Euglena gracilis as a model for the study of Cu and Zn toxicity and accumulation in eukaryotic cells

We have observed the effect of copper and zinc on the biology of Euglena gracilis. The cells displayed different sensitivities to these metals, as the apparent LC₅₀ for Cu²⁺ was 0.22 mM, and for Zn²⁺ it was 0.88 mM. While Zn²⁺ was able to increase cell proliferation even at 0.1 mM, the minimal CuCl₂ concentration tested (0.02 mM) was sufficient to impair cell division. Higher concentrations of these metals not only inhibited cell division in a concentration-dependent manner, but also interfered with the metabolism of E. gracilis. A higher accumulation of proteins and lipids per cell was observed at the DI₅₀ concentration for metal-treated cells. These results suggest that the test concentration of both metals leads to a failure in completing cell division. Ultrastructural analysis indicated a chloroplast disorganization in copper-treated cells, as well as the presence of electron dense granules with different shapes and sizes inside vacuoles. Microanalysis of these granules indicated an accumulation of copper, thus suggesting a detoxification role played by the vacuoles. These results indicate that E. gracilis is an efficient biological model for the study of metal poisoning in eukaryotic cells. They also indicate that copper and zinc (copper being more poisonous) had an overall toxic effect on E. gracilis and that part of the effect can be ascribed to defects in the structure of chloroplast membranes.     

In vitro toxicity of selected pesticides on RTG-2 and RTL-W1 fish cell lines

The rainbow trout fish cell lines RTG-2 and RTL-W1 were used to determine the cytotoxic effects of the pesticides bifenthrin, cypermethrin, cyhalothrin, lambda-cyhalothrin, quinalphos and chlorpyrifos. Cytotoxicity was measured by EROD and beta-Gal enzymatic activities, the neutral red (NR) uptake assay, and the FRAME KB protein (KBP) assay. The beta-Gal activity was unaffected by the pesticide exposure. The EROD activity was induced by cyhalothrin and lambda-cyhalothrin (RTG-2 and RTL-W1) and by bifenthrin (RTL-W1). Dose dependent inhibition responses were observed for EROD activity in cells exposed to quinalphos (RTL-W1) and chlorpyrifos (RTG-2 and RTL-W1). RTL-W1 offered a better response for EROD induction. The EC50 values on EROD endpoint were more sensitive than NR and KBP. The acute fish toxicity of chlorpyrifos and quinalphos depends highly on the species; the species sensitivity distributions cover several orders of magnitude and the values obtained for EROS were within the lowest part of the reported ranges.     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.     

Wastes of multilayer containers as substrate in composting processes

An evaluation of the influence and degradation of ground multilayer containers, such as Tetra Brik Aseptic (TBA), in the composting process of municipal solid wastes (MSW) is presented. Two composting piles were formed by mixing, in different proportions, an organic fraction of MSW and TBA material ground as flakes or stripes. Piles were periodically aerated by mechanical mixing. Evolution of the composting was followed by frequent measurements of suitable parameters such as temperature, moisture, ashes, total organic carbon (TOC), nitrogen, C/N ratio, pH, conductivity, nutrients, and heavy metals. As expected, aluminum and polyethylene films from TBA were not degraded during the processes, but the cardboard fraction of TBA showed a partial decomposition that was more intense in the material ground as flakes. After two months of curing, the composts were refined and analyzed to determine their nutrient and heavy-metals contents. Despite their poor aesthetic properties, mainly resulting from the presence of little pieces of plastic and aluminum films, the composts contained the required amounts of nutrients; furthermore, their heavy-metals content was below the limits proposed by some official European organizations.     

Chemical fingerprinting applied to the evaluation of marine oil pollution in the coasts of Canary Islands (Spain)

Chemical fingerprinting approach to environmental assessment is illustrated in the evaluation of marine oil pollution in the coasts using two limpet species as bioindicator organisms, and based on profiles and concentrations of n-alkanes and aromatic hydrocarbons in their tissues. Accidental and chronic releases of hydrocarbons can contaminate the marine environment of the Canary Islands not only because of their geographical situation but also because of the very dense tanker traffic around. This situation affects coastal areas, fishing activities, tourism resort, etc. Concentrations of n-alkanes and aromatic hydrocarbons (polycyclic aromatic hydrocarbons and methyl-polycyclic aromatic hydrocarbons) in the soft tissues of the marine intertidal and subtidal limpets, Patella crenata and Patella ullysiponensis aspera, were evaluated. Limpet samples were collected at monthly intervals, at three locations on the southeast coast of Tenerife over a 3-year period (1991-93). Levels of hydrocarbons found in limpets are similar to concentrations found in unpolluted areas around the world. From application of principal component analysis, the interpretation of variable loading plots gives information on variable correlation and can be used to distinguish among potential sources of pollution and the ability of studied molluscs to be used as bioindicator organisms.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part II: electrochemical treatment of a spent regenerant solution.

