Estimation of uncertainty arising from different soil sampling devices: the use of variogram parameters

In the frame of the international SOILSAMP project, funded and coordinated by the National Environmental Protection Agency of Italy (APAT), uncertainties due to field soil sampling were assessed. Three different sampling devices were applied in an agricultural area using the same sampling protocol. Cr, Sc and Zn mass fractions in the collected soil samples were measured by k(0)-instrumental neutron activation analysis (k(0)-INAA). For each element-device combination the experimental variograms were calculated using geostatistical tools. The variogram parameters were used to estimate the standard uncertainty arising from sampling. The sampling component represents the dominant contribution of the measurement uncertainty with a sampling uncertainty to measurement uncertainty ratio ranging between 0.6 and 0.9. The approach based on the use of variogram parameters leads to uncertainty values of the sampling component in agreement with those estimated by replicate sampling approach.     

Effect of modified Fenton treatment on the thermal behavior of contaminated harbor sediments

This study presents the results of experimental Fenton-like treatments conducted on marine sediment slurries (2g sediment vs. 20 ml liquid). The sediment was collected in a harbor situated in a high density industrial area, characterized by a great hydrocarbon C>12 and PAHs contamination. The investigated parameters were: the H(2)O(2) dose, the reagent's pH and the effect of a phosphate salt and ferrous iron addition. To evaluate sediment's characteristics COD, particle size, thermogravimetric and differential thermal analyses were performed under N(2) and O(2) atmosphere while dissolved organic carbon and COD analyses were performed on the filtrate. Results indicate that the treatment was able to change the organic matter to a less hydrophobic state, to destroy part of the organic carbon (up to 78% decrease of the 200-400 degrees C labile organic matter), to lower the COD of the sediment (60% COD removal maximum) and to increase the cumulated distribution undersize. In addition as the treated sediment showed easier-to-handle characteristics, reduced caking and lower aggregation capacity, the modified Fenton treatment could also be considered a pre-treatment of a successive thermal treatment.     

Comparative study based on sediment characteristics and macrobenthic communities in two Italian lagoons

The aims of this study were to analyse sediment characteristics and macrobenthic assemblages in two very close Italian coastal lagoons (Lesina and Varano) and to assess the different behaviour between the two basins and the relationship between sediment matrix and benthic organisms within and between the two lagoons. The comparative study was performed in July 2007 at 13 sampling sites in Lesina lagoon and 15 sites in Varano basin for sediment grain size, total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP) and macrobenthic structure analyses. Both lagoons were generally dominated by fine-grained sediments (clay and silt components). The average contents of TOC and TN measured in Lesina was higher than in Varano (3.31% vs 2.52% for TOC and 5,200 μg·g^???1 vs 3,713 μg·g^???1 for TN); in contrast, the TP was lower (540 μg·g^???1 vs 620 μg·g^???1). Based on macrobenthic community patterns, the central zone in Varano lagoon and the eastern area in Lesina lagoon were characterised by the lowest abundance (168.7 ind·m^???2 and 503.2 ind·m^???2, respectively) and by the lowest number of species, as highlighted by the diversity indices (Shannon–Wiener, H ^′ range was 0.47–1.45 for Lesina and 0.00–1.68 for Varano; Margalef species richness, d range was 0.00–1.67 for Lesina lagoon and 0.00–2.38 for Varano basin). Ordination diagrams suggested an influence of marine and freshwater inputs on the sediment distribution in Varano lagoon and on macrobenthic assemblages in Lesina lagoon.     

Land use and land cover (LULC) of the Republic of the Maldives: first national map and LULC change analysis using remote-sensing data

The Maldives islands in recent decades have experienced dramatic land-use change. Uninhabited islands were turned into new resort islands; evergreen tropical forests were cut, to be replaced by fields and new built-up areas. All these changes happened without a proper monitoring and urban planning strategy from the Maldivian government due to the lack of national land-use and land-cover (LULC) data. This study aimed to realize the first land-use map of the entire Maldives archipelago and to detect land-use and land-cover change (LULCC) using high-resolution satellite images and socioeconomic data. Due to the peculiar geographic and environmental features of the archipelago, the land-use map was obtained by visual interpretation and manual digitization of land-use patches. The images used, dated 2011, were obtained from Digital Globe’s WorldView 1 and WorldView 2 satellites. Nine land-use classes and 18 subclasses were identified and mapped. During a field survey, ground control points were collected to test the geographic and thematic accuracy of the land-use map. The final product’s overall accuracy was 85%. Once the accuracy of the map had been checked, LULCC maps were created using images from the early 2000s derived from Google Earth historical imagery. Post-classification comparison of the classified maps showed that growth of built-up and agricultural areas resulted in decreases in forest land and shrubland. The LULCC maps also revealed an increase in land reclamation inside lagoons near inhabited islands, resulting in environmental impacts on fragile reef habitat. The LULC map of the Republic of the Maldives produced in this study can be used by government authorities to make sustainable land-use planning decisions and to provide better management of land use and land cover.     

