River Channel Geometry and Rating Curve Estimation Using Height above the Nearest Drainage

River channel geometry is an important input to hydraulic and hydrologic models. Traditional approaches to quantify river geometry have involved surveyed river cross sections, which cannot be extended to ungaged basins. In this paper, we describe a method for developing a synthetic rating curve to relate flow to water level in a stream reach based on reach‐averaged channel geometry properties developed using the Height above Nearest Drainage (HAND) method. HAND uses a digital elevation model (DEM) of the terrain and computes the elevation difference between each land surface cell and the stream bed cell to which it drains. Taking increments in water level in the stream, HAND defines the inundation zone and a water depth grid within this zone, and the channel characteristics are defined from this water depth grid. We apply our method to the Blanco River (Texas) and the Tar River (North Carolina) using 10‐m terrain data from the United States Geological Survey (USGS) 3D Elevation Program (3DEP) dataset. We evaluate the method's performance by comparing the reach‐average stage‐river geometry relationships and rating curves to those from calibrated Hydrologic Engineering Center's River Analysis System (HEC‐RAS) models and USGS gage observations. The results demonstrate that after some adjustment, the river geometry information and rating curves derived from HAND using national‐coverage datasets are comparable to those obtained from hydraulic models or gage measurements. We evaluate the inundation extent and show our approach is able to capture the majority of the Federal Emergency Management Agency (FEMA) 100‐year floodplain.     

Treatment of industrial landfill leachate by means of evaporation and reverse osmosis

In this paper a process for the treatment of landfill leachate involving evaporation and reverse osmosis was proposed. Experimental tests were performed on an industrial landfill leachate. The leachate was subjected to evaporation so as to obtain a distillate containing a small amount of organic material and a substantial amount of inorganic substances (consisting primarily of metals and ammonium salts). The distillate of the evaporation treatment was then subjected to reverse osmosis. The reverie osmosis tests were performed using two different membranes: the AD membrane (thin two-ply film of polyamide) and the SC membrane (thin three-ply film of polyamide). Tests carried out at different values of pH showed a reduction of organic content of about 88% when AD membranes were used and about 80% with SC membranes independently of pH. As regards ammonium, comparable reductions of over 97% were registered for both types of membrane in the optimal conditions of pH = 6.4 (97.1% for AD membranes and 97.7% for SC).     

Concentration of arsenic in water, sediments and fish species from naturally contaminated rivers

Arsenic (As) may occur in surface freshwater ecosystems as a consequence of both natural contamination and anthropogenic activities. In this paper, As concentrations in muscle samples of 10 fish species, sediments and surface water from three naturally contaminated rivers in a central region of Argentina are reported. The study area is one of the largest regions in the world with high As concentrations in groundwater. However, information of As in freshwater ecosystems and associated biota is scarce. An extensive spatial variability of As concentrations in water and sediments of sampled ecosystems was observed. Geochemical indices indicated that sediments ranged from mostly unpolluted to strongly polluted. The concentration of As in sediments averaged 6.58 μg/g ranging from 0.23 to 59.53 μg/g. Arsenic in sediments barely followed (r = 0.361; p = 0.118) the level of contamination of water. All rivers showed high concentrations of As in surface waters, ranging from 55 to 195 μg/L. The average concentration of As in fish was 1.76 μg/g. The level of contamination with As differed significantly between species. Moreover, the level of bioaccumulation of As in fish species related to the concentration of As in water and sediments also differed between species. Whilst some fish species seemed to be able to regulate the uptake of this metalloid, the concentration of As in the large catfish Rhamdia quelen mostly followed the concentration of As in abiotic compartments. The erratic pattern of As concentrations in fish and sediments regardless of the invariable high levels in surface waters suggests the existence of complex biogeochemical processes behind the distribution patterns of As in these naturally contaminated ecosystems.     

