Low paternity in the hornet Vespa crabro indicates that multiple mating by queens is derived in vespine wasps

Queen mating frequency was studied in the European hornet, Vespa crabro, by analyzing four DNA microsatellite loci in 20 workers from each of 14 nests. Queens were found to be predominantly singly mated (9/14), although double (4/14) and triple mating (1/14) also occurred. For most multiply mated queens, paternity was significantly biased with the majority male fathering on average 80% of the female offspring. The population-wide effective mating frequency was therefore low (1.11), and sister-sister relatedness high (0.701 ± 0.023 SE). Low effective mating frequency in Vespa, in combination with data from other vespines, suggests that high paternity frequency is derived in the group. Some problems with the non-detection of fathers, where the queen was not sampled or shared alleles with males, are analyzed. Received: 16 November 1998 / Received in revised form: 29 March 1999 / Accepted: 12 April 1999     

Fluoride Concentration in Drinking Water in The Province of Soria (Central Spain) and Caries in Children

The fluoride content in the water supply of the Soria province is not normally above 0.2mg L^–1 and its geographical distribution is related to the lithological and geological features of the zone, the highest concentration being associated with the Miocene clay formation of the Almazán Basin.A statistical analysis confirms a connection between this fluoride content and tooth decay among children in rural areas. However, other factors such as oral hygiene and diet have been found to affect tooth decay.     

Ant gardens: interspecific recognition in parabiotic ant species

 In French Guiana, parabiotic societies (natural mixed colonies) are frequently found in ant gardens. Crematogaster limata parabiotica (Myrmicinae), often associated with Camponotus femoratus (Formicinae), was found for the first time in parabiosis with ponerine ants: Pachycondyla goeldii and Odontomachus mayi. A detailed study of the relationships between Cr. l. parabiotica and O. mayi showed that each species is aggressive towards allospecific or conspecific individuals belonging to another colony, but tolerates allospecific individuals from the multi-species society. Studies of cuticular substances of the four ant species were made using gas chromatography. The results showed that each species, living alone or in parabiosis, possesses a specific chemical profile. Thus, the ants are able to recognise nestmate and non-nestmate individuals of the associated species, even though their cuticular profiles are different. The hypothesis that the nestmate allospecific profile is learned is suggested to explain this pattern of recognition. Received: 5 June 1996 / Accepted after revision: 17 October 1996     

Is sex-biased maternal care limited by total maternal expenditure in polygynous ungulates?

We examined data on sex-specific differences in neonatal weight, litter size and adult female body weight in 32 populations of polygynous ungulates of 18 different species to test for the existence of a trade-off between sex-biased maternal care and the total amount of maternal expenditure. This corresponds to an extension of the hypothesis of Byers and Moodie (1990) that sex-biased maternal care is limited by a high level of maternal expenditure. We did not find any relationship between sex-biased care and two measures of total maternal expenditure. We highlighted high intraspecific variability in sex-biased care and very low intraspecific variability in total maternal expenditure. Even when this between-population variability in sex-biased care was accounted for, no relationship between sex-biased maternal care and maternal expenditure was detected. Apart from difficulties in finding suitable measures for both variables, two other reasons may account for the lack of a relationship between sex-biased maternal care and total maternal expenditure. Firstly, male offspring seem to be more affected than female offspring by harsh environmental conditions. This may lead to the variation observed in the extent of sex-specific differences in birth weight within a single species. If we assume that for a given maternal expenditure reproductive costs incurred by mothers are highest during harsh conditions, this could indicate the existence of a trade-off between sex-biased maternal care and maternal expenditure at the intra-specific level, thereby supporting the Byers and Moodie hypothesis. Secondly, polygyny is only a poor predictor of sex-biased care and factors such as compensatory growth or extended periods of growth may be expected to modify predictions for different species. Thus, environmental conditions and relative effects of maternal care on male and female lifetime reproductive success are better predictors of sex-biased care than total maternal expenditure.Communicated by P.M. Kappeler     

Improvement of electrical resistivity tomography for leachate injection monitoring

Leachate recirculation is a key process in the scope of operating municipal waste landfills as bioreactors, which aims to increase the moisture content to optimize the biodegradation in landfills. Given that liquid flows exhibit a complex behaviour in very heterogeneous porous media, in situ monitoring methods are required. Surface time-lapse electrical resistivity tomography (ERT) is usually proposed. Using numerical modelling with typical 2D and 3D injection plume patterns and 2D and 3D inversion codes, we show that wrong changes of resistivity can be calculated at depth if standard parameters are used for time-lapse ERT inversion. Major artefacts typically exhibit significant increases of resistivity (more than +30%) which can be misinterpreted as gas migration within the waste. In order to eliminate these artefacts, we tested an advanced time-lapse ERT procedure that includes (i) two advanced inversion tools and (ii) two alternative array geometries. The first advanced tool uses invariant regions in the model. The second advanced tool uses an inversion with a “minimum length” constraint. The alternative arrays focus on (i) a pole–dipole array (2D case), and (ii) a star array (3D case). The results show that these two advanced inversion tools and the two alternative arrays remove almost completely the artefacts within +/?5% both for 2D and 3D situations. As a field application, time-lapse ERT is applied using the star array during a 3D leachate injection in a non-hazardous municipal waste landfill. To evaluate the robustness of the two advanced tools, a synthetic model including both true decrease and increase of resistivity is built. The advanced time-lapse ERT procedure eliminates unwanted artefacts, while keeping a satisfactory image of true resistivity variations. This study demonstrates that significant and robust improvements can be obtained for time-lapse ERT monitoring of leachate recirculation in waste landfills.     

Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator

This paper presents an investigation of the mineralogy and pore water chemistry of a boiler ash sampled from a municipal solid waste fluidized-bed incinerator, subject to 18 months of dynamic leaching in a large percolation column experiment. A particular focus is on the redox behaviour of Cr(VI) in relation to metal aluminium Al⁰, as chromium may represent an environmental or health hazard. The leaching behaviour and interaction between Cr(VI) and Al⁰ are interpreted on the basis of mineralogical evolutions observed over the 18-month period and of saturation indices calculated with the geochemical code PhreeqC and reviewed thermodynamic data. Results of mineralogical analyses show in particular the alteration of mineral phases during leaching (e.g. quartz and metal aluminium grains), while geochemical calculations suggest equilibria of percolating fluids with respect to specific mineral phases (e.g. monohydrocalcite and aluminium hydroxide). The combination of leaching data on a large scale and mineralogical analyses document the coupled leaching behaviour of aluminium and chromium, with chromium appearing in the pore fluids in its hexavalent and mobile state once metal aluminium is no longer available for chromium reduction.     

Potentially toxic elements in bottom ash from hazardous waste incinerators: an integrated approach to assess the potential release in relation to solid-phase characteristics

Journal of Material Cycles and Waste Management - Understanding the chemical and mineralogical characteristics of bottom ash (BA) containing Potentially Toxic Elements (PTEs, e.g., As, Cd, Co, Cu,...     

A management system for end-of-life tyres: a Portuguese case study

The European Union introduced several policy instruments based in the extended producer responsibility (EPR) in order to improve the environmental performance of products and services through their life cycles. In this context, the Portuguese government decided to apply the EPR concept to tyres, and producers were obliged to constitute an end-of-life management system to promote the collection, recycling and reuse of end-of-life (EOL) tyres. This required producers, distributors, recyclers and retreaders to be identified and characterized, and local processing infrastructures to be analyzed. The information was used to design an economically optimised EOL tyre management system while promoting the activity of all EOL operators in order for the imposed collecting and recovery targets to be fulfilled. This paper discusses the interaction between the different governmental, private and academic institutions for the creation of the integrated management system for EOL tyres, the approach taken, the technical, political and legal aspects underneath them, as well as the environmental consequences induced by the creation of the management system. The results obtained during the first years of operation are reported and show an increase in the collection and recycling of EOL tyres and the consolidation of the collection and processing infrastructures.     

Leaching behaviour of hazardous demolition waste

Demolition wastes are generally disposed of in unlined landfills for inert waste. However, demolition wastes are not just inert wastes. Indeed, a small fraction of demolition waste contains components that are hazardous to human health and the environment, e.g., lead-based paint, mercury-contained in fluorescent lamps, treated wood, and asbestos. The objective of this study is to evaluate the release potential of pollutants contained in these hazardous components when they are mixed with inert wastes in unlined landfills. After identification of the different building products which can contain hazardous elements and which can be potentially pollutant in landfill scenario, we performed leaching tests using three different lysimeters: one lysimeter containing only inert wastes and two lysimeters containing inert wastes mixed with hazardous demolition wastes. The leachates from these lysimeters were analysed (heavy metals, chlorides, sulphates fluoride, DOC (Dissolved Organic Carbon), phenol index, and PAH). Finally, we compared concentrations and cumulative releases of elements in leachates with the limits values of European regulation for the acceptance of inert wastes at landfill. Results indicate that limit values are exceeded for some elements. We also performed a percolation column test with only demolition hazardous wastes to evaluate the specific contribution of these wastes in the observed releases.     

Lateral migration and offsite surface emission of landfill gas at City of Montreal Landfill Site

An evaluation of lateral landfill gas migration was carried out at the Saint-Michel Environmental Complex in Montreal, City of Montreal Landfill Site, Canada, between 2003 and 2005. Biogas concentration measurements and gas-pumping tests were conducted in multilevel wells installed in the backfilled overburden beside the landfill site. A migration event recorded in autumn 2004 during the maintenance shutdown of the extraction system was simulated using TOUGH-LGM software. Eleven high-density instantaneous surface monitoring (ISM) surveys of methane were conducted on the test site. Gas fluxes were calculated by geostatistical analyses of ISM data correlated to dynamic flux chamber measurements. Variograms using normal transformed data showed good structure, and kriged estimates were much better than inverse distance weighting, due to highly skewed data. Measurement-based estimates of yearly off-site surface emissions were two orders of magnitude higher than modelled advective lateral methane flux. Nucleodensimeter measurements of the porosity were abnormally high, indicating that the backfill was poorly compacted. Kriged porosity maps correlated well with emission maps and areas with vegetation damage. Pumping tests analysis revealed that vertical permeability was higher than radial permeability. All results suggest that most of the lateral migration and consequent emissions to the atmosphere were due to the existence of preferential flow paths through macropores. In December 2006, two passively vented trenches were constructed on the test site. They were successful in countering lateral migration.