Effects of spatial and temporal scales on cultural services valuation

The monetary valuation of ecosystem services has proved to be a powerful tool for influencing management decisions, as it can be used to quantify the relative importance of various ecosystem functions. However, these valuation methods are rarely implemented with adequate care; in particular, they do not consider spatial and temporal variations in the services offered and demanded. This paper examines the effect of heterogeneity on the valuation of cultural services offered by the Doñana natural protected area in Spain. We apply the zonal travel cost method at various spatial scales, and the individual travel cost method at various temporal scales. We conclude that economic valuation techniques must account for spatial and temporal heterogeneity if they are to provide accurate and realistic information.     

Air pollution impacts of speed limitation measures in large cities: The need for improving traffic data in a metropolitan area

Assessing the effects of air quality management strategies in urban areas is a major concern worldwide because of the large impacts on health caused by the exposure to air pollution. In this sense, this work analyses the changes in urban air quality due to the introduction of a maximum speed limit to 80 km h^?1 on motorways in a large city by using a novel methodology combining traffic assimilation data and modelling systems implemented in a supercomputing facility. Albeit the methodology has been non-specifically developed and can be extrapolated to any large city or megacity, the case study of Barcelona is presented here. Hourly simulations take into account the entire year 2008 (when the 80 km h^?1 limit has been introduced) vs. the traffic conditions for the year 2007. The data has been assimilated in an emission model, which considers hourly variable speeds and hourly traffic intensity in the affected area, taken from long-term measurement campaigns for the aforementioned years; it also permits to take into account the traffic congestion effect. Overall, the emissions are reduced up to 4%; however the local effects of this reduction achieve an important impact for the adjacent area to the roadways, reaching 11%. In this sense, the speed limitation effects assessed represent enhancements in air quality levels (5–7%) of primary pollutants over the area, directly improving the welfare of 1.35 million inhabitants (over 41% of the population of the Metropolitan Area) and affecting 3.29 million dwellers who are potentially benefited from this strategy for air quality management (reducing 0.6% the mortality rates in the area).     

Emission profiles of polychlorinated dibenzodioxins, polychlorinated dibenzofurans (PCDD/Fs), dioxin-like PCBs and hexachlorobenzene (HCB) from secondary metallurgy industries in Portugal

This paper reports, for the first time, a study of dioxin emissions from 10 siderurgies and metallurgies, secondary copper, aluminum and lead metallurgies, in Portugal. The study reports the emission factors and total emission amounts of PCDD/Fs, dioxin-like PCBs and hexachlorobenzene (HCB). The congener patterns were characterized and are discussed. The results showed that the total amount of PCDFs is higher than PCDDs in flue gas of each industrial unit. The toxic equivalent emission factors of pollutants emitted are 3098-3338 ngI-TEQt(-1) for PCDD/Fs and 597-659 ng I-TEQt(-1) for dioxin-like PCBs in siderurgies production (total estimated emission amounts released to atmosphere of 3.9-4.5 g I-TEQyr(-1)), 50-152 ng I-TEQt(-1) for PCDD/Fs and 24-121 ng I-TEQt(-1) for dioxin-like PCBs in ferrous foundries production (total estimated emission amounts released to atmosphere of 0.0010-0.0016 g I-TEQyr(-1)) and 5.8-5715 ng I-TEQt(-1) for PCDD/Fs and 0.49-259 ng I-TEQt(-1) for dioxin-like PCBs in non-ferrous foundries production (total estimated emission amounts released to atmosphere of 0.00014-0.12 g I-TEQyr(-1)). The HCB emission from siderurgies production is 0.94-3.2 mg t(-1) (total estimated emission amounts released 0.94-3.8 g yr(-1)), being much smaller, residual, in the emissions of the other types of plants (0.0012-0.026 mg t(-1) production and total estimated emission amounts released to atmosphere of 0.013-1.7 mg yr(-1)).     

Population characteristics of young African women influencing prenatal exposure to DDT (Manhiça, Mozambique)

The concentrations of dichlorodiphenyltrichloroethane (DDT) compounds in cord blood of 214 children born between 2003 and 2006 in Manhiça (Mozambique) have been determined. In this time interval, corresponding to the period before DDT reintroduction for indoor residual spraying, the observed values averaged 0.8 and 0.4 ng/ml for 4,4′-dichlorodiphenyldichloroethylene (4,4′-DDE) and 4,4′-DDT, respectively, and were similar to those found in western countries. However, the 4,4′-DDT/4,4′-DDE ratio was high indicating that the inputs of these compounds arriving to children in utero originated from recent uses of the insecticide. The strongest factor affecting DDT concentration was parity. A well-defined decreasing concentration trend was observed for the cord blood concentrations in the period of study. The trend was also observed for multiparae and primiparae mothers independently. Children from multiparae women showed much lower concentrations than primiparae women. Children from mothers with secondary school level exhibited lower concentrations of these pesticides than mothers with lower degree of education.     

