, are inconsistent with this hypothesis. Instead, the isotopic evidence indicates strongly that the accumulating NO3- is almost entirely derived from nitrification occurring within the lake. While increases in atmospheric deposition of NO3- may have played a role in its buildup in the lake, other factors such as increases in NH4+ and dissolved organic nitrogen inputs from precipitation or rivers, increases in nitrogen fluxes from the sediments, and decreases in burial rates must also be considered as potential drivers of rising NO3-. The sustained accumulation of nitrogen in Lake Superior is thus more complex and incompletely understood than previously assumed.