Prediction of SVOC vegetation and atmospheric concentrations using calculated deposition velocities

A simple modeling concept was previously applied to study air-foliage exchange of both polybrominated diphenyl ethers (PBDEs) and polycyclic aromatic hydrocarbons (PAHs) using field measurements. In this paper, the predictive capabilities of this framework were tested using an independent set of data collected at the same sampling location for a different time period. Firstly, atmospheric (particle-bound and gaseous phase) PBDE and PAH concentrations were used to predict their accumulation in spruce needles. Conversely, we used PBDE and PAH concentrations in vegetation to predict their atmospheric concentrations. In both cases, calculated and measured values showed good agreement, providing evidence that the developed framework and our derived deposition velocities can be used as a predictive tool for these two different classes of semi-volatile organic compounds.     

Indices of Grassland Biodiversity in the Chihuahuan Desert Ecoregion Derived from Remote Sensing

Abstract: We used a relatively simple and direct remote-sensing approach to determine biodiversity values in arid ecosystems and thus identify potential conservation sites. We developed indices based on regression models between grass, shrub, litter, exposed-soil groundcover components, and Landsat thematic mapper satellite imagery reflectance values over a reference site in the northern Chihuahuan Desert in New Mexico. This site supports low-disturbance desert grasslands that have been excluded from livestock grazing for 55 years and moderate-disturbance grasslands that have been under a continuous grazing regime for over 100 years. Greater richness and abundance of noninvasive and nonruderal plant species were associated with the low-disturbance grasslands that had lower shrub abundance, increased litter and grass cover, and lower exposed soil. Using the thematic mapper indices, we computed an additive grassland biodiversity index such that, as exposed soil and shrub values go down, litter and grass values go up, as does the biodiversity index. When the biodiversity index was applied to the reference-site landscape, grasslands previously identified for their high conservation value were detected. As a further test, we applied the indices to a site in Chihuahua, Mexico, that supports similar grasslands but for which there are few other data on condition and conservation values. The soil, grass, and shrub indices were moderately effective in describing the range of variation at the Mexico site, but the litter equation was not. Still, higher biodiversity value in terms of nonruderal plant diversity tended to correspond to higher grass cover and lower soil exposure and a higher overall biodiversity index. Some localized calibration with geologic substrate may be required along with an assessment of the temporal constraints, but generally the index shows promise for quickly and efficiently detecting desert grasslands of high biodiversity conservation value.     

The fate of fipronil in modular estuarine mesocosms

The degradation and corresponding product manifold for the pesticide fipronil was determined in three replicate estuarine mesocosms. Aqueous fipronil concentrations rapidly decreased over the 672 h timescale of the experiment (95% removal). Loss was apparently first-order in fipronil, although there appeared to be a change in the removal mechanism after 96 h that corresponded to a dramatic slowdown in its disappearance. The reduction product of fipronil, fipronil sulfide, was not detected in the water column; however, it formed rapidly in sediments and was identified as the major product of fipronil degradation in the system (20% yield at 672 h, with respect to initial fipronil concentration). Fipronil sulfone is thought to form primarily via biological oxidation; and, although it was generated rapidly in the water column (10% yield), only trace amounts were detected in the sediment (1% yield). The direct photolysis product of fipronil, fipronil desulfinyl, was present in all samples; it formed rapidly in the water column (4% yield) and partitioned into the sediment phase (7% yield) over the course of the experiment. The mass balance on fipronil and associated products was 42% at 672 h.     

Effects of management and climate on elk brucellosis in the Greater Yellowstone Ecosystem.

Every winter, government agencies feed approximately 6000 metric tons (6 x 10(6) kg) of hay to elk in the southern Greater Yellowstone Ecosystem (GYE) to limit transmission of Brucella abortus, the causative agent of brucellosis, from elk to cattle. Supplemental feeding, however, is likely to increase the transmission of brucellosis in elk, and may be affected by climatic factors, such as snowpack. We assessed these possibilities using snowpack and feeding data from 1952 to 2006 and disease testing data from 1993 to 2006. Brucellosis seroprevalence was strongly correlated with the timing of the feeding season. Longer feeding seasons were associated with higher seroprevalence, but elk population size and density had only minor effects. In other words, the duration of host aggregation and whether it coincided with peak transmission periods was more important than just the host population size. Accurate modeling of disease transmission depends upon incorporating information on how host contact rates fluctuate over time relative to peak transmission periods. We also found that supplemental feeding seasons lasted longer during years with deeper snowpack. Therefore, milder winters and/or management strategies that reduce the length of the feeding season may reduce the seroprevalence of brucellosis in the elk populations of the southern GYE.     

A strategy for the next decade to address data deficiency in neglected biodiversity

Measuring progress toward international biodiversity targets requires robust information on the conservation status of species, which the International Union for Conservation of Nature (IUCN) Red List of Threatened Species provides. However, data and capacity are lacking for most hyperdiverse groups, such as invertebrates, plants, and fungi, particularly in megadiverse or high-endemism regions. Conservation policies and biodiversity strategies aimed at halting biodiversity loss by 2020 need to be adapted to tackle these information shortfalls after 2020. We devised an 8-point strategy to close existing data gaps by reviving explorative field research on the distribution, abundance, and ecology of species; linking taxonomic research more closely with conservation; improving global biodiversity databases by making the submission of spatially explicit data mandatory for scientific publications; developing a global spatial database on threats to biodiversity to facilitate IUCN Red List assessments; automating preassessments by integrating distribution data and spatial threat data; building capacity in taxonomy, ecology, and biodiversity monitoring in countries with high species richness or endemism; creating species monitoring programs for lesser-known taxa; and developing sufficient funding mechanisms to reduce reliance on voluntary efforts. Implementing these strategies in the post-2020 biodiversity framework will help to overcome the lack of capacity and data regarding the conservation status of biodiversity. This will require a collaborative effort among scientists, policy makers, and conservation practitioners.     

Coastal flooding,climate change and environmental justice: identifying obstacles and incentives for adaptation in two metropolitan Boston Massachusetts communities

We explored the possible future impacts of increased coastal flooding due to sea level rise and the potential adaptation responses of two urban, environmental justice communities in the metropolitan Boston area of Massachusetts. East Boston is predominantly a residential area with some industrial and commercial activities, particularly along the coastal fringe. Everett, a city to the north of Boston, has a diversified industrial and commercial base. While these two communities have similar socioeconomic characteristics, they differ substantially in the extent to which residents would be impacted by increased coastal flooding. In East Boston, a large portion of residents would be flooded, while in Everett, it is the commercial/industrial districts that are primarily vulnerable. Through a series of workshops with residents in each community, we found that the target populations do not have an adaptation perspective or knowledge of any resources that could assist them in this challenge. Furthermore, they do not feel included in the planning processes within their communities. However, a common incentive for both communities was an intense commitment to their communities and an eagerness to learn more and become actively engaged in decisions regarding climate change adaptation. The lessons that can be applied to other studies include 1) images are powerful tools in communicating concepts, 2) understanding existing cultural knowledge and values in adaptation planning is essential to the planning process and 3) engaging local residents at the beginning of the process can create important educational opportunities and develop trust and consensus that is necessary for moving from concept to implementation.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.