Impact of cypermethrin on stream fish populations under field-use in biotech-soybean production

The impact of biotech-soybean technology on freshwater ecosystems is being evaluated in the Rolling Pampas region, Argentina. The effect of cypermethrin, the main soybean insecticide, on low-order temperate-stream fish populations was investigated for two consecutive crop cycles under field-use conditions in biotech-soybean production. Cypermethrin was unable to induce mortality or behavioral effects on any of the fish species resident in a first-order stream across a crop field (pulsed acute exposure scenario) sprayed according to conventional practices. No spatially or temporally dependent effects were observed on population parameters (size-class structure, abundance, survival, sex and immature/mature ratio, condition factor) of resident or caged Cnesterodon decemmaculatus after spraying or rainfall events, not even one year after, at the beginning of the next crop cycle. Although cypermethrin was "very highly toxic" to C. decemmaculatus in laboratory water (96h-LC(50)=0.43microg/l), its toxicity was reduced in filtered (78%) and unfiltered (92%) stream water. Changes in LC(50) values were mainly correlated with the OC content of each water fraction (r(2)=0.99; p<0.01; n=9), showing that both DOC and TOC contributed proportionally to toxicity reduction. Protective effects of stream water (12-fold reduction LC(50) values) explained the lack of effects on fish populations in the field, despite cypermethrin water concentrations after spraying reached values comparable with the 96h-LC(50). Therefore, cypermethrin under field-use conditions in transgenic-soybean production represents a low risk of acute exposure for fish populations inhabiting low-order temperate-streams rich in TOC. The relationship between LC(50) and TOC could be a convenient way to improve risk estimation based on laboratory toxicity testing.     

Biomonitoring spatial and temporal impact of atmospheric dust from a cement industry

The objective of this work was to evaluate the spatial and temporal impact of dust-pollution in the vicinity of a cement industry, located in an area with dry climate. The spatial impact integrated over time was evaluated from the concentrations of Ca, Fe and Mg in in-situ Xanthoria parietina. The temporal pattern was assessed through one-month transplants of the lichen Ramalina canariensis. Four potential sources of atmospheric dust were evaluated: the limestone-quarry; the unpaved roads, the deposit area and the cement mill. Calcium concentration in lichens was considered the best cement-dust indicator. Different types of dust (clinker and grinded-limestone-dust) resulted in different time-patterns of Ca accumulation, which was also related with the different influence that wet and dry periods have in the lichen accumulation process. The dust pollution was found to be deposited locally and dependent on: the nature of dust particles and the volume and frequency of precipitation.     

Organochlorine bioaccumulation and biomarkers levels in culture and wild white seabream (Diplodus sargus)

Persistent organic pollutants (POPs), which can accumulate in the adipose fish tissues, can enter the human food chain through the consumption of fish, and cause risk to health. The use of chemical analysis, and biochemical and cellular responses is a way to detect the impact of pollutants in aquatic systems. The purpose of this study was to investigate the levels of organochlorine compounds (polychlorinated biphenyls - PCB and p,p'-dichlorodiphenyltrichloroethane and its metabolites - tDDT) in, wild and cultivated, white seabream (Diplodus sargus), and also its biological effects that were evaluated by assessing the activity of biotransformation enzymes and genotoxic effects. To achieve that we have sampled five different size classes (I - 13 g, II - 64 g, III - 143 g, IV - 315 g and V - 441 g) of white seabream from a local aquaculture, and also a group of wild fish (375g) in order to compare accumulation and responses between cultured and wild fish. White seabream, cultured and wild, presented low levels of organochlorine content, both in liver and in muscle. Wild white seabream, in comparison to cultured ones at the marketable size, showed lower organochlorine accumulation. Biotransformation enzymes showed negative correlations with organochlorine levels in liver. Micronucleous numbers revealed that wild white seabream are not so exposed to genotoxic compounds as cultured ones.     

Benzo[a]pyrene degradation by Sphingomonas yanoikuyae JAR02

Batch experiments were conducted to characterize the degradation of benzo[a]pyrene, a representative high molecular weight (HMW) polycyclic aromatic hydrocarbon (PAH), by Sphingomonas yanoikuyae JAR02. Concentrations up to the solubility limit (1.2 microg l(-1)) of benzo[a]pyrene were completely removed from solution within 20 h when the bacterium was grown on salicylate. Additional experiments with [(14)C]7-benzo[a]pyrene demonstrated 3.8% mineralization over 7 days when salicylate was present is solution, and one major radio-labeled metabolite was observed that accounted for approximately 10% of the initial radio-label. Further characterization of the radio-labeled metabolite using HPLC/MS and HPLC/MS/MS identified radio-labeled pyrene-8-hydroxy-7-carboxylic acid and unlabeled pyrene-7-hydroxy-8-carboxylic acid as novel ring-cleavage metabolites, and a benzo[a]pyrene degradation pathway was proposed. Results indicate that biostimulation of HMW PAH degradation by salicylate, a water-soluble, non-toxic substrate, has significant potential for in situ bioremediation.     

Factorial analysis of the trihalomethane formation in the reaction of colloidal,hydrophobic, and transphilic fractions of DOM with free chlorine

Background, aim, and scope  

This study focuses on the factors that affect trihalomethane (THMs) formation when dissolved organic matter (DOM) fractions (colloidal, hydrophobic, and transphilic fractions) in aqueous solutions were disinfected with chlorine.