Air Quality Measurements from the Fresno Supersite

ABSTRACT

The Fresno Supersite intends to 1) evaluate non-routine monitoring methods, establishing their comparability with existing methods and their applicability to air quality planning, exposure assessment, and health effects studies; 2) provide a better understanding of aerosol characteristics, behavior, and sources to assist regulatory agencies in developing standards and strategies that protect public health; and 3) support studies that evaluate relationships between aerosol properties, co-factors, and observed health end-points. Supersite observables include in-situ, continuous, short-duration measurements of 1) PM_2.5, PM₁₀, and coarse (PM₁₀ minus PM_2.5) mass; 2) PM_2.5 SO₄ ^-2, NO₃ ^-, carbon, light absorption, and light extinction; 3) numbers of particles in discrete size bins ranging from 0.01 to ~10μm; 4) criteria pollutant gases (O₃, CO, NO_x); 5) reactive gases (NO₂, NO_y, HNO₃, peroxyacetyl nitrate [PAN], NH₃); and 6) single particle characterization by time-of-flight mass spectrometry. Field sampling and laboratory analysis are applied for gaseous and particulate organic compounds (light hydrocarbons, heavy hydrocarbons, carbonyls, polycyclic aromatic hydrocarbons [PAH], and other semi-volatiles), and PM_2.5 mass, elements, ions, and carbon. Observables common to other Supersites are 1) daily PM_2.5 24-hr average mass with Federal Reference Method (FRM) samplers; 2) continuous hourly and 5-min average PM_2.5 and PM₁₀ mass with beta attenuation monitors (BAM) and tapered element oscillating microbalances (TEOM); 3) PM_2.5 chemical specia-tion with a U.S. Environmental Protection Agency (EPA) speciation monitor and protocol; 4) coarse particle mass by dichotomous sampler and difference between PM₁₀ and PM_2.5 BAM and TEOM measurements; 5) coarse particle chemical composition; and 6) high sensitivity and time resolution scalar and vector wind speed, wind direction, temperature, relative humidity, barometric pressure, and solar radiation. The Fresno Supersite is coordinated with health and toxicological studies that will use these data in establishing relationships with asthma, other respiratory disease, and cardiovascular changes in human and animal subjects.     

Real-World Emissions from a Modern Production Vehicle Driven in Los Angeles

The emissions of hydrocarbons, nitric oxide, and carbon monoxide from one modern vehicle were measured using on-board instrumentation during about 350 miles of driving in Los Angeles, California. Emissions during on-road driving were compared to those obtained on dynamometers using the urban dynamometer driving schedule (UDDS). Although this study only used one driver and vehicle, tested over a relatively short distance, the analysis technique may be useful for a larger evaluation of off-cycle emissions.

The test vehicle had low warmed-up running emissions over the UDDS and for most of the on-road testing where the air-to-fuel ratio was maintained at the stoichiometric point. However, occasional heavily-loaded conditions during the on-road testing led to richerthan-stoiehiometric operation.

During these brief enrichment events, which lasted up to 29 seconds, CO emissions were increased by a factor of 2500 and HC by a factor of 40 over closed-loop stoichiometric operation. Nitrogen oxide emissions were similar during low-load stoichiometric operation and high-load enriched operation. The relatively constant gram-per-second emission rate of CO and HC observed during enriched operation suggests that such information can be combined with determinations of the frequency of enrichment for a large number of vehicles with similar calibrations to estimate the impact of the additional emissions from enrichment on emissions inventories.     

Detection and occurrence of pentachlorophenol residues in chicken liver and fat

Abstract

A method for the detection of pentachlorophenol (PCP) residues in chicken liver and fat is presented. A detection limit of 0.002 mg/kg was achieved. Recoveries from liver and fat were in the range 82–88% and 95–97%, respectively.

Low level residues of PCP were found in all 1072 liver and 723 fat samples. These levels were <0.010 mg/kg in 92.7% of the fat and 75.6% of the livers. Only 0.75% of the liver samples had PCP levels>0.1 mg/kg. None of the more toxic impurities of PCP were detected in the chicken tissues.     

