Factors affecting the implementation of green specifications in construction

Green specifications constitute one of the important elements in green construction. New sustainability requirements and changing priorities in construction management have spurred the emerging green specifications to a faster pace of development. A cross-sectional survey has been conducted in Hong Kong in 2007 to identify principal factors leading to the success of preparing green specifications. Based on extensive construction management literature, 20 variables concerning sustainable construction were summarized. Using the Mann–Whitney U-test, the subtle differences between stakeholders in specifying construction work have been detected even with the high consistency of the responses among the groups. Moreover, five independent factors for successful specification of green construction have been categorized by factor analysis. They are related to (1) green technology and techniques, (2) reliability and quality of specification, (3) leadership and responsibility, (4) stakeholder involvement, and (5) guide and benchmarking systems. Whilst the first and fourth factors are generally more important, different stakeholder groups have different emphases. The results of the survey have been validated against established principles.     

Co-pyrolysis of swine manure with agricultural plastic waste: Laboratory-scale study

Manure-derived biochar is the solid product resulting from pyrolysis of animal manures. It has considerable potential both to improve soil quality with high levels of nutrients and to reduce contaminants in water and soil. However, the combustible gas produced from manure pyrolysis generally does not provide enough energy to sustain the pyrolysis process. Supplementing this process may be achieved with spent agricultural plastic films; these feedstocks have large amounts of available energy. Plastic films are often used in soil fumigation. They are usually disposed in landfills, which is wasteful, expensive, and environmentally unsustainable. The objective of this work was to investigate both the energetics of co-pyrolyzing swine solids with spent plastic mulch films (SPM) and the characteristics of its gas, liquid, and solid byproducts. The heating value of the product gas from co-pyrolysis was found to be much higher than that of natural gas; furthermore, the gas had no detectable toxic fumigants. Energetically, sustaining pyrolysis of the swine solids through the energy of the product gas could be achieved by co-pyrolyzing dewatered swine solids (25% m/m) with just 10% SPM. If more than 10% SPM is used, the co-pyrolysis would generate surplus energy which could be used for power generation. Biochars produced from co-pyrolyzing SPM and swine solid were similar to swine solid alone based on the surface area and the ¹H NMR spectra. The results of this study demonstrated the potential of using pyrolysis technology to manage two prominent agricultural waste streams (SPM and swine solids) while producing value-added biochar and a power source that could be used for local farm operations.     

Case study of landfill reclamation at a Florida landfill site

A landfill reclamation project was considered to recover landfill airspace and soil, reduce future groundwater impacts by removing the waste buried in the unlined area, and optimize airspace use at the site. A phased approach was utilized to evaluate the technical and economic feasibility of the reclamation project; based on the results of these evaluations, approximately 6.8 ha of the unlined cells were reclaimed. Approximately 371,000 in-place cubic meters of waste was mined from 6.8 ha in this project. Approximately 230,600 cubic meters of net airspace was recovered due to beneficial use of the recovered final cover soil and reclaimed soil as intermediate and daily cover soil, respectively, for the current landfill operations. This paper presents the researchers’ landfill reclamation project experience, including a summary of activities pertaining to reclamation operations, an estimation of reclamation rates achieved during the project, project costs and benefits, and estimated composition of the reclaimed materials.     

Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

An empirical model of soil chemical properties that regulate methane production in Japanese rice paddy soils

To understand which soil chemical properties are the best predictors of CH4 production in rice paddy soils, a model was developed with empirical data from nine types of rice soils collected around Japan and anaerobically incubated at 30 degrees C for 16 wk in laboratory conditions. After 1, 2, 4, 8, and 16 wk of incubation, CO2, CH4, and Fe(II) were measured to understand soil organic matter decomposition and iron (Fe) reduction. Available N (N ava) was also measured at the end of incubation. The results showed that decomposable C and reducible Fe are two key parameters that regulate soil CH(4) production (P CH4). There was a significant relationship between decomposable C and available N (N ava) (r2 = 0.975**). Except for a sandy soil sample, a significant relationship between total Fe (Fe total) and reducible Fe was found. From this experiment, a simple model of soil CH4 production was developed: P CH4 = 1.593N(ava) - 2.460Fe total/1000 (each unit was mg kg(-1) soil). After simulated CH4 production by two soil chemical properties as above, there was a significant consistency between model simulation and actual measurement (r2 = 0.831**).     

Kinetics of mass and DNA decomposition in tomato leaves

This laboratory study investigated the kinetics of leaf and DNA content decomposition in two varieties of tomato (Palmiro and Admiro) after incubation in soil for 35 days. Results revealed that the decrease of dry matter in leaves in both varieties did not follow a single exponential function and was better described by a double exponential model. Composite half-decrease times were 3.4 and 2.4 days for Palmiro and Admiro respectively. The same pattern was observed for DNA mass loss, although this was closer to a single exponential model with composite half-decrease times of 1.5 and 1.4 days. Genomic analysis showed that DNA in dried leaves at room temperature (not inoculated in the soil), remains intact or presents a weak degradation, and DNA extracted from leaves inoculated in non-sterile soil showed degradation after two days. These results indicate that before release an important quantity of DNA may be degraded inside plant tissues during decomposition in soil.     

内蒙古草原挥发性有机物排放通量的研究

2002年夏季,利用静态箱方法,对我国内蒙古草原生态系统挥发性有机物的排放进行了首次测量,同时观测了太阳辐射、温湿度等参数.结果表明,异戊二烯是草地挥发性有机物排放中的主要成分.异戊二烯的排放有明显的日变化、逐日变化和季节变化规律.因子分析表明,可见光辐射、温度、水汽含量是影响异戊二烯排放的主要因子,而且可见光辐射是控制其排放过程的最主要因子.根据相关分析,在考虑影响异戊二烯的排放因子时,不仅要考虑通常的影响因子--可见光辐射、温度,还要考虑水汽的作用.箱方法的使用不可避免地造成箱内外太阳辐射、温湿度等的差别,因此,必须考虑修正采样箱对挥发性有机物排放通量带来的影响.2002年夏季,异戊二烯排放通量(C)的最大值为1649.3μg/(m²·h).6、8、9月采样期间异戊二烯排放通量的日平均值分别为886.6、707.0、427.2μg/(m²·h).     

COST BEHAVIOR AND WATER SYSTEMS1

ABSTRACT: Several factors theoretically affect the cost behavior of water systems. These factors include scale, consumer density, and per capita usage. This analysis examines the several possible influences on the unit costs of water service. The statistical analyses indicate that among the factors of scale, per capita use, and consumer density, only the first two factors are important influences on water system costs. Water consumers appear to benefit from being served by large systems and being located in service areas characterized by relatively high per capita consumption. There is little statistical evidence indicating that more dense areas can be provided water service at lower costs than less dense areas.     

Book reviews

The Garden City Utopia

Robert Beevers. The Macmillan Press, 1988. £27.50. 206 pages.

Cost‐Benefit Analysis in Urban and Regional Planning

J. A. Schofield. Allen and Unwin, London, 1987. 249 pages. £30 hardback.

The Milton Park Affair — Canada's largest citizen‐developer confrontation

Claire Helman. Véhicule Press, Montréal, 1987. $12.95.

Regenerating the Inner City, Glasgow's Experience

Edited by David Donnison and Alan Middleton. Routledge & Kegan Paul Ltd., London, 1987. £12.95.

Community Architecture

Nick Wates and Charles Knevitt. Penguin Books, London, 1987. £4.95.