Mechanism of effective nocardioform foam control measures for non-selector activated sludge systems.

Solids retention time (SRT), biological scum trapping and recycle, and the dynamic equilibrium between Nocardioform populations in the foam and the mixed liquor are the controlling factors in activated sludge foaming events caused by Nocardioform bacteria. For the operating modes described in this paper, a cured mixed liquor foaming condition (filament counts of approximately 10(5) intersections/g volatile suspended solids) was only achieved when SRT control, selective wasting, and polymer addition were in effect. Solids retention time control, with the SRT remaining below 1.5 days, and selective wasting will cure a severely foaming mixed liquor, but effects will only be observed after 3 or 4 months after implementation. The combined wastage of Nocardioform bacteria from selective wasting and SRT control can ensure long-term foam control to the operation of a pure-oxygen activated sludge system with foam-trapping features. An SRT of 0.3 days will result in the complete washout of Nocardioform bacteria from the activated sludge system, which can then operate at an SRT of 3 days free of Nocardioform. Polymer addition to mixed liquor is only effective for foam control when a large portion of the system biomass exists as a heavy layer of foam above the mixed liquor.     

Geoengineering and sustainability

ABSTRACT

Geoengineering is regarded by advocates as a creative and responsible technological option in the face of a climate emergency. Critics often see it as a hubristic attempt to play God, with disastrous consequences for the planet and humanity. These antipodal perspectives are represented by the ideal types of Prometheans and Gaians. Prometheans and Gaians typically talk past each other. The geoengineering debate can be made more fruitful by well articulating their respective positions and subsequently situating them in the discourse of sustainability. A sustainability orientation does not answer the troubling question whether geoengineering should be developed and deployed. But it can foster a ‘fusion of horizons’ between Prometheans and Gaians, providing common ground in an otherwise polarized debate and making a more productive dialogue possible.     

Stratospheric ozone depletion, UV-B radiation and crop disease

Ultraviolet-B radiation (UV-B: 290-315 nm) is expected to increase as the result of stratospheric ozone depletion. Within the environmental range, UV-B effects on host plants appear to be largely a function of photomorphogenic responses, while effects on fungal pathogens may include both photomorphogenesis and damage. The effects of increased UV-B on plant-pathogen interactions has been studied in only a few pathosystems, and have used a wide range of techniques, making generalisations difficult. Increased UV-B after inoculation tends to reduce disease, perhaps due to direct damage to the pathogen, although responses vary markedly between and within pathogen species. Using Septoria tritici infection of wheat as a model system, it is suggested that even in a species that is inherently sensitive to UV-B, the effects of ozone depletion in the field are likely to be small compared with the effects of variation in UV-B due to season and varying cloud. Increased UV-B before inoculation causes a range of effects in different systems, but an increase in subsequent disease is a common response, perhaps due to changes in host surface properties or chemical composition. Although it seems unlikely that most crop diseases will be greatly affected by stratospheric ozone depletion within the limits currently expected, the lack of a detailed understanding of the mechanisms by which UV-B influences plant-pathogen interactions in most pathosystems is a significant limit to such predictions.     

Influence of pre-treatment step on PAHs analyses in contaminated soils

There is no specific standardization for the pre-treatment of a soil sample for PAHs analyses. The ISO/FDIS 14507 method for soil quality gives a guidance for sample pre-treatment before measurement of organic contaminants in soil. It refers to cryogenic crushing which is not so easy to carry out. So, analysts lead to develop in house methods which can be very different from a laboratory to another and can involve deviations in the pollution quantification. This study has explored different ways of drying, grinding and sieving in order to determine the influence of the soil sample handling on the measured pollutant concentration. It appears that the influence of pre-treatment depends on the soil nature and on the PAHs distribution. As a conclusion, it is advised "light" drying ways like air drying or drying at 40 degrees C in a drying oven instead of more "drastic" ways (freeze-drying, cryogenic crushing) which can induce some losses. Crushing and sieving are also recommended for more reproducible measures.     

Methylmercury, fish consumption, and the precautionary principle

This paper considers several broad issues in the context of probabilistic assessment of the benefits of curtailing mercury (Hg) emissions from U.S. coal-fired power plants, based on information developed from recent literature and epidemiology studies of health effects of methylmercury. Exposure of the U.S. population is considered on the national scale, in large part because of recent questions arising from survey and experimental data about the relative importance of local deposition of airborne Hg. Although epidemiological studies have provided useful information, safe levels of Hg exposure remain uncertain, in part because of other dietary considerations in the populations that were studied. For example, much of the seafood consumed in one of the major studies was also contaminated with polychlorinated biphenyls, as are fish taken from some U.S. fresh waters. The primary epidemiological approach involves cross-study comparisons in relation to mean exposures, rather than detailed critiques of individual effects reported in each study. U.S. exposures are seen to be well below the levels at which adverse health effects are reported. This analysis supports the conclusion that unilateral reduction of Hg emissions from U.S. coal-fired power plants alone is unlikely to realize significant public health benefits.     