Developing an anaerobic digester with external Zeolite filled column for enhancing methane production from swine manure – A feasibility study

ABSTRACT

Development of digesters with an external zeolite column facilitates the convenient removal of the zeolite with TAN, without disturbing the continuous anaerobic digestion process. A digester with an inside zeolite bed (In-Zeo) and digester without adding zeolite (No-Zeo) were employed to compare the process performance with digester with external zeolite column (EX-Zeo). The cumulative, CH₄ yields were 5% and 15% greater in the EX-Zeo, and the In-Zeo digesters respectively compared to the No-Zeo digesters. Also, the % VS reduction was 49%, 55% and 41%, respectively in the Ex-Zeo, In-Zeo and No-Zeo digesters. The results indicated that treatment with 7% zeolite during anaerobic digestion has the potential to improve biodegradation of swine manure. The addition of zeolite appeared to reduce TAN from the digestate, thereby enhancing the CH₄ yield. Zeolite could be used either internally or externally to enhance CH₄ production through anaerobic digestion of swine manure.     

Spatial Distribution of Geobacteraceae and Sulfate‐Reducing Bacteria During In Situ Bioremediation of Uranium‐Contaminated Groundwater

Analysis of the physiological status of subsurface microbial communities generally relies on the study of unattached microorganisms in the groundwater. These approaches have been employed in studies on bioremediation of uranium‐contaminated groundwater at a study site in Rifle, Colorado, in which Geobacter species typically account for over 90 percent of the microbial community in the groundwater during active uranium reduction. However, to develop efficient in situ bioremediation strategies it is necessary to know the status of sediment‐associated microorganisms as well. In order to evaluate the distribution of the natural community of Geobacter during bioremediation of uranium, subsurface sediments were packed into either passive flux meters (PFMs) or sediment columns deployed in groundwater monitoring wells prior to acetate injection during in situ biostimulation field trials. The trials were performed at the Department of Energy's (DOE's) Rifle Integrated Field Research Challenge site. Sediment samples were removed either during the peak of Fe(III) reduction or the peak of sulfate reduction over the course of two separate field experiments and preserved for microscopy. Direct cell counts using fluorescence in situ hybridization (FISH) probes targeting Geobacter species indicated that the majority of Geobacter cells were unattached during Fe(III) reduction, which typically tracks with elevated rates of uranium reduction. Similar measurements conducted during the sulfate‐reducing phase revealed the majority of Geobacter to be attached following exhaustion of more readily bioavailable forms of iron minerals. Laboratory sediment column studies confirmed observations made with sediment samples collected during field trials and indicated that during Fe(III) reduction, Geobacter species are primarily unattached (90 percent), whereas the majority of sulfate‐reducing bacteria and Geobacter species are attached to sediment surfaces when sulfate reduction is the predominant form of metabolism (75 percent and 77 percent, respectively). In addition, artificial sediment experiments showed that pure cultures of Geobacter uraniireducens, isolated from the Rifle site, were primarily unattached once Fe(III) became scarce. These results demonstrate that, although Geobacter species must directly contact Fe(III) oxides in order to reduce them, cells do not firmly attach to the sediments, which is likely an adaptive response to sparsely and heterogeneously dispersed Fe(III) minerals in the subsurface. © 2013 Wiley Periodicals, Inc.     

Detection of feral GT73 transgenic oilseed rape (Brassica napus) along railway lines on entry routes to oilseed factories in Switzerland

