Effect of the Mn oxidation state and lattice oxygen in Mn-based TiO2 catalysts on the low-temperature selective catalytic reduction of NO by NH3

TiO₂-supported manganese oxide catalysts formed using different calcination temperatures were prepared by using the wet-impregnation method and were investigated for their activity in the low-temperature selective catalytic reduction (SCR) of NO by NH₃ with respect to the Mn valence and lattice oxygen behavior. The surface and bulk properties of these catalysts were examined using Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), temperature-programmed reduction (TPR), and temperature-programmed desorption (TPD). Catalysts prepared using lower calcination temperatures, which contained Mn⁴⁺, displayed high SCR activity at low temperatures and possessed several acid sites and active oxygen. The TPD analysis determined that the Brönsted and Lewis acid sites in the Mn/TiO₂ catalysts were important for the low-temperature SCR at 80～160 and 200～350 °C, respectively. In addition, the available lattice oxygen was important for attaining high NO to NO₂ oxidation at low temperatures.

Implications: Recently, various Mn catalysts have been evaluated as SCR catalysts. However, there have been no studies on the relationship of adsorption and desorption properties and behavior of lattice oxygen according to the valence state for manganese oxides (MnO_x). Therefore, in this study, the catalysts were prepared by the wet-impregnation method at different calcination temperatures in order to show the difference of manganese oxidation state. These catalysts were then characterized using various physicochemical techniques, including BET, XRD, TPR, and TPD, to understand the structure, oxidation state, redox properties, and adsorption and desorption properties of the Mn/TiO₂ catalysts.     

The behaviors of H2, CH4, C2H4 and C3H6 from the decomposition of polypropylene by NiO/Si–Al catalyst

The purpose of this study was to investigate the possibility of light gases produced from polypropylene, specifically hydrogen. In particular, we examined the effect of operating conditions on gaseous product and compositions in the catalytic cracking of polypropylene. We also characterized the gaseous product generated from polypropylene cracking. The feedstock (2.0 g) mixed with NiO/SiO₂–Al₂O₃ (Si–Al) was used, under non-isothermal conditions at low temperature range between 380 and 500 °C. Argon gas was used to carry the pyrolyzed gas, and the gas collected in a tedlar bag was analyzed for its behavior. We observed the behavior of major gases (H₂, CH₄, C₂H₄ and C₃H₆, etc.) according to reaction time and temperature. Finally, the effect of reaction conditions on evolved gases from catalytic cracking of polypropylene was analyzed.     

Development and Application of Green Composites: Using Coffee Ground and Bamboo Flour

Environmental degradation and global warming are increasing as a result of the use of petroleum. Therefore, many industries are seeking more eco-friendly materials that will decrease the level of environmental contamination and economic cost. Recently, the level of coffee consumption has increased rapidly. Therefore, the amount of coffee grounds discarded is increasing. In this study, polylactic acid, coffee grounds and bamboo flour were compounded for green composites. Coffee grounds are used in the recycling of food waste. In addition, 4,4-methylene diphenyl diisocyanate (MDI) was used as a coupling agent. The mechanical strength of green composites decreased with increasing natural filler content. However, mechanical and thermal properties were increased by the addition of MDI as a coupling agent. The hydroxyl groups of natural fillers reacted with the isocyanate group of MDI, and a urethane linkage was created between the polymer and natural fillers.     

The subchronic toxicity of acridine in the rat

Abstract

The subchronic toxicity of acridine was investigated in rats following dietary exposure at 0, 1, 10, 100 and 500 ppm for 13 weeks. The growth rate and food consumption were not affected by treatment and no clinical signs of toxicity were observed. There was a slight but significant decrease in spleen weight, both in absolute terms and as a percent of body weight, in the 500 ppm males and a slight increase in absolute thymus weight in the females of the same dose group. Both hepatic ethoxyresorufin O‐deethylase (EROD) and pentoxyresorufin O‐dealkylase (PROD) activities were slightly, but significantly, elevated in females in the 500 ppm dose group. No haematological or other biochemical changes were observed. Females also displayed dose‐related increases in inorganic phosphate and uric acid levels. Treatment‐related histopathological changes were seen in the thyroid, liver and kidney and included hepatic anisokaryosis and vesiculation of nuclei and glomerular adhesions, reticulin sclerosis and nuclear pyknosis in the kidney. Residue data showed a dose‐dependent accumulation of acridine in liver, kidney and adipose with the highest concentration being found in the fat of the 500 ppm dose group. Based on these data, the no observable adverse effect level of acridine was judged to be 100 ppm or 12 mg/kg bw/day.     

Immobilization of lead in contaminated firing range soil using biochar

Soybean stover-derived biochar was used to immobilize lead (Pb) in military firing range soil at a mass application rate of 0 to 20 wt.% and a curing period of 7 days. The toxicity characteristic leaching procedure (TCLP) was performed to evaluate the effectiveness of the treatment. The mechanism responsible for Pb immobilization in military firing range soil was evaluated by scanning electron microscopy-energy dispersive x-ray spectroscopy (SEM-EDX) and x-ray absorption fine structure (XAFS) spectroscopy analyses. The treatment results showed that TCLP Pb leachability decreased with increasing biochar content. A reduction of over 90 % in Pb leachability was achieved upon treatment with 20 wt.% soybean stover-derived biochar. SEM-EDX, elemental dot mapping and XAFS results in conjunction with TCLP leachability revealed that effective Pb immobilization was probably associated with the pozzolanic reaction products, chloropyromorphite and Pb-phosphate. The results of this study demonstrated that soybean stover-derived biochar was effective in immobilizing Pb in contaminated firing range soil.     

