The AVI project: A bibliographical and archive inventory of landslides and floods in Italy

The AVI project was commissioned by the Minister of Civil Protection to the National Group for Prevention of Hydrogeologic Hazards to complete an inventory of areas historically affected by landslides and floods in Italy. More than 300 people, divided into 15 research teams and two support groups, worked for one year on the project. Twenty-two journals were systematically searched for the period 1918–1990, 350,000 newspaper issues were screened, and 39,953 articles were collected. About 150 experts on mass movement and floods were interviewed and 1482 published and unpublished technical and scientific reports were reviewed. The results of the AVI project, in spite of the limitations, represent the most comprehensive archiving of mass movement and floods ever prepared in Italy. The type and quality of the information collected and the methodologies and techniques used to make the inventory are discussed. Possible applications and future developments are also presented.     

Life cycle assessment of a domestic cooker hood

A life cycle assessment (LCA) of a domestic cooker hood was conducted. Cradle-to-grave analysis was performed using the GaBi software with Eco-Indicator 99 (Egalitarian Approach). The most polluting phases were “manufacturing” and “use”, the environmental impact being affected especially by production materials and the electricity consumed during the product’s lifespan. The study also highlighted that the hood’s environmental impact is closely related to the local power grid mix. This aspect was further analyzed by entering the data for operating it both in Italy and in France. Finally, the improvements obtained by replacing the single-phase electrical motor with an inverter-driven three-phase induction one and the halogen lamps with Light Emitting Diode (LED) lamps were assessed with the LCA. These changes entail an improvement of the environmental impact of 36% in Italy and of 24% in France.     

Assessment of the environmental conditions of the Sarno river basin (south Italy): a stream sediment approach

The Sarno river basin covers an area of 500 km² collecting the waters of Solofrana and Cavaiola tributaries. Originally it manly represents a source of livelihood for inhabitants by fishing and transporting goods; currently, the Sarno river, still partially used for irrigation, is affected by an extreme environmental degradation as a result of uncontrolled outflow of industrial waste. Within the framework of a wider geochemical prospecting project aiming at characterizing the whole territory of the Campania region, 89 stream sediment samples with a sampling density of 1 sample per 5 km² were collected in the river basin and analyzed by means of inductively coupled plasma-mass spectrometry in order to assess the environmental conditions at a regional scale. A GIS-aided technique, based on both the actual distribution of potentially harmful elements and their regional background values, was used to generate the maps of the contamination factors and of the contamination degrees for As, Cd, Cr, Cu, Hg, Pb and Zn. Furthermore, a factor analysis was performed to assess the nature and the extent of contamination sources for the river sediments. Results showed that the Sarno river basin could be divided in two “environmental status” units: one, low contaminated, corresponding to the hilly and mountain areas, and the second, from moderately to very highly contaminated, corresponding to the economically developed areas of the valley floor characterized by a high population density. This work was developed within a project that aims to investigate the relationships between environmental pollution and human health by analyzing environmental media (stream sediments, water, soil and vegetation) together with human hair of resident population. In this context, the spatial correlation between the extremely compromised environmental conditions of developed areas and the incidence rate of liver cancer in the same area was also explored posing the need of a careful costs/benefits analysis to assess whether the deterioration of the environment, that could adversely affect the conditions of public health, is worth the economic development.     

Assessment of the Water Quality of the River Arno in the Area of Florence, Italy

The quality of the waters collected from R. Arno was examined in the period September 1988 to December 1989. A first campaign in September/October 1988, during a period of low water, gives a general picture of pollution conditions along the river from the source to the mouth. the river appears to be heavily polluted immediately downstream of Florence and in the area of the textile industry.

In the second campaign, through the whole year 1989, particular attention has been given to the Florence area; the most significant results, compared with those from a previous investigation carried out in 1971, show only a small reduction of the pollution load, due to the shortage and inadequacy of wastewater depuration. Some considerations are reported on pollution drop with full spate.     