Reducing bioassay variability by identifying sources of variation and controlling key parameters in assay protocol

Reducing bioassay variability by identifying sources of variation and controlling important parameters in assay protocol was demonstrated in this study. The variability of a bioassay based on a luminescent bacterium was examined as an example. This assay involved the growth of cells, storage at a low temperature, activation, and exposure to a test sample, and the assay response was bioluminescence inhibition. After determining that measurement error was small and negligible, the total assay variability was decomposed in an initial variance components study into between-batch, between-vial, and between-tube variations. Results indicated that between-vial variations accounted for the majority of the total observed variability and that reducing this type of variation would be beneficial. Five parameters in the assay protocol were determined as factors that potentially affected assay variability significantly. A split-plot design was employed to investigate the effects of these factors and some of their interactions on the assay response. One of the five factors, i.e., activation temperature, turned out to have a significant effect. The variance components study was repeated with better control of activation temperature as well as other parameters. Results indicated that the total variability of the bioassay was reduced by approximately 85%.     

Solute transport in crystalline rocks at Aspö--I: geological basis and model calibration

Water-conducting faults and fractures were studied in the granite-hosted Asp? Hard Rock Laboratory (SE Sweden). On a scale of decametres and larger, steeply dipping faults dominate and contain a variety of different fault rocks (mylonites, cataclasites, fault gouges). On a smaller scale, somewhat less regular fracture patterns were found. Conceptual models of the fault and fracture geometries and of the properties of rock types adjacent to fractures were derived and used as input for the modelling of in situ dipole tracer tests that were conducted in the framework of the Tracer Retention Understanding Experiment (TRUE-1) on a scale of metres. After the identification of all relevant transport and retardation processes, blind predictions of the breakthroughs of conservative to moderately sorbing tracers were calculated and then compared with the experimental data. This paper provides the geological basis and model calibration, while the predictive and inverse modelling work is the topic of the companion paper [J. Contam. Hydrol. 61 (2003) 175]. The TRUE-1 experimental volume is highly fractured and contains the same types of fault rocks and alterations as on the decametric scale. The experimental flow field was modelled on the basis of a 2D-streamtube formalism with an underlying homogeneous and isotropic transmissivity field. Tracer transport was modelled using the dual porosity medium approach, which is linked to the flow model by the flow porosity. Given the substantial pumping rates in the extraction borehole, the transport domain has a maximum width of a few centimetres only. It is concluded that both the uncertainty with regard to the length of individual fractures and the detailed geometry of the network along the flowpath between injection and extraction boreholes are not critical because flow is largely one-dimensional, whether through a single fracture or a network. Process identification and model calibration were based on a single uranine breakthrough (test PDT3), which clearly showed that matrix diffusion had to be included in the model even over the short experimental time scales, evidenced by a characteristic shape of the trailing edge of the breakthrough curve. Using the geological information and therefore considering limited matrix diffusion into a thin fault gouge horizon resulted in a good fit to the experiment. On the other hand, fresh granite was found not to interact noticeably with the tracers over the time scales of the experiments. While fracture-filling gouge materials are very efficient in retarding tracers over short periods of time (hours-days), their volume is very small and, with time progressing, retardation will be dominated by altered wall rock and, finally, by fresh granite. In such rocks, both porosity (and therefore the effective diffusion coefficient) and sorption K(d)s are more than one order of magnitude smaller compared to fault gouge, thus indicating that long-term retardation is expected to occur but to be less pronounced.     

Earthworm biomass as additional information for risk assessment of heavy metal biomagnification: a case study for dredged sediment-derived soils and polluted floodplain soils

The important role of earthworms in the biomagnification of heavy metals in terrestrial ecosystems is widely recognised. Differences in earthworm biomass between sites is mostly not accounted for in ecological risk assessment. These differences may be large depending on soil properties and pollution status. A survey of earthworm biomass and colonisation rate was carried out on dredged sediment-derived soils (DSDS). Results were compared with observations for the surrounding alluvial plains. Mainly grain size distribution and time since disposal determined earthworm biomass on DSDS, while soil pollution status of the DSDS was of lesser importance. Highest earthworm biomass was observed on sandy loam DSDS disposed at least 40 years ago.     

Distribution of organochlorine pesticides, polychlorinated biphenyls and alpha-HCH enantiomers in pork tissues

The distribution of HCH isomers, DDT analogues and selected PCB congeners in pork organs collected from the same individuals raised in Romanian farms was investigated. Organochlorine pesticides (HCHs and DDTs) were the principal contaminants in all samples, while PCB concentrations were low, in accordance with previously reported concentrations from Romanian animal farms. The most part of the pollutant load in the body is retained in the adipose tissue, with HCHs ranging between 16 and 27.7 ng/g lipid and with higher concentrations of DDTs ranging between 65.9 and 334.5 ng/g lipid. The highest PCB levels (up to 32 ng/g lipid) were measured in lung and liver. The lipid-normalized concentrations in the brain were lower than in all other tissues due to the presence of the blood-brain barrier or due to a lower proportion of the neutral lipids such as triglycerides. The highest concentrations of DDTs were measured in muscle and fat, with p,p'-DDE being the principal contributor and with a variable contribution of p,p'-DDD and p,p'-DDT. In liver, p,p'-DDD has a higher contribution to the sum DDTs, while in all analyzed livers, the concentration of p,p'-DDT was very low. beta-HCH was the most persistent HCH isomer in all tissues, accounting for 40-97% of sum HCHs. For all animals, the highest concentrations of beta-HCH and HCHs were found in liver, while the lowest HCH concentrations were measured in brain and spinal marrow. Additionally, the distribution of alpha-HCH enantiomers in the tissues was discussed. In all samples (except 2 brain samples), (+) alpha-HCH was depleted and (-) alpha-HCH was enantioenriched. Enantiomeric ratios in brain were the highest measured values between all organs. For all studied animals, ERs increased in the order fat < muscle < liver < brain.