Comparative effectiveness of mixed organic substrates to mushroom compost for treatment of mine drainage in passive bioreactors

Bioreactors are one possible best sustainable technology to address the mine-impacted water problems. Several prospective substrates (mushroom compost, cow manure, sawdust, wood chips, and cut rice straw) were characterized for their ability to serve as a source of food and energy for sulfate-reducing bacteria. Twenty bench-scale batch bioreactors were then designed and set up to investigate relative effectiveness of various mixtures of substrates to that of mushroom compost, the most commonly used substrate in field bioreactors, for treating mine drainage with acidic (pH 3) and moderate pH (pH 6). Overall, reactive mixtures showed satisfactory performances in generating alkalinity, reducing sulfate and removing metals (Al>Fe>Mn) (up to 100%) at both pH conditions, for all substrates. The mixture of sawdust and cow manure was found as the most effective whereas the mixture containing 40% cut rice straw gave limited efficiency, suggesting organic carbon released from this substrate is not readily available for biodegradation under anaerobic conditions. The mushroom compost-based bioreactors released significant amount of sulfate, which may raise a more concern upon the start-up of field-scale bioreactors. The correlation between the extent of sulfate reduction and dissolved organic carbon/SO(4)(2-) ratio was weak and this indicates that the type of dissolved organic carbon plays a more important role in sulfate reduction than the absolute concentration and that the ratio is not sensitive enough to properly describe the relative effectiveness of substrate mixtures.     

Applicability of a sharp-interface model for estimating steady-state salinity at pumping wells--validation against sand tank experiments

A numerical sharp-interface model of saltwater and freshwater behavior was validated against experiments conducted in two small scale sand tanks. A simple algorithm was proposed to determine saltwater and freshwater withdrawal rates at a pumping well at which a total pumping rate was specified. Model estimates were compared with transient salinity breakthroughs and steady-state salinities of water extracted from pumping wells in the sand tanks. Experimental scenarios included various combinations of freshwater pumping and injection and saltwater pumping. The corresponding Nash-Sutcliffe model efficiency was 0.95, which showed that the agreement between observations and computed results was satisfactory.     

The estimation of N2O emissions from municipal solid waste incineration facilities: The Korea case

The greenhouse gases (GHGs) generated in municipal solid waste (MSW) incineration are carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O). In South Korea case, the total of GHGs from the waste incineration facilities has been increasing at an annual rate 10%. In these view, waste incineration facilities should consider to reduce GHG emissions.This study is designed to estimate the N₂O emission factors from MSW incineration plants, and calculate the N₂O emissions based on these factors. The three MSW incinerators examined in this study were either stoker or both stoker and rotary kiln facilities. The N₂O concentrations from the MSW incinerators were measured using gas chromatography-electron capture detection (GC-ECD) equipment.The average of the N₂O emission factors for the M01 plant, M02 plant, and M03 plant are 71, 75, and 153 g-N₂O/ton-waste, respectively. These results showed a significant difference from the default values of the intergovernmental panel on climate change (IPCC), while approaching those values derived in Japan and Germany. Furthermore, comparing the results of this study to the Korea Energy Economics Institute (KEEI) (2007) data on waste incineration, N₂O emissions from MSW incineration comprised 19% of the total N₂O emissions.     

Enhanced methane recovery by food waste leachate injection into a landfill in Korea

The current food waste leachate (FWL) disposal practice in Korea warrants urgent attention and necessary action to develop an innovative and sustainable disposal strategy, which is both environmentally friendly and economically beneficial. In this study, methane production by FWL injection into a municipal solid waste landfill with landfill gas (LFG) recovery facility was evaluated for a period of more than 4 months. With the target of recovering LFG with methane content ~50%, optimum LFG extraction rate was decided by a trial and error approach during the field investigation in five different phases. The results showed that, upon FWL injection, LFG extraction rate of ~20 m(3)/h was reasonable to recover LFG with methane content ~58%. Considering the estimated methane production potential of 31.7 m(3) CH(4) per ton of FWL, methane recovery from the landfill was enhanced by 14%. The scientific findings of this short-term investigation indicates that FWL can be injected into the existing sanitary landfills to tackle the present issue and such landfills with efficient liner and gas collection facility can be utilized as absolute and sustainable environmental infrastructures.     

Occurrence of perfluorooctanoate and perfluorooctanesulfonate in the Korean water system: implication to water intake exposure

Perfluorinated compounds (PFCs) measured in surface running waters indicated the existence of different emission sources in eight main city basins. The tap water reflected the contamination pattern and levels in their corresponding source water basins. The daily intakes through tap water consumption ranged from <0.01 to 0.73 ng kg⁻¹ d⁻¹ for perfluorooctanoate (PFOA) and <0.01 to 0.08 ng kg⁻¹ d⁻¹ for perfluorooctanesulfonate (PFOS). Tap water intake-derived exposure accounted for 8.6%-101% (for PFOA) and while <10% (for PFOS) of total daily exposure, which was estimated from Korean serum concentrations using a pharmacokinetic model. Our findings indicate that tap water intake could be an important contributor to PFOA exposure in Korean populations; accordingly, additional efforts are necessary to improve the removal efficiency of perfluorinated compounds (PFCs) in the water purification process. However, more fundamentally the aim would be to reduce the discharge of PFCs from potential sources within the basin.     

