Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Eier der Flußseeschwalbe (Sterna hirundo) als Indikator für die aktuelle Belastung von Rhein, Weser und Elbe mit Umweltchemikalien

In 1995, common tern (Sterna hirundo) eggs from the big German rivers, the Rhine, Weser and Elbe were collected to study the contamination with organochlorines and mercury. We found distinct differences between the rivers: common tern eggs from the Rhine had higher concentrations of PCBs and HCHs, while eggs from the Elbe had higher residues of DDT, HCB and mercury. Also toxic PCB congeners had higher residue levels in the Rhine. Considering all organochlorines, samples from the Rhine also had the highest concentrations, while those from the Elbe were the lowest. With 5.7 μg×g^?1 fresh weight, the ΖCBs had a level endangering breeding success. Fish eating birds should be used as indicators of the contamination of the rivers with environmental chemicals and should be included in monitoring programmes.     

Paternity and paternal care in the polygynandrous Smith's longspur

In species where females copulate with more than one male during a single breeding attempt, males risk investing in offspring that are not their own. In the polygynandrous Smith's longspur (Calcarius pictus), females copulate sequentially with one to three males for each clutch of eggs and most of these males later assist in feeding the young. Using multilocus DNA profiling, we determined that there was mixed paternity in >75% of broods (n=31) but that few offspring (<1% of 114 nestlings) were sired by males outside the polygynandrous group. Male feeding rate increased significantly with the number of young sired, with males siring four nestlings feeding the brood at double the frequency of males siring only a single nestling. However, male Smith's longspurs appear to show a graded adjustment of paternal care in response to paternity only when other males are available to compensate for reduced care: feeding rate did not vary in relation to paternity when only one male provisioned young at the nest. There was no evidence that males could recognise their own offspring within a brood and feed them preferentially. The number of offspring sired by each male was significantly correlated with the number of days spent copulating with the attending female: on average, a male sired one offspring for every 2 days of copulatory access. If males use their access to females to estimate paternity (and thereby decide on their subsequent level of parental investment), a positive relationship is expected between the amount of female access and the subsequent feeding rate to the nestlings. Nonetheless, male feeding effort was only weakly correlated with female access and more study is needed to determine how males estimate their paternity in a brood. Received: 1 June 1997 / Accepted after revision: 1 April 1998     

The role of daytime cues in the development of magnetic orientation in a night-migrating bird

To assess the role of celestial rotation during daytime in the development of the magnetic compass course, pied flycatchers (Ficedula hypoleuca Pallas, Muscicapidae) were handraised in Latvia under various celestial and magnetic conditions. Tests were performed during autumn migration in the local geomagnetic field (50 000 nT, 73° inclination) in the absence of celestial cues. A group of birds that had never seen the sky showed a bimodal preference for the migratory southwest-northeast axis, whereas a second group that had been exposed to the natural sky from sunrise to sunset in the local geomagnetic field showed a unimodal preference for the seasonally appropriate southwesterly direction. A third group that had also been exposed to the daytime sky, but in the absence of magnetic compass information, also oriented bimodally along a southwest-northeast axis. These findings demonstrate that observing celestial rotation during daytime enables birds to choose the right end of the migratory axis for autumn migration at the Latvian test location. This transformation of axial behavior into appropriate migratory orientation, however, requires the birds to have simultaneous access to information on both celestial rotation and the geomagnetic field. Received: 19 September 1997 / Accepted after revision: 22 November 1997     

Multiscale satellite and spatial information and analysis framework in support of a large-area forest monitoring and inventory update

Many countries undertake a national forest inventory to enable statistically valid monitoring in support of national and international reporting of forest conditions and change. Canada’s National Forest Inventory (NFI) program is designed to operate on a 10-year remeasurement cycle, with an interim report produced at the 5-year mid-point. The NFI is a sample-based inventory, with approximately 18,850 2 ×2-km photo plots across the country, distributed on a 20×20-km grid of sample points; these photo plots are the primary data source for the NFI. Capacity to provide annual monitoring information is required to keep policy and decision makers apprised of current forest conditions. In this study, we implemented a multistage monitoring framework and used a Moderate Resolution Imaging Spectroradiometer (MODIS) change product to successfully identify 78% of the changes in forest cover area that were captured with a Landsat change detection approach. Of the NFI photo plots that were identified by both the Landsat and MODIS approaches as having changes in forest cover, the proportion of change area within the plots was similar (R ²?=?0.78). Approximately 70% of the Landsat-derived change events occupied less than 40% of a single MODIS pixel, and more than 90% of the change events of this size were successfully detected with the MODIS product. Finally, MODIS estimates of the proportion of forest cover change at the NFI photo plot level were comparable to change estimates for the ecoregions as a whole (R ²?=?0.95). High-temporal, low-spatial resolution imagery such as MODIS, in combination with other remotely sensed data sources, can provide information on disturbance events within a national forest inventory remeasurement cycle, thereby satisfying the interim information needs of policy and decision makers as well as the requirements of national and international reporting commitments.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.