Comparisons of polybrominated diphenyl ethers levels in paired South Korean cord blood, maternal blood, and breast milk samples

Polybrominated diphenyl ethers (PBDEs), commonly used flame retardants, have been reported as potential endocrine disruptor and neurodevelopmental toxicants, thus giving rise to the public health concern. The goal of this study was to investigate the relationship between umbilical cord blood, maternal blood, and breast milk concentrations of PBDEs in South Korean. We assessed PBDE levels in paired samples of umbilical cord blood, maternal blood, and breast milk. The levels of seven PBDE congeners were measured in 21 paired samples collected from the Cheil Woman’s Hospital (Seoul, Korea) in 2008. We also measured thyroid hormones levels in maternal and cord blood to assess the association between PBDEs exposure and thyroid hormone levels. However, there was no correlation between serum thyroxin (T4) and total PBDEs concentrations. The total PBDEs concentrations in the umbilical cord blood, maternal blood, and breast milk were 10.7 ± 5.1 ng g⁻¹ lipid, 7.7 ± 4.2 ng g⁻¹ lipid, and 3.0 ± 1.8 ng g⁻¹ lipid, respectively. The ranges of total PBDE concentrations observed were 2.28-30.94 ng g⁻¹ lipid in umbilical cord blood, 1.8-17.66 ng g⁻¹ lipid in maternal blood, and 1.08-8.66 ng g⁻¹ lipid in breast milk. BDE-47 (45-73% of total PBDEs) was observed to be present dominantly in all samples, followed by BDE-153. A strong correlation was found for major BDE-congeners between breast milk and cord blood or maternal blood and cord blood samples. The measurement of PBDEs concentrations in maternal blood or breast milk may help to determine the concentration of PBDEs in infant.     

Study on the initial velocity distribution of exhaled air from coughing and speaking

Increasing concerns about the spread of airborne pathogens such as severe acute respiratory syndrome (SARS) and novel swine-origin influenza A (H1N1) have attracted public attention to bioaerosols and protection against them. The airborne pathogens are likely to be expelled from coughing or speaking, so the physical data of the exhaled particles plays a key role in analyzing the pathway of airborne viruses. The objective of this study was to analyze the initial velocity and the angle of the exhaled airflow from coughing and speaking of 17 males and 9 females using Particle Image Velocimetry (PIV) and acrylic indoor chamber. The results showed that the average initial coughing velocity was 15.3 m/s for the males and 10.6 m/s for the females, while the average initial speaking velocity was 4.07 m/s and 2.31 m/s respectively. The angle of the exhaled air from coughing was around 38° for the males and 32° for the females, while that of the exhaled air from speaking was around 49° and 78° respectively. Also, the linear relation between the tested subject’s height and their coughing and speaking velocity was shown in this study.     

Assessment of the daily intake of 62 polychlorinated biphenyls from dietary exposure in South Korea

The dietary intake of polychlorinated biphenyls (PCBs) was estimated using the sum of 62 PCB congeners (∑₆₂PCBs), including seven indicator PCBs and 12 dioxin-like PCBs, in the South Korea. In this study, 200 individual food samples belonging to 40 different foodstuffs were investigated to estimate the distribution of PCB congeners in five sampling cities. PCB exposure was estimated using Korean dietary habits as established by the National Health and Nutrition Examination Survey (NHANES). The PCB concentrations in rice, the most frequently consumed food in Korea, was relatively low in whole food samples. The mean PCB levels measured in fish were the highest in this study, but each fish is consumed in relatively small amounts by the general population. Therefore, the daily dietary intake should also be considered with regard to human exposure to PCBs, especially with the consumption of contaminated foods. Dioxin-like PCB levels were also calculated using TEF values that were established in 2005. The average levels (pg TEQ/g) were 0.0002 for rice and 0.0098 for fish. The dioxin-like PCBs accounted for a relatively small percentage of the total PCBs, compared to previous studies. According to our research, the health risks associated with exposure to PCBs could be estimated using the tolerable daily intake (TDI) of the general population.     

Electrochemical removal of nitrate using ZVI packed bed bipolar electrolytic cell

The present study investigates the performance of the zero valent iron (ZVI, Fe⁰) packed bed bipolar electrolytic cell for nitrate removal. The packing mixture consists of ZVI as electronically conducting material and silica sand as non-conducting material between main cathode and anode electrodes. In the continuous column experiments for the simulated groundwater (initial nitrate and electrical conductivity of about 30 mg L⁻¹ as N and 300 μS cm⁻¹, respectively), above 99% of nitrate was removed at the applied potential of 600 V with the main anode placed on the bottom of reactor. The influx nitrate was converted to ammonia (20% to maximum 60%) and nitrite (always less than 0.5 mg L⁻¹ as N in the effluent). The optimum packing ratio (v/v) of silica sand to ZVI was found to be 1:1-2:1. Magnetite was observed on the surface of the used ZVI as corrosion product. The reduction at the lower part of the reactor in acidic condition and adsorption at the upper part of the reactor in alkaline condition are the major mechanism of nitrate removal.