Eier der Flußseeschwalbe (Sterna hirundo) als Indikator für die aktuelle Belastung von Rhein, Weser und Elbe mit Umweltchemikalien

In 1995, common tern (Sterna hirundo) eggs from the big German rivers, the Rhine, Weser and Elbe were collected to study the contamination with organochlorines and mercury. We found distinct differences between the rivers: common tern eggs from the Rhine had higher concentrations of PCBs and HCHs, while eggs from the Elbe had higher residues of DDT, HCB and mercury. Also toxic PCB congeners had higher residue levels in the Rhine. Considering all organochlorines, samples from the Rhine also had the highest concentrations, while those from the Elbe were the lowest. With 5.7 μg×g^?1 fresh weight, the ΖCBs had a level endangering breeding success. Fish eating birds should be used as indicators of the contamination of the rivers with environmental chemicals and should be included in monitoring programmes.     

Paternity and paternal care in the polygynandrous Smith's longspur

In species where females copulate with more than one male during a single breeding attempt, males risk investing in offspring that are not their own. In the polygynandrous Smith's longspur (Calcarius pictus), females copulate sequentially with one to three males for each clutch of eggs and most of these males later assist in feeding the young. Using multilocus DNA profiling, we determined that there was mixed paternity in >75% of broods (n=31) but that few offspring (<1% of 114 nestlings) were sired by males outside the polygynandrous group. Male feeding rate increased significantly with the number of young sired, with males siring four nestlings feeding the brood at double the frequency of males siring only a single nestling. However, male Smith's longspurs appear to show a graded adjustment of paternal care in response to paternity only when other males are available to compensate for reduced care: feeding rate did not vary in relation to paternity when only one male