Adoption Potential of Conservation Agriculture Practices in Sub-Saharan Africa: Results from Five Case Studies

Despite the reported benefits of conservation agriculture (CA), its wider up-scaling in Sub-Saharan Africa (SSA) has remained fairly limited. This paper shows how a newly developed qualitative expert assessment approach for CA adoption (QAToCA) was applied to determine its adoption potential in SSA. CA adoption potential is not a predictor of observed adoption rates. Instead, our aim was to systematically check relevant factors that may be influencing its adoption. QAToCA delivers an assessment of how suitable conditions “and thus the likelihood for CA adoption” are. Results show that the high CA adoption potentials exhibited by the Malawi and Zambia case relate mostly to positive institutional factors. On the other hand, the low adoption potential of the Zimbabwe case, in spite of observed higher estimates, is attributed mainly to unstable and less secured market conditions for CA. In the case of Southern Burkina Faso, the potential for CA adoption is determined to be high, and this assessment deviates from lower observed figures. This is attributed mainly to strong competition of CA and livestock for residues in this region. Lastly, the high adoption potential found in Northern Burkina Faso is explained mainly by the fact that farmers here have no alternative other than to adopt the locally adapted CA system—Zaï farming. Results of this assessment should help promoters of CA in the given regions to reflect on their activities and to eventually adjust or redesign them based on a more explicit understanding of where problems and opportunities are found.     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.     

A Simple Model for SO2 Removal in the Duct Injection Process

Abstract

In the In-Duct Injection Process, a lime slurry is sprayed into the flue gas between the air preheater and solids collection equipment, and about 30-60 percent removal of SO₂ is achieved. A simple model of this process has been developed based on heat and mass transfer theories, and this model was fitted to the data obtained at proof-of-concept test units. Data taken with separate injection of dry lime and water were also modeled, but the SO₂ removal was less than for slurry injection, probably because of incomplete capture of lime particles by the water droplets.     

Development and Demonstration of a Pilot-Scale Debris Washing System

Metallic, masonry, and other solid debris that may be contaminated with hazardous chemicals litter numerous hazardous waste sites in the United States. Polychlorinated biphenyls (PCBs), pesticides, lead or other metals are some of the contaminants of concern. In some cases, cleanup standards have been established (e.g., 10 μg PCBs/100 cm² for surfaces to which humans may be frequently exposed). Decontaminated debris could be either returned to the site as “clean” fill or, in the case of metallic debris, sold to a metal smelter.

This project involves the development and demonstration of a technology specifically for per forming on-site decontamination of debris. Both bench-scale and pilot-scale versions of a debris washing system (DWS) have been designed, constructed, and demonstrated. The DWS entails the application of an aqueous solution during a high-pressure spray cycle, followed by turbulent wash and rinse cycles. The aqueous cleaning solution is recovered and reconditioned for reuse concurrently with the debris-cleaning process, which minimizes the quantity of process water required to clean the debris.     

Cell-free DNA fetal fraction in twin gestations in single-nucleotide polymorphism-based noninvasive prenatal screening

Objectives

The performance of noninvasive prenatal screening (NIPS) for fetal aneuploidy in twin pregnancies is dependent on the amount of placentally derived cell-free DNA, the “fetal fraction (FF),” present in maternal plasma. We report FF values in monozygotic (MZ) and dizygotic (DZ) pregnancies.

Methods

We reviewed FF in pregnancies at 10 to 20 completed weeks gestational age based on single-nucleotide polymorphism (SNP)-based NIPS where zygosity was routinely established in twin pregnancies. The cohort included 121 446 (96.3%) singleton, 1454 (1.2%) MZ, and 3161 (2.5%) DZ pregnancies. For DZ twins, individual FFs were measured.

Results

Combined FF for DZ and MZ fetuses were 35% and 26% greater than singletons, respectively. The individual FF contributions from each fetus in DZ twins were, on average, 32% less than singletons. FF in DZ twin pairs were moderately correlated (Pearson correlation coefficient.66). When a threshold of 2.8% FF was applied to define uninterpretable results, 1.7% (2102/121 446) of singletons, 0.8% (11/1454) of MZ pairs, and 5.6% (178/3161) of DZ pairs were uninterpretable.

Conclusion

For optimal aneuploidy NIPS in twin pregnancies, zygosity should be established and in DZ twins FF for both fetuses should be determined to identify those cases where results can be reliably interpreted.     

Dioxion-/Furan-’Verbrennungsprofile’ aus Hochtemperaturprozessen

Present knowledge assumes that different mechanisms acting downstream in high temperature processes lead to the formation of polychlorinated dibenzo(p)dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Concerning the 17 2,3,7,8-Cl-substituted PCDD/F congeners in particular, there is new evidence for a single-step reaction type (recently reported in this publication series, of. also parts 1 and 2). A formation based on a combination of the several mechanisms, which have been proposed and discussed since 1985, becomes more and more unlikely. Qualitatively the PCDD/F formation downstream from high temperature processes depends rather on a thermodynamically forced single reaction step, and on pure statistical distribution quantitatively. This may be a new ‘Thermostat Synthesis’ instead of ‘de novo’.     

EDTA reduces lead accumulation in Symphytum officinale L. (comfrey) roots

The addition of EDTA in phytoextraction studies has been reported to increase heavy metal accumulation in above-ground parts or to have no negative impact on the overall (root/shoot) accumulation levels in terrestrial plants. At a purely quantitative level, this study assessed the phytoextraction potential of a previously untested high-biomass terrestrial plant, Symphytum officinale L. (comfrey), in the presence of Pb and EDTA. In this hydroponic-based study, we report a small increase in shoot accumulation of Pb with EDTA but, conversely, the presence of EDTA in the nutrient medium markedly reduced the overall quantity of Pb in the plant root by at least 80%. The loss does not appear to be explained by EDTA acting alone, increased transport of Pb to the shoots, or anionic charge repulsion of the [PbEDTA]^2? complex. The elusive action and negative effect of EDTA on Pb accumulation in S. officinale provides additional reasons towards a growing trend away from the use of EDTA as a chelating agent in phytoextraction.