High rate mesophilic, thermophilic, and temperature phased anaerobic digestion of waste activated sludge: a pilot scale study

The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35°C), thermophilic (55°C) and temperature phased (65+55°C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m(3)d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m(3)/kgVS(fed) at 35, 55, and 65+55°C, respectively. The extreme thermophilic reactor working at 65°C showed a high hydrolytic capability and a specific yield of 0.33 g COD (soluble) per gVS(fed). The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor.     

Separation of plastic waste via the hydraulic separator Multidune under different geometric configurations

The recovery of high-quality plastic materials is becoming an increasingly challenging issue for the recycling sector. Technologies for plastic recycling have to guarantee high-quality secondary raw material, complying with specific standards, for use in industrial applications. The variability in waste plastics does not always correspond to evident differences in physical characteristics, making traditional methodologies ineffective for plastic separation. The Multidune separator is a hydraulic channel allowing the sorting of solid particles on the basis of differential transport mechanisms by generating particular fluid dynamic conditions due to its geometric configuration and operational settings. In this paper, the fluid dynamic conditions were investigated by an image analysis technique, allowing the reconstruction of velocity fields generated inside the Multidune, considering two different geometric configurations of the device, Configuration A and Configuration B. Furthermore, tests on mono- and bi-material samples were completed with varying operational conditions under both configurations. In both series of experiments, the bi-material samples were composed of differing proportions (85% vs. 15%) to simulate real conditions in an industrial plant for the purifying of a useful fraction from a contaminating fraction. The separation results were evaluated in terms of grade and recovery of the useful fraction.     

An ecotoxicological view on neurotoxicity assessment

The numbers of potential neurotoxicants in the environment are raising and pose a great risk for humans and the environment. Currently neurotoxicity assessment is mostly performed to predict and prevent harm to human populations. Despite all the efforts invested in the last years in developing novel in vitro or in silico test systems, in vivo tests with rodents are still the only accepted test for neurotoxicity risk assessment in Europe. Despite an increasing number of reports of species showing altered behaviour, neurotoxicity assessment for species in the environment is not required and therefore mostly not performed. Considering the increasing numbers of environmental contaminants with potential neurotoxic potential, eco-neurotoxicity should be also considered in risk assessment. In order to do so novel test systems are needed that can cope with species differences within ecosystems. In the field, online-biomonitoring systems using behavioural information could be used to detect neurotoxic effects and effect-directed analyses could be applied to identify the neurotoxicants causing the effect. Additionally, toxic pressure calculations in combination with mixture modelling could use environmental chemical monitoring data to predict adverse effects and prioritize pollutants for laboratory testing. Cheminformatics based on computational toxicological data from in vitro and in vivo studies could help to identify potential neurotoxicants. An array of in vitro assays covering different modes of action could be applied to screen compounds for neurotoxicity. The selection of in vitro assays could be guided by AOPs relevant for eco-neurotoxicity. In order to be able to perform risk assessment for eco-neurotoxicity, methods need to focus on the most sensitive species in an ecosystem. A test battery using species from different trophic levels might be the best approach. To implement eco-neurotoxicity assessment into European risk assessment, cheminformatics and in vitro screening tests could be used as first approach to identify eco-neurotoxic pollutants. In a second step, a small species test battery could be applied to assess the risks of ecosystems.     

Food resource partitioning in a Mediterranean demersal fish assemblage: the effect of body size and niche width

We investigated the effects of body size, feeding strategy and depth distribution on the trophic resource partitioning among the 26 dominant fish consumers in a fish assemblage on the central Mediterranean shelf-break. The fish assemblage was structured in two major trophic guilds: epibenthic and zooplanktonic feeders, according to the position of each predator along the benthos–plankton gradient. Within each main guild, the species were segregated along a prey-size or fish-size gradient into five further guilds. Fish size and prey size were strongly correlated, indicating that the prey-size niche can be well explained by predator size. Fish consumers showed a significant negative correlation between the similarity in prey type and the similarity in depth distribution; most species with similar trophic preferences segregated along the depth dimension. The only predators overlapping in both food and depth preferences were those with a more specialist trophic behavior. These results suggest that fish body size and depth preferences are the two main niche dimensions, explaining a large part of the coexistence between the Mediterranean shelf-break fish consumers.     