Bioaccessibility of metals in soils: comparison between chemical extractions and in vitro tests

It is well-known that the total metal content in soils is not a good indicator of their harmful effects, leading to an overestimation of risks. Toxicological and environmental hazards depend on the chemical species and on its bioavailability to target organisms. Because a good estimation of bioavailability is difficult, a good compromise is to assess bioaccessibility, defined as the maximum amount of a pollutant which is potentially absorbable by a target organism. This study presents a comparison of different strategies to measure metal bioaccessibility in soils. Three procedures were applied to real soil samples with different levels of metal contamination: pseudo-total metal attack, selective sequential extractions and in vitro tests (deliberately developed to simulate human or mammals digestion). Considering the first step of the selective extraction procedure, which can provide the bioaccessible fraction for deposit-feeder organisms, data obtained for each metal were lower than those obtained from in vitro tests. Therefore, it is possible to highlight that this extraction tends to underestimate metal bioaccessibility in soils for humans, while in vitro tests certainly will overestimate bioaccessibility for organisms as invertebrates. If the sum of first and second step of sequential procedure is considered, results are quite similar to those obtained from in vitro tests, but this kind of procedure would require two days of work rather than a few hours required to perform an in vitro test. Results highlight the diversity among the differently defined bioaccessible fractions and the need to apply the most suitable procedure depending on the target organism.     

Topological analysis of the ecological importance of elasmobranch fishes: A food web study on the Gulf of Tortugas, Colombia

We built a trophic network based on a matrix of interspecific trophic relationships to assess the role of elasmobranch fishes in shaping community structure of the Gulf of Tortugas in the Colombian Pacific Ocean. We analyzed diet similarities to define trophic components (nodes) - rather than taxonomical groups - in the network. We evaluated the ecological function of species or trophic entities through topological analysis of their structural importance in trophic networks by applying one local and several mesoscale network indices. We found that top predatory elasmobranchs play an important ecological role in top-down control and in propagating indirect effects through the system owing to high values of the node degree, centrality and topological importance indices. However, invertebrates and teleost fishes had higher connectivity and topological importance than other elasmobranchs in the network before and after removal of top predators from the system. Results from our study thus suggest that elasmobranchs at intermediate trophic levels - commonly referred to as “mesopredators” - are not so important in all complex coastal ecosystems as previously reported.     

Coupled hydromechanical modeling of CO2 sequestration in deep saline aquifers

Sequestration of carbon dioxide (CO₂) in deep saline aquifers has emerged as an option for reducing greenhouse gas emissions to the atmosphere. The large amounts of supercritical CO₂ that need to be injected into deep saline aquifers may cause large fluid pressure increases. The resulting overpressure may promote reactivation of sealed fractures or the creation of new ones in the caprock seal. This could lead to escape routes for CO₂. In order to assess the probability of such an event, we model an axisymmetric horizontal aquifer–caprock system, including hydromechanical coupling. We study the failure mechanisms, using a viscoplastic approach. Simulations illustrate that, depending on boundary conditions, the least favorable moment takes place at the beginning of injection. Initially, fluid pressure rises sharply because of a reduction in permeability due to desaturation. Once CO₂ fills the pores in the vicinity of the injection well and a capillary fringe is fully developed, the less viscous CO₂ displaces the brine and the capillary fringe laterally. The overpressure caused by the permeability reduction within the capillary fringe due to desaturation decreases with distance from the injection well. This results in a drop in fluid pressure buildup with time, which leads to a safer situation. Nevertheless, in the presence of low-permeability boundaries, fluid pressure continues to rise in the whole aquifer. This occurs when the radius of influence of the injection reaches the outer boundary. Thus, caprock integrity might be compromised in the long term.     

Hormetic effect(s) of tetracyclines as environmental contaminant on Zea mays

Animal wastes from intensive pig farming as fertilizers may expose crops to antimicrobials. Zea mays cultivations were carried out on a virgin field, subjected to dressing with pig slurries contaminated at 15 mg L⁻¹ of Oxy- and 5 mg L⁻¹ of Chlor-tetracycline, and at 8 mg L⁻¹ of Oxy and 3 mg L⁻¹ of Chlor, respectively. Pot cultivation was performed outdoor (Oxy in the range 62.5-1000 ng g⁻¹ dry soil) and plants harvested after 45 days. Tetracyclines analyses on soils and on field plants (roots, stalks, and leaves) did not determine the appreciable presence of tetracyclines. Residues were found in the 45-day pot corn only, in the range of 1-50 ng g⁻¹ for Oxy in roots, accounting for a 5% carry-over rate, on average. Although no detectable residues in plants from on land cultivations, both experimental batches showed the same biphasic growth form corresponding to a dose/response hormetic curve.     

