Integrated disaster relief logistics: a stepping stone towards viable civil–military networks?

The twenty‐first century has seen a significant rise in all forms of disasters and this has resulted in military and humanitarian organisations becoming more frequently engaged in the provision of support to those affected. Achieving an efficient and effective logistic preparation and response is one of the key elements in mitigating the impact of such events, but the establishment of mechanisms to deliver an appropriately integrated civil–military approach remains elusive. Not least because of the high percentage of assistance budgets spent on logistics, this area is considered to represent fertile ground for developing improved processes and understanding. In practice, the demands placed on civilian and military logisticians are broadly similar, as is the solution space. Speaking a common language and using common concepts, it is argued, therefore, that the logistic profession should be in the vanguard of the development of an improved civil–military interface.     

Spatial variation of soil phosphorus within a drainage ditch network

Agricultural drainage ditches serve as P transport pathways from fields to surface waters. Little is known about the spatial variation of P at the soil-water interface within ditch networks. We quantified the spatial variation of surficial (0-5 cm) soil P within vegetated agricultural ditches on a farm in Princess Anne, MD with an approximately 30-yr history of poultry litter application. Ditch soils from 10 ditches were sampled at 10-m intervals and analyzed for acid ammonium oxalate-extractable P, Fe, Al (P(ox), Fe(ox), Al(ox)), and pH. These variables were spatially autocorrelated. Oxalate-P (min = 135 mg kg(-1), max = 6919 mg kg(-1), mean = 700 mg kg(-1)) exhibited a high standard deviation across the study area (overall 580 mg kg(-1)) and within individual ditches (maximum 1383 mg kg(-1)). Several ditches contained distinct areas of high P(ox), which were associated with either point- or nonpoint-P sources. Phosphorus was correlated with Al(ox) or Fe(ox) within specific ditches. Across all ditches, Al(ox) (r = 0.80; p < 0.001) was better correlated with P(ox) than was Fe(ox) (r = 0.44; p < 0.001). The high level of spatial variation of soil P observed in this ditch network suggests that spatially distributed sampling may be necessary to target best management practices and to model P transport and fate in ditch networks.     

Economically optimal nitrogen rate reduces soil residual nitrate

Post-harvest residual soil NO(3)-N (RSN) is susceptible to transfer to water resources. Practices that minimize RSN levels can reduce N loss to the environment. Our objectives were (i) to determine if the RSN after corn (Zea mays L.) harvest can be reduced if N fertilizer is applied at the economically optimal N rate (EONR) as compared to current producer practices in the midwestern USA and (ii) to compare RSN levels for N fertilizer rates below, at, and above the EONR. Six experiments were conducted in producer fields in three major soil areas (Mississippi Delta alluvial, deep loess, claypan) in Missouri over 2 yr. Predominant soil great groups were Albaqualfs, Argiudolls, Haplaquolls, and Fluvaquents. At four transects in each field, six treatment N rates from 0 to 280 kg N ha(-1) were applied, the EONR was determined, and the RSN was measured to a 0.9-m depth from five treatment plots. The EONR at sampling sites varied from 49 to 228 kg N ha(-1) depending on site and year. Estimated average RSN at the EONR was 33 kg N ha(-1) in the 0.9-m profile. This was at least 12 kg N ha(-1) lower than RSN at the producers' N rates. The RSN increased with increasing Delta EONR (total N applied - EONR). This relationship was best modeled by a plateau-linear function, with a low RSN plateau at N rates well below the EONR. A linear increase in RSN began anywhere from 65 kg N ha(-1) below the EONR to 20 kg N ha(-1) above the EONR at the three sites with good data resolution near the EONR. Applying N rates in excess of the EONR produced elevated RSN values in all six experiments. Our results suggest that applying the EONR will produce environmental benefits in an economically sound manner, and that continued attempts to develop methods for accurately predicting EONR are justified.     

Fire effects on stable isotopes in a Sierran forested watershed

This study tested the hypothesis that stable C and N isotope values in surface soil and litter would be increased by fire due to volatilization of lighter isotopes. The hypothesis was tested by: (1) performing experimental laboratory burns of organic and mineral soil materials from a watershed at combinations of temperature ranging 100 to 600 degrees C and duration ranging from 1 to 60 min; (2) testing field samples of upland soils before, shortly after, and 1 yr following a wildfire in the same watershed; and (3) testing field soil samples from a down-gradient ash/sediment depositional area in a riparian zone following a runoff event after the wildfire. Muffle furnace results indicated the most effective temperature range for using stable isotopes for tracing fire impacts is 200 to 400 degrees C because lower burn temperatures may not produce strong isotopic shifts, and at temperatures>or=600 degrees C, N and C content of residual material is too low. Analyses of field soil samples were inconclusive: there was a slightly significant effect of the wildfire on delta15N values in upland watershed analyses 1 yr postburn, while riparian zone analyses results indicated that delta13C values significantly decreased approximately 0.71 per thousand over a 9 mo post-fire period (p=0.015), and ash/sediment layer delta13C values were approximately 0.65 per thousand higher than those in the A horizon. The lack of field confirmation may have been due to overall wildfire burn temperatures being <200 degrees C and/or microbial recovery and vegetative growth in the field. Thus, the muffle furnace experiment supported the hypothesis, but it is as yet unconfirmed by actual wildfire field data.     