Quantitative PCR to estimate copepod feeding

Copepods play a central role in marine food webs as grazers of plankton and as key prey for many predators. Therefore, quantifying their specific trophic interactions is critical for understanding the role of copepods in ocean processes. However, because of methodological constraints, it remains difficult to investigate in situ copepod feeding without reliance on laborious intrusive and potentially biased incubation approaches. Recent advances in PCR-based methodologies have demonstrated the feasibility of directly identifying copepod diets based on prey DNA sequences. Yet, obtaining quantitative information from these approaches remains challenging. This study presents results of systematic efforts to develop a quantitative PCR (qPCR) assay targeted to 18S rRNA gene fragments to estimate copepod gut content of specific species of prey algae. These results were first compared to gut content estimates based on fluorescence in the copepod Calanus finmarchicus fed monocultures of two different microalgae species in controlled laboratory studies. In subsequent field studies, we compared feeding rates obtained by microscopy and qPCR for Temora longicornis and Acartia clausi feeding on the haptophyte Phaeocystis globosa in natural blooms. These investigations demonstrate a semi-quantitative relationship between gut content estimates derived from qPCR, gut pigment, and direct microscopy. However, absolute estimates of gut content based on qPCR methodology were consistently lower than expected. This did not appear to be explained by the extraction methods used, or interference by non-target (predator) DNA in the PCR reactions, instead suggesting digestion of prey-specific nucleic acids. Furthermore, the 18S rDNA target gene copy number of the phytoplankton varied with growth phase. Nonetheless, when prey target gene copy number in the ambient water is quantified, the qPCR-approach can be compared to other methods, and then used to semi-quantitatively estimate relative copepod grazing on specific prey in situ without involving further incubations. A distinct advantage of a DNA-based molecular approach compared to gut fluorescence and direct microscopic observation, is the ability to detect non-pigmented and macerated prey. Future studies should aim to correct for breakdown in prey DNA and perform extensive calibrations to other methods in order to achieve a quantitative measure of feeding rates in situ.     

Environmental Pollution Due to Natural Factors: A Case Study in A Volcanic Area (Vulcano Island, Italy)

A major influence on the environment of active volcanic areas is expected from continuous input of chemical species pertaining to fumarolic activities occurring during inter-eruptive intervals.

The systematic investigations carried out during thirteen years in the island of Vulcano (Italy) showed also substantial contributions to phreatic waters and soils of minor constituents and trace metals from volcanic rocks with no negligible influence on growing crops.

Greater extents of these phenomena have been observed for products of hydromagmatic volcanic activity or of long-lasting weathering processes.     

Influence of allocation methods on the environmental performance of biorefinery products—A case study

Life Cycle Assessment (LCA) methodology is the prevailing framework for estimating the environmental performances of a product/service. The application of LCA frequently requires practitioners to address allocation issues, especially when a large number of co-products are produced. The choice of an allocation approach for multifunctional processes is among the most debated methodological aspects in the LCA community, given its potentially large influence on final outcomes. Despite numerous efforts, a uniform consensus on the best allocation practice is still lacking and no single method appears as the most suitable for all situations.The aim of this paper is to assess how different allocation methods affect the environmental performances of a lignocellulosic biorefinery. Biorefinery systems represent a good example of a multifunctional process, since they co-produce multiple energy and material products. The following allocation procedures are applied: system expansion (also named substitution method), partitioning method according to different features of co-products (mass, energy, exergy and economic value), and hybrid approach (given by a combination of the previous ones). In order to enhance the clarity of the discussion, a mathematical notation for these allocation procedures is adopted, and analytical interrelations are investigated. Results show the influence of the allocation methods on the environmental impacts assigned to the individual products, both on a unit and annual flow basis.     

On the quantitative distribution and community structure of the meio and macrofaunal communities in the coastal area of the Central Adriatic Sea (Italy)

Many coastal areas have served as repositories of different anthropogenic and naturally induced organic material and nutrients. The major sources thereof are riverine inputs which strongly influence the spatial and temporal distribution of benthic communities. In this study, the benthic foraminiferal, meiofaunal, and macrofaunal colonies in front of three rivers in a poorly known, but environmentally valuable, area of the Central Adriatic Sea have been examined concurrently. The physico-chemical parameters of bottom water and sediment characteristics were determined in order to characterize both the sediment-water interface and the benthic environments. Although changes in the biota are neither univocal nor unidirectional, a moderate influence of riverine input on the different communities' components can be inferred. The most affected taxa are foraminifera and copepods and, to a lesser extent, meiofaunal polychaetes and platyhelminthes. These results are also tested by the ABC curves, which reveal that the macrofaunal communities closest to the river mouths are moderately disturbed. This integrated investigation documents, for the first time, how benthic communities can be used as an early warning indicator with which to monitor the health quality of a coastal ecosystem.     

Environmental comparison of draught animal and tractor power

The environmental impacts of moving to different traction power sources have not been well studied in either developing countries or modern agriculture. This study assesses the environmental impact of the transition from animal to tractor power and vice versa. Three different scenarios are analyzed: a developing country context where draught animal power (DAP) is actually in use; a similar context where DAP is replaced by mechanical traction; and a developed country scenario where mechanical traction is replaced by DAP. The impact assessment focuses on global warming (GW) and primary energy consumption (PEC). The DAP system refers to an Indonesian case study where Peranakan Ongole cattle are used for work, together with the production of milk and meat, and fed with two forage-supplying alternatives. The mechanical traction system considers the cases of a two-wheel tractor (2WT) and a rear-wheel-drive tractor (4WT). In the first scenario, assessing DAP impacts for plowing through process subdivision and indirect impacts allocation to co-products, DAP has a consistent advantage regarding energy consumption, while for CO₂eq emissions, performance is better only in the case of 2WT. In the second scenario, considering product equivalent systems, substituting DAP with tractor power and maintaining the same DAP livestock farming more than doubles the impact; only with the introduction of modern, specialized livestock farming is a reduction achieved. In the third scenario, replacing mechanical traction with DAP results in a greater than three-fold increase in impact for PEC and more than 17 times increase for GW. Further work on the influence of system definition and the socio-economic background would improve the estimates produced in this study.