Modelling Tracer Dispersion from Landfills

Several wind tunnel experiments of tracer dispersion from reduced-scale landfill models are presented in this paper. Different experimental set-ups, hot-wire anemometry, particle image velocimetry and tracer concentration measurements were used for the characterisation of flow and dispersion phenomena nearby the models. The main aim of these experiments is to build an extensive experimental data set useful for model validation purposes. To demonstrate the potentiality of the experimental data set, a validation exercise on several mathematical models was performed by means of a statistical technique. The experiments highlighted an increase in pollutant ground level concentrations immediately downwind from the landfill because of induced turbulence and mean flow deflection. This phenomenon turns out to be predominant for the dispersion process. Tests with a different set-up showed an important dependence of the dispersion phenomena from the landfill height and highlighted how complex orographic conditions downwind of the landfill do not affect significantly the dispersion behaviour. Validation exercises were useful for model calibration, improving code reliability, as well as evaluating performances. The Van Ulden model proved to give the most encouraging results.     

Generation of PCDD/F in fly ash from municipal solid waste incinerators

Fly ash from municipal solid waste incinerators (MSWIs) has been characterized in terms of polychlorinated dibenzyl-p-dioxin and polychlorinated dibenzofuran (PCDD/F) content. Increasing values of PCDD/Fs have been found to correlate with decreasing temperatures of sampling points in flue gas treatment lines of the plants, confirming other researchers' findings about temperature as the major controlling parameter for the PCDD/F formation. Measured PCDD/F ratios show that de novo synthesis is the dominant formation mechanism. The increasing trends of particulate-bound PCDD/Fs can be explained not only through the dominant de novo synthesis process but also considering the adsorption of gaseous PCDD/Fs on fly ash deposits, even outside the typical de novo synthesis temperature ranges. The effective role of a post-combustor unit, imposed by Italian law to destroy PCDD/ Fs, also needs to be carefully reconsidered.     

A model of area fidelity,nomadism, and distribution patterns of loggerhead sea turtles (<Emphasis Type="Italic">Caretta caretta</Emphasis>) in the Mediterranean Sea

Sea turtle tagging carried out in Italy in the period 1981–2006 resulted in 125 re-encounters of loggerhead turtles (Caretta caretta) after a mean of 2.5 years, from different marine areas in the Mediterranean. At first finding, turtles ranged 25–83 cm of curved carapace length. Data were analyzed according to size, area, habitat type, season, in order to provide indication of movement patterns. When integrated with other information, results indicate that: (1) a part of turtles in the oceanic stage show a nomad behavior with movements among different oceanic areas; (2) another part show fidelity to an oceanic area; (3) turtles in the neritic stage show fidelity to neritic areas, and once settled to one area, change to other neritic areas is unlikely; (4) nomad oceanic turtles are significantly larger than sedentary ones, and also larger than turtles found in neritic areas; it is hypothesized that these could be Atlantic turtles that eventually leave the Mediterranean; (5) ecological transition from oceanic to neritic habitats occurs at a wide range of sizes, and some turtles may have a very brief oceanic stage; (6) turtles in the oceanic stage are more likely to recruit to neritic areas close to their oceanic areas than to distant ones; (7) part of turtles from some Mediterranean nesting beaches might frequent a relatively limited area range, including both oceanic and neritic areas; (8) in most of the Mediterranean, latitudinal seasonal migrations are unlikely. A general model of movement patterns of loggerhead turtles in the Mediterranean is proposed.     

Biological benthic tools as indicators of coastal marine ecosystems health

Coastal marine ecosystems are increasingly subjected to environmental stress and degradation due to pollution. Several research programmes have addressed this problem and produced relevant data sets for specific areas, often including consistent sets of environmental and biological variables. The value of existing information gathered from these types of data can be largely increased by combining them into a common data set to determine globally applicable relationships. To perform this exercise, the Intergovernmental Oceanographic Commission (IOC) of UNESCO has recently formed the Ad hoc Study Group on Benthic Indicators (http://www.ioc.unesco.org/benthicindicators) with the aim of developing robust indicators of benthic health. In this paper, initial products and ongoing activities of this international initiative are described and discussed. An expansion of initial IOC/UNESCO research on benthic fauna-organic carbon relationships is also presented. As part of this follow-up research, the relationship between total organic carbon concentrations of sediment and abundance, biomass and species diversity of benthic macrofauna was evaluated using data sets from 2 different regions of the world comprising 3 different coastal marine environments. The ability of identifying threshold levels in selected variables that could serve as indicators of related adverse environmental conditions leading to stress in the benthos is envisaged within the frame of a larger joint analysis, carried out by the IOC/UNESCO Study Group on Benthic Indicators, of merged data sets from several coastal regions worldwide.