Mesoscale variability related to iron speciation in a coastal Ross Sea area (Antarctica) during summer 2014

Dissolved iron (Fe) distribution and speciation was determined in water samples (0–200?m) collected in a coastal area near Terra Nova Bay during the austral summer of 2014. Nutrients, dissolved oxygen, chlorophyll-a, phytoplankton composition and prokaryotic biomass distribution were investigated in combination with measurements of the physical properties of the water columns and its dynamics. The dFe value was above the limiting growth concentration, ranging from 0.52 to 4.51?nM, and it showed a spatial variability with a horizontal length scale of about 10?km, according to the variability of the water column physical properties and to iron sources. The organic ligands (L) maintained the concentrations of dFe at levels much higher than the inorganic solubility of Fe, keeping it available for phytoplankton and the log K’_FeL values found (from 22.1 to 23.6) highlighted the presence of complexes of differing stabilities.     

Retention of arsenic on hydrous ferric oxides generated by electrochemical peroxidation

Electrochemical peroxidation (ECP), an emerging remediation technology, with direct electric current applied to steel electrode and small addition of H2O2, was used to remove As(III) from contaminated aqueous solutions. Bench scale experiments were conducted to evaluate the sorption and distribution of arsenic between the soluble and solid state hydrous ferric oxides (HFO) formed as part of the ECP process. ECP was effective in removing arsenic from the aqueous solution, with >98% of the applied As(III) adsorbed on HFO. Removal was complete within 3 min of ECP treatment and apparently independent of the initial pH of the water (3.5-9.5). In the absence of H2O2 more As(III) was adsorbed by solid state iron at pH 9.5 than at 3.5 (2600 vs. 1750 microg l(-1)). Thus H2O2 was crucial to oxidize As(III) to As(V) which is more strongly retained by HFO. Removal of As was not significantly affected by the concentration of H2O2 or by current processing time. The optimal operating conditions were pH < 6.5, H2O2 concentration of 10 mg l(-1) and current process time not exceeding 3 min. X-ray diffraction (XRD), diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy and transmission electron microscopy (TEM) were applied to study the HFO deposits. The XRD data indicated the prevalence of poorly ordered Fe minerals in the suspended ECP solids with a dominance of 5 line ferrihydrite in the absence of H2O2. At pH 3.5 and with 100 mg H2O2 l(-1), akaganeite was formed, whereas an incipient hematitic phase, reflection at 0.39 nm, occurred at pH 6.5. DRIFT data indicate that both As(III) and As(V) were specifically adsorbed onto HFO at acid and neutral pH. TEM observations indicated the presence of spherical shape ferrihydrite and provided evidence for possible formation of subrounded hematite and acicular shape goethite.     

Error Assessment for Height Above the Nearest Drainage Inundation Mapping

Real‐time flood inundation mapping is vital for emergency response to help protect life and property. Inundation mapping transforms rainfall forecasts into meaningful spatial information that can be utilized before, during, and after disasters. While inundation mapping has traditionally been conducted on a local scale, automated algorithms using topography data can be utilized to efficiently produce flood maps across the continental scale. The Height Above the Nearest Drainage method can be used in conjunction with synthetic rating curves (SRCs) to produce inundation maps, but the performance of these inundation maps needs to be assessed. Here we assess the accuracy of the SRCs and calculate statistics for comparing the SRCs to rating curves obtained from hydrodynamic models calibrated against observed stage heights. We find SRCs are accurate enough for large‐scale approximate inundation mapping while not as accurate when assessing individual reaches or cross sections. We investigate the effect of terrain and channel characteristics and observe reach length and slope predict divergence between the two types of rating curves, and SRCs perform poorly for short reaches with extreme slope values. We propose an approach to recalculate the slope in Manning’s equation as the weighted average over a minimum distance and assess accuracy for a range of moving window lengths.