Concurrent sorption of antimony and lead by iron phosphate and its possible application for multi-oxyanion contaminated soil

Environmental Science and Pollution Research - Concurrent stabilization of oxyanions such as antimony (Sb), arsenic (As), and heavy metals including lead (Pb) and manganese (Mn) in contaminated...     

Environmentally sustainable applications of agro-based spent mushroom substrate (SMS): an overview

Agricultural wastes such as lignocellulosic residues are renewable resources can be used for mushroom cultivation. Spent mushroom substrate (SMS) is defined as leftover of biomass generated by commercial mushroom industries after harvesting period of mushroom. Mushroom cultivation using agricultural wastes promises a good quality of SMS for producing beneficial products such as animal feeding and fertilizers. Based on the published papers, the major applications of SMS are animal feedstock, fertilizer, energy production and wastewater treatment. For instance, some species of mushroom such as Pleurotus spp. and Agaricus bisporus are suitable for applications of ruminant feedstock and fertilizers. This paper reviews the recent studies about the beneficial usage of SMS which is considered as a waste since 2013.     

Case study in Korea of manufacturing SRF for polyurethanes recycling in e-wastes

Statistics showed that approximately 1,195,000 refrigerator units (116,094 metric tons) were recycled annually in Korea’s formal sector. Although the recycling level for these was satisfactory, collecting and processing polyurethane at recycling centers (RCs) posed several problems, including the risk of fire from the incinerator, the generation of fugitive dust, and the high cost of disposal. The objective of our study is to provide an overview of refrigerator recycling and to introduce polyurethane solid refuse fuel (SRF) manufacturing facilities. These facilities, installed at four regional RCs in Korea, have a capacity of 800 kg/h, a motor of 476 kWh, and cost $664,300 (USD) to construct (criteria two facilities). According to our examination of the physico-chemical properties of SRF product, all results in categories have been satisfied with the quality standards. In terms of finances, RCs can reduce the total disposal cost from $160–175 to $60 by installing facilities, which results in savings of (on average) $180,546 annually. The Metropolitan Electronics Recycling Center, for example, has reduced its costs by $180,880 each year. Their return on investment was calculated to be about 3 years and 8 months (assuming no operating expenses) or 7 years and 4 months (including operating expenses).     

Processing plastics from ASR/ESR waste: separation of poly vinyl chloride (PVC) by froth flotation after microwave-assisted surface modification

The feasibility of the selective surface hydrophilization of poly vinyl chloride (PVC) using microwave treatment to facilitate the separation of PVC via froth flotation from automobile shredder residue (ASR) and electronic waste shredder residue (ESR) was evaluated. In the presence of powder-activated carbon (PAC), 60-s microwave treatment selectively enhanced the hydrophilicity of the PVC surface (i.e., the PVC contact angle decreased from 86.8° to 69.9°). The scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) results are consistent with increased hydrophilic functional groups (i.e., ether, hydroxyl, and carboxyl), amounting to significant changes in the morphology and roughness of the PVC surface after treatment. After only 60 s of microwave treatment, 20 % of the PVC was separated in virgin and ASR/ESR plastics with 33 and 29 % purity, respectively, as settled fractions by froth flotation at a 150 rpm mixing speed. The microwave treatment with the addition of PAC had a synergetic effect with the froth flotation, which brought about 100 and 90 % selective separation of PVC from the other virgin and ASR/ESR plastics, with 91 and 82 % purity. The use of the combined froth flotation and microwave treatments is an effective technology for separating PVC from hazardous waste plastics.     

Passenger head kinematics in abrupt braking and lane change events

Abstract

Objective: A test track study was conducted to quantify patterns of adult front seat passenger head motion during abrupt vehicle maneuvers.

Method: Eighty-seven men and women with a wide range of body sizes and ages participated in data collection on a closed test track in a passenger sedan under manual control by a test driver. Because a primary goal of the study was to gather “unaware” data, the participants were instructed that the study was concerned with vehicle dynamics and they were required to read from a questionnaire taped to the top of their thighs as the drive began. The first event was a hard brake (approximately 1 g) to a stop from 35?mph (56 kph). Within the space of approximately 5?min the participants also experienced an aggressive lane change, a sharp right turn with simultaneous hard braking, and a second hard braking event. A Microsoft Kinect v2 sensor was positioned to view the area around the front passenger seat. Head location was tracked using the Kinect data with a novel methodology that fit 3D head scan data to the depth data acquired in the vehicle.

Result: The mean (standard deviation) forward excursion of the estimated head center of gravity (CG) location in the first braking event was 135 (62) mm. The forward head CG excursion in the second braking event of 115 (51) mm was significantly less than that in the first, but the difference was small relative to the within-condition variance. Head excursion on the second braking trial was less than that on the first trial for 69% of participants. The mean maximum inboard head excursion in lane-change maneuvers was 118 (40) mm. Forward head excursions in braking were significantly smaller for older passengers and those with higher body mass index, but the combined factors accounted for less than 25% of the variance. Inboard head excursion in the lane-change event was significantly related to stature, but only about 7% of variance was related to body size. Head excursions for men and women did not differ significantly after accounting for body size.

Discussion: This is the first quantitative occupant dynamics study to use a large, diverse sample of passengers, enabling the exploration of the effects of covariates such as age and body size.

Conclusions: The data demonstrate that a relatively large range of head positions can be expected to result from abrupt vehicle maneuvers. The data do not support simple scaling of excursions based on body size.