胎盘内多环芳烃分布及源解析研究

探讨多环芳烃在胎盘中的分布,并对其进行源解析。从2012年6月—2013年6月在云南省第一人民医院产科分娩的产妇中随机抽取30例,利用气相色谱-质谱联用仪(GC-MS)检测其胎盘中多环芳烃的含量;比较胎盘的中央部分和边缘部分多环芳烃含量的差异;对多环芳烃进行源解析,探讨其主要来源。胎盘中检测到多种多环芳烃成分;其中2~4个苯环的多环芳烃占总量的90%以上,尤其是萘、苊、芴、菲、蒽、芘、荧蒽的含量较高;萘、苊烯、苊、茚并(1,2,3-c,d)芘、二苯并(a,h)蒽5种多环芳烃在胎盘中央的含量高于边缘,具有显著性差异(P0.05),其他多环芳烃在胎盘中央和边缘的含量无显著性差异(P0.05)。多环芳烃源解析提示80%研究对象体内的多环芳烃主要来自石油产品的燃烧或暴露于石油产品。     

Acid-assisted hydrothermal synthesis of nanocrystalline TiO2 from titanate nanotubes: Influence of acids on the photodegradation of gaseous toluene

In order to efficiently remove volatile organic compounds (VOCs) from indoor air, onedimensional titanate nanotubes (TiNTs) were hydrothermally treated to prepare TiO₂ nanocrystals with different crystalline phases, shapes and sizes. The influences of various acids such as CH₃COOH, HNO₃, HCl, HF and H₂SO₄ used in the treatment were separately compared to optimize the performance of the TiO₂ nanocrystals. Comparedwith the strong and corrosive inorganic acids, CH₃COOH was not only safer andmore environmentally friendly, but also more efficient in promoting the photocatalytic activity of the obtained TiO₂. Itwasobserved that the anatase TiO₂ synthesized in 15 mol/L CH₃COOH solution exhibited the highest photodegradation rate of gaseous toluene (94%), exceeding that of P25 (44%) by a factor ofmore than two. The improved photocatalytic activity was attributed to the small crystallite size and surface modification by CH₃COOH. The influence of relative humidity (20%-80%) on the performance of TiO₂ nanocrystals was also studied. The anatase TiO₂ synthesized in 15 mol/L CH₃COOH solution was more tolerant tomoisture than the other TiO₂ nanocrystals and P25.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Effects of water regime,crop residues,and application rates on control of Fusarium oxysporum f. sp. cubense

Biological soil disinfestation is an effective method to control soil-borne disease by flooding and incorporating with organic amendments, but field conditions and resources sometimes limited its practical application. A laboratory experiment was conducted to develop practice guidelines on controlling Fusarium wilt, a widespread banana disease caused by Fusarium oxysporum f. sp. cubense (FOC). FOC infested soil incorporated with rice or maize straw at rates of 1.5 tons/ha and 3.0 tons/ha was incubated under flooded or water-saturated (100% water holding capacity) conditions at 30°C for 30 days. Results showed that FOC populations in the soils incorporated with either rice or maize straw rapidly reduced more than 90% in the first 15 days and then fluctuated till the end of incubation, while flooding alone without organic amendment reduced FOC populations slightly. The rapid and dramatic decrease of redox potential (down to − 350 mV) in straw-amended treatments implied that both anaerobic condition and strongly reductive soil condition would contribute to pathogen inactivation. Water-saturation combined with straw amendments had the comparable effects on reduction of FOC, indicating that flooding was not indispensable for inactivating FOC. There was no significant difference in the reduction of FOC observed in the straw amendments at between 1.5 and 3 tons/ha. Therefore, incorporating soil with straw (rice or maize straw) at a rate of 3.0 tons/ha under 100% water holding capacity or 1.5 tons/ha under flooding, would effectively alleviate banana Fusarium wilt caused by FOC after 15-day treating under 30°C.     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste(MSW). In this study, we investigated fine particles of 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of 10 μm within the fine particles. Zn–Cu, Pb–Fe and Fe–Mn–Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions(such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction(such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Sulfide elimination by intermittent nitrate dosing in sewer sediments

The formation of hydrogen sulfide in biofilms and sediments in sewer systems can cause severe pipe corrosions and health hazards, and requires expensive programs for its prevention. The aim of this study is to propose a new control strategy and the optimal condition for sulfide elimination by intermittent nitrate dosing in sewer sediments. The study was carried out based on lab-scale experiments and batch tests using real sewer sediments. The intermittent nitrate dosing mode and the optimal control condition were investigated. The results indicated that the sulfide-intermittent-elimination strategy by nitrate dosing is advantageous for controlling sulfide accumulation in sewer sediment. The oxidation–reduction potential is a sensitive indicator parameter that can reflect the control effect and the minimum N/S(nitrate/sulfide)ratio with slight excess nitrate is necessary for optimal conditions of efficient sulfide control with lower carbon source loss. The optimal control condition is feasible for the sulfide elimination in sewer systems.     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.