To obtain a reference status prior to cultivation of genetically modified oilseed rape (OSR, Brassica napus L.) in Switzerland, the occurrence of feral OSR was monitored along transportation routes and at processing sites. The focus was set on the detection of (transgenic) OSR along railway lines from the Swiss borders with Italy and France to the respective oilseed processing factories in Southern and Northern Switzerland (Ticino and region of Basel). A monitoring concept was developed to identify sites of largest risk of escape of genetically modified plants into the environment in Switzerland. Transport spillage of OSR seeds from railway goods cars particularly at risk hot spots such as switch yards and (un)loading points but also incidental and continuous spillage were considered. All OSR plants, including their hybridization partners which were collected at the respective monitoring sites were analyzed for the presence of transgenes by real-time PCR. On sampling lengths each of 4.2 and 5.7 km, respectively, 461 and 1,574 plants were sampled in Ticino and the region of Basel. OSR plants were found most frequently along the routes to the oilseed facilities, and in larger amounts on risk hot spots compared to sites of random sampling. At three locations in both monitored regions, transgenic B. napus line GT73 carrying the glyphosate resistance transgenes gox and CP4 epsps were detected (Ticino, 22 plants; in the region of Basel, 159).     

Design,Engineering, and Construction of Photosynthetic Microbial Cell Factories for Renewable Solar Fuel Production

There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H₂ production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.     

Lead-210 and Beryllium-7 fallout rates on the southeastern coast of Brazil

Total ²¹⁰Pb and ⁷Be fallout rates were measured on the coastal region of Niteroi, Brazil. The monthly depositional flux of ²¹⁰Pb and ⁷Be varied by a factor of 26, from 1.7 to 43.3 mBq cm⁻² year⁻¹ and ∼27, from 7.5 to 203.5 mBq cm⁻² year⁻¹, respectively. The relatively large oscillations in the depositional flux of ²¹⁰Pb at this study site were likely due to variations in air mass sources, while the ⁷Be fluctuations may be driven by a combination of weather conditions. Local geology could support the periodic high fluxes of ²¹⁰Pb from continental air masses, as shifting oceanic wind sources were affirmed by the uncorrelated ²¹⁰Pb and ⁷Be fallout activities and ⁷Be/²¹⁰Pb ratios. The ²¹⁰Pb atmospheric deposition was found to be in agreement with local sediment inventories, an important consideration in geochemical studies that estimate sedimentation processes.     

How global conditions impact regional agricultural production and nitrogen surpluses in the German Elbe River Basin

Agricultural land use has shifted towards more intensified production because the prices of agricultural products have increased during the past years. Just a few years ago, voluntary area set-aside was a lucrative alternative in some regions. But nowadays, land is re-cultivated again, inter alia with biomass crops. Consequently, this affects the soil and nutrient balances in agriculture. The global changes on the world markets influence agricultural production and thus the water cycle at the regional scale. In this paper, the regional developments and policy alternatives are discussed for the Elbe River Basin. The paper concludes that on average, no substantial effects of nitrogen surpluses are expected for the Elbe River Basin due to a continuing decline in animal herds. However, at the county level, nitrogen surpluses are likely to exceed the maximum threshold of 60 kg nitrogen per hectare (stipulated in the German Fertiliser Regulation) due to regional concentrations of animal production. A halving of the threshold to 30 kg per hectare shows that the marginal costs of nitrogen surplus reduction regionally exceeded 10 Euros per kilogram nitrogen.     

A risk assessment tool for contaminated sites in low-permeability fractured media

A risk assessment tool for contaminated sites in low-permeability fractured media is developed, based on simple transient and steady-state analytical solutions. The discrete fracture (DF) tool, which explicitly accounts for the transport along fractures, covers different source geometries and history (including secondary sources) and can be applied to a wide range of compounds. The tool successfully simulates published data from short duration column and field experiments. The use for risk assessment is illustrated by three typical risk assessment case studies, involving pesticides, chlorinated solvents, benzene and MTBE. The model is compared with field data and with results from a simpler approach based on an Equivalent Porous Media (EPM). Risk assessment conclusions of the DF and EPM approaches are very different due to the early breakthrough, long term tailing, and lower attenuation due to degradation associated with fractured media. While the DF tool simulates the field data, it is difficult to conclude that the DF model is superior to an EPM model because of a lack of long term monitoring data. However, better agreement with existing field data by the DF model using observed physical fracture parameters favors the use of this model over the EPM model for risk assessments.