Integrating Climate Change into Habitat Conservation Plans Under the U.S. Endangered Species Act

Habitat Conservation Plans (HCPs) under the Endangered Species Act (ESA) are an important mechanism for the acquisition of land and the management of terrestrial and aquatic ecosystems. HCPs have become a vital means of protecting endangered and threatened species and their habitats throughout the United States, particularly on private land. The scientific consensus that climate is changing and that these changes will impact the viability of species has not been incorporated into the conservation strategies of recent HCPs, rendering plans vulnerable biologically. In this paper we review the regulatory context for incorporating climate change into HCPs and analyze the extent to which climate change is linked to management actions in a subset of large HCPs. We conclude that most current plans do not incorporate climate change into conservation actions, and so we provide recommendations for integrating climate change into the process of HCP development and implementation. These recommendations are distilled from the published literature as well as the practice of conservation planning and are structured to the specific needs of HCP development and implementation. We offer nine recommendations for integrating climate change into the HCP process: (1) identify species at-risk from climate change, (2) explore new strategies for reserve design, (3) increase emphasis on corridors, linkages, and connectivity, (4) develop anticipatory adaptation measures, (5) manage for diversity, (6) consider assisted migration, (7) include climate change in scenarios of water management, (8) develop future-oriented management actions, and (9) increase linkages between the conservation strategy and adaptive management/monitoring programs.     

Effect of aging on catalytic properties in mechanochemical degradation of pentachlorophenol by birnessite

Mechanochemistry, a technique concerning with milling contaminated samples for prolonged times, induces massive degradation of pollutants by grinding them in ball mills with different soil components or additives. In the present study, laboratory experiments were conducted to evaluate the effect of aging on the mechanochemical efficiency of the Mn-oxide birnessite in degrading pentachlorophenol (PCP). A comparative study on an aged birnessite (KBiA), used after 3 years from synthesis, and a fresh birnessite (KBiF), employed immediately after synthesis, was carried out. The differences between the two birnessites, evidenced by spectroscopic and diffractometric techniques, are mainly relative to reduction of the Mn(IV) centered at the MnO₆ octahedra layers from the birnessite structure, which represent the most reactive sites for PCP degradation. The long term air drying at room temperature, by favouring reduction of Mn(IV) to Mn(III), produces an inorganic substrate that offers paucity of the less reactive sites for PCP degradation, thus reducing the oxidative potential of the KBiA. Accordingly, the more reactive fresh birnessite was employed in the experiment with a polluted soil. Adding a small amount of KBiF to soil only induces a light increase in PCP removal, probably due to the mechanically induced PCP adsorption and transformation onto clay minerals present in the soil. Besides, adding a higher dose of birnessite causes a stronger degradation of PCP.     

Phytoremediation of 2,4-dichlorophenol using wild type and transgenic tobacco plants

Introduction

Transgenic plant strategies based on peroxidase expression or overexpression would be useful for phenolic compound removal since these enzymes play an important role in phenolic polymerizing reactions.

Material and methods

Thus, double transgenic (DT) plants for basic peroxidases were obtained and characterized in order to compare the tolerance and efficiency for 2,4-dichlorophenol (2,4-DCP) removal with WT and simple transgenic plants expressing TPX1 or TPX2 gene. Several DT plants showed the expression of both transgenes and proteins, as well as increased peroxidase activity.

Results

DT lines showed higher tolerance to 2,4-DCP at early stage of development since their germination index was higher than that of WT seedlings exposed to 25?mg/L of the pollutant. High 2,4-DCP removal efficiencies were found for WT tobacco plants. TPX1 transgenic plants and DT (line d) reached slightly higher removal efficiencies for 10?mg/L of 2,4-DCP than WT plants, while DT plants (line A) showed the highest removal efficiencies (98%). These plants showed an increase of 21% and 14% in 2,4-DCP removal efficiency for solutions containing 10 and 25?mg/L 2,4-DCP, respectively, compared with WT plants. In addition, an almost complete toxicity reduction of postremoval solutions using WT and DT plants was obtained through AMPHITOX test, which indicates that the 2,4-DCP degradation products would be similar for both plants.

Conclusion

These results are relevant in the field of phytoremediation application and, moreover, they highlight the safety of using DT tobacco plants because nontoxic products were formed after an efficient 2,4-DCP removal.