The process of electrochemical treatment of a solution after strong basic anion exchanger regeneration was studied. The goal of the study was to reduce the nitrate content in the solution to allow its use in a closed loop. Diaphragmless, flow-through cells in a recirculation mode with and without a fluidizing bed of inert particles in the interelectrode space equipped with copper (Cu) cathodes and activated titanium anodes were used. The temperature was maintained at 20 degrees C. To assess the influence of recirculation of the regenerant solution on the quality of the treated water, the effect of the addition of copper ions to the solution, postelectrolysis cathode treatment, and enhanced mass transfer on the electrolysis results with respect to current efficiency and residual nitrate and nitrite concentration were investigated using an artificial solution. On the basis of the experimental results, a laboratory-scale unit for selective nitrate removal was designed and constructed that integrated ion exchange and electrochemical cell to one assembly. The process of recirculation of regenerant solution was tested using groundwater.     

The use of XAD-resins for the detection of mutagenic activity in water: I. Studies with surface water

A study of the effects of different XAD-resins, bed volume, flow rate, pH and type of eluent on the extraction of organic mutagens from surface water is presented. XAD-4/8 is as effective as XAD-2 in concentrating organic mutagens from surface water and dimethylsulfoxide (DMSO) is as efficient as acetone in eluting the adsorbed organic mutagens. The latter allows direct testing up to 0.5 ml of DMSO concentrate in the Ames test. Variation of the pH of the water after passing the XAD-4/8, followed by readsorption, shows that the majority of the mutagenic activity due to dissolved organics is adsorbed at neutral pH. Only a minor fraction is readsorbed at pH 3. Further a XAD-4/8 concentrate and a similar concentrate prepared by freeze drying gives similar mutagenic activity. This indicates that many of the organic mutagens are recovered in the XAD-4/8 concentrate.It is concluded that adsorption on XAD-4/8, followed by direct testing of the DMSO eluates in the Ames test, presents a rapid and relatively simple way to detect low concentrations of organic mutagens in surface water. The general suitability of the method is shown for different types of surface water.     

Modelling the environmental degradation of water contaminants. Kinetics and mechanism of the riboflavin-sensitised-photooxidation of phenolic compounds

The aerobic visible-light-photosensitised irradiation of methanolic solutions of either of the phenolic-type contaminants model compounds (ArOH) p-phenylphenol (PP), p-nitrophenol (NP) and phenol (Ph), and for two additional phenolic derivatives, namely p-chlorophenol (ClP) and p-methoxyphenol (MeOP), used in some experiments, was carried out. Employing the natural pigment riboflavin (Rf) as a sensitiser, the degradation of both the ArOH and the very sensitiser was observed. A complex mechanism, common for all the ArOH studied, operates. It involves superoxide radical anion (O₂^√−) and singlet molecular oxygen (O₂(¹Δ_g)) reactions. Maintaining Rf in sensitising concentrations levels (≈0.02 mM), the mechanism is highly dependent on the concentration of the ArOH. Kinetic experiments of oxygen and substrate consumption, static fluorescence, laser flash photolysis and time-resolved phosophorescence detection of O₂(¹Δ_g) demonstrate that at ArOH concentrations in the order of 10 mM, no chemical transformation occurs due to the complete quenching of Rf singlet excited state. When ArOH is present in concentrations in the order of mM or lower, O₂^√− is generated from the corresponding Rf radical anion, which is produced by electron transfer reaction from the ArOH to triplet excited Rf. The determined reaction rate constants for this step show a fairly good correlation with the electron-donor capabilities for Ph, PP, NP, ClP and MeOP. In this context, the main oxidative species is O₂^√−, since O₂(¹Δ_g) is quenched in an exclusive physical fashion by the ArOH. The production of O₂^√− regenerates Rf impeding the total degradation of the sensitiser. This kinetic scheme could partially model the fate of ArOH in aquatic media containing natural photosensitisers, under environmental conditions.     

Analysis of heavy metal distribution in superficial estuarine sediments (estuary of Bilbao, Basque Country) by open-focused microwave-assisted extraction and ICP-OES

Open-focused microwave-assisted extraction and ICP-OES determination of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn from surface sediments of the estuary of Bilbao (Basque Country, North of Spain) was carried out. All the samples were collected at three different tributaries of the estuary (Asua, Galindo and Nerbioi-Ibaizabal) every two months during 1999. The digestion procedure was proposed from the conclusions of a fractionated factorial design, and the precision and accuracy of the method was verified using a certified reference sediment (RTC008-050). The results of the analysis were statistically treated by means of principal component analysis and correlation analysis. The principal component analysis of sediment data (32 samples × 9 metals) indicated different patterns of contamination regarding the tributary and sampling station. The two main patterns observed were a steady increment of the metal concentration along all the campaigns in the samples collected in the Galindo River and a seasonal variation in the Nerbioi-Ibaizabal River, with higher metallic content during summertime and lower content during wintertime.