Environmental Equity and the Role of Public Policy: Experiences in the Rijnmond Region

This Φ Ψ study of environmental equity uses secondary quantitative data to analyze socioeconomic disparities in environmental conditions in the Rijnmond region of the Netherlands. The disparities of selected environmental indicators—exposure to traffic noise (road, rail, and air), NO₂, external safety risks, and the availability of public green space—are analyzed both separately and in combination. Not only exposures to environmental burdens (“bads”) were investigated, but also access to environmental benefits (“goods”). Additionally, we held interviews and reviewed documents to grasp the mechanisms underlying the environmental equity situation, with an emphasis on the role of public policy. Environmental equity is not a priority in public policy for the greater Rotterdam region known as the Rijnmond region, yet environmental standards have been established to provide a minimum environmental quality to all local residents. In general, environmental quality has improved in this region, and the accumulation of negative environmental outcomes (“bads”) has been limited. However, environmental standards for road traffic noise and NO₂ are being exceeded, probably because of the pressure on space and the traffic intensity. We found an association of environmental “bads” with income for rail traffic noise and availability of public green space. In the absence of regulation, positive environmental outcomes (“goods”) are mainly left up to market forces. Consequently, higher-income groups generally have more access to environmental “goods” than lower-income groups.     

Linking Models of Land Use,Resources, and Economy to Simulate the Development of Mountain Regions (ALPSCAPE)

We present a framework of a scenario-based model that simulates the development of the municipality of Davos (Swiss Alps). We illustrate our method with the calculation of the scenario for 2050 “Decrease in subsidies for mountain agriculture and liberalization of markets.” The main objective was to link submodels of land-use allocation (regression-based approach), material and energy flows submodels (Material and Energy Flux Analysis), and economic submodels (Input–Output Analysis). Letting qualitative and quantitative information flow from one submodel to the next, following the storyline describing a scenario, has proven to be suitable for linking submodels. The succession of the submodels is then strongly dependent on the scenario. Qualitative information flows are simulated with microsimulations of actor choices. Links between the submodels show different degrees of robustness: although the links involving microsimulations are the weakest, the uncertainty introduced by the land-use allocation model is actually advantageous because it allows one possible change in the landscape in the future to be simulated. The modeling results for the scenario here presented show that the disappearance of agriculture only marginally affects the region’s factor income, but that the consequences for the self-sufficiency rate, for various landscape-related indicators and ecosystem services, and for the economy in the long term may be considerable. These benefits compensate for agriculture’s modest direct economic value. The framework presented can potentially be applied to any region and scenario. This framework provides a basis for a learning package that allows potential detrimental consequences of regional development to be anticipated at an early stage.     

Adoption Potential of Conservation Agriculture Practices in Sub-Saharan Africa: Results from Five Case Studies

Despite the reported benefits of conservation agriculture (CA), its wider up-scaling in Sub-Saharan Africa (SSA) has remained fairly limited. This paper shows how a newly developed qualitative expert assessment approach for CA adoption (QAToCA) was applied to determine its adoption potential in SSA. CA adoption potential is not a predictor of observed adoption rates. Instead, our aim was to systematically check relevant factors that may be influencing its adoption. QAToCA delivers an assessment of how suitable conditions “and thus the likelihood for CA adoption” are. Results show that the high CA adoption potentials exhibited by the Malawi and Zambia case relate mostly to positive institutional factors. On the other hand, the low adoption potential of the Zimbabwe case, in spite of observed higher estimates, is attributed mainly to unstable and less secured market conditions for CA. In the case of Southern Burkina Faso, the potential for CA adoption is determined to be high, and this assessment deviates from lower observed figures. This is attributed mainly to strong competition of CA and livestock for residues in this region. Lastly, the high adoption potential found in Northern Burkina Faso is explained mainly by the fact that farmers here have no alternative other than to adopt the locally adapted CA system—Zaï farming. Results of this assessment should help promoters of CA in the given regions to reflect on their activities and to eventually adjust or redesign them based on a more explicit understanding of where problems and opportunities are found.     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.     

A Simple Model for SO2 Removal in the Duct Injection Process

Abstract

In the In-Duct Injection Process, a lime slurry is sprayed into the flue gas between the air preheater and solids collection equipment, and about 30-60 percent removal of SO₂ is achieved. A simple model of this process has been developed based on heat and mass transfer theories, and this model was fitted to the data obtained at proof-of-concept test units. Data taken with separate injection of dry lime and water were also modeled, but the SO₂ removal was less than for slurry injection, probably because of incomplete capture of lime particles by the water droplets.     

Development and Demonstration of a Pilot-Scale Debris Washing System

Metallic, masonry, and other solid debris that may be contaminated with hazardous chemicals litter numerous hazardous waste sites in the United States. Polychlorinated biphenyls (PCBs), pesticides, lead or other metals are some of the contaminants of concern. In some cases, cleanup standards have been established (e.g., 10 μg PCBs/100 cm² for surfaces to which humans may be frequently exposed). Decontaminated debris could be either returned to the site as “clean” fill or, in the case of metallic debris, sold to a metal smelter.

This project involves the development and demonstration of a technology specifically for per forming on-site decontamination of debris. Both bench-scale and pilot-scale versions of a debris washing system (DWS) have been designed, constructed, and demonstrated. The DWS entails the application of an aqueous solution during a high-pressure spray cycle, followed by turbulent wash and rinse cycles. The aqueous cleaning solution is recovered and reconditioned for reuse concurrently with the debris-cleaning process, which minimizes the quantity of process water required to clean the debris.