典型行业中水回用技术及水质评价标准浅析

在水资源日益短缺的今天,中水回用作为开源节流的有效途径,将成为今后的发展趋势。文章介绍了电子、汽车制造、啤酒等几个典型行业中水回用技术,并对回用水质的评价标准如何制定作出探讨。     

液中放电等离子体降解TNT废液数学模型研究

文章采用液中放电等离子体降解TNT废液,影响降解的因素为放电时间、放电电压、电极间距、气流量、初始浓度、初始电导,采用了无因次方法对降解效率与影响因素之间进行了关联,建立了降解过程的数学模型,并对数学模型进行了分析,得出的结论是:模型方程的置信度为0.71,方程回归系数都显著不等于零,所求的模型是实用的,这为下一步的放大改进工作奠定了良好的基础。     

中国发展低碳经济的路径选择

绿色技术创新和建立碳排放权市场交易机制是促进低碳经济发展的主要措施。前者的实施主体是企业,后者的实施主体是政府。文章分析了在市场和垄断两种情况下的碳排放交易机制与绿色技术创新结合的结果的变化。分析认为,在市场机制充分发挥作用时,绿色技术创新可以替代碳排放权;在存在垄断的情况下,绿色技术创新对碳排放权具有补充作用;碳排放交易制度与绿色技术创新结合起来是中国发展低碳经济的必然选择;现阶段,碳排放权的分配应以免费分配为主,有偿分配为辅。     

低碳经济背景下河北省产业结构调整运行机制探索

主要分析了河北省发展低碳经济优化升级产业结构的驱动力,借鉴发达国家低碳经济与产业结构调整运行机制的实践经验,提出了发展河北省低碳经济与产业结构调整运行机制的策略。     

FMEA在乳化炸药螺杆泵中的应用

以乳化炸药螺杆泵为研究对象,画出系统功能方框图和可靠性方框图,应用故障模式及影响分析方法(FMEA),确定螺杆泵的各种可能故障模式、故障原因和故障影响。同时计算出各故障的风险度,并依次对故障进行分级,找出对螺杆泵危害严重的故障。最后建立FMEA表格,并根据分析结果提出提高其可靠性的建议措施。     

The dynamic links among energy consumption,tourism growth,and the ecological footprint: the role of environmental quality in 38 IEA countries

Environmental Science and Pollution Research - We examine the impact of energy consumption and tourism growth on the ecological footprints and economic growth of 38 International Energy Agency...     

硫化砷渣全湿法制备单质砷的研究

以硫化砷渣为原料,用氯化铜酸性溶液浸出砷渣的全湿法进行实验,着重研究氯化铜浸出砷的过程中氯化铜用量、溶液p H和浸出时间对砷浸出率的影响,探讨用氯化亚锡还原砷盐酸溶液从硫化砷渣得到单质砷的方法。     

室内空气污染对人类健康的影响及防治措施

本文通过论述第三污染源室内空气污染对人类健康的危害,并提出了主要防治措施。     

基于系统动力学模型的清河流域产业结构优化研究

基于清河流域近年的"经济-社会"现状特点与发展趋势,以2010年为水平基准年,建立清河流域产业结构优化SD模型,将整个系统分为人口及生活子系统、经济子系统、用水子系统和污染物子系统。设置四种情景方案进行模拟,模拟时间为2010年到2020年,通过各个方案结果对比分析选出方案四为最优方案。并根据最优方案提出清河流域产业结构优化的建议,从而为清河流域经济的健康可持续发展提供科学的决策依据。     

Triboelectric charging behavior of wood particles during pellet handling processes

Electrostatic charges accumulated on wood particles through triboelectrification during their transportation and handling processes can cause hazardous electrical discharge which may further trigger dust explosion. In this work, tribo-charging behavior of different kinds of wood particles was investigated by a vibrating plate charging method. It was found that reduction in the work function difference between contact bodies might contribute to the reduction of tribo-charge generation, while the reduction of electrical resistivity of wood pellets could effectively accelerate the charge dissipation. As the particle size decreases, accumulated charges increase significantly. In contrast, higher moisture content of wood particles leads to lower charge accumulation due to an accelerated charge dissipation rate. Tribo-charging behaviors of white pellets, torrefied pellet, steam treated pellets and dark pellets have also been investigated. Compared to the white pellets, they all have shown a reduction on charge accumulation to some extent. However, results suggested that all of them have nearly equivalent tribo-charge density as coal and wheat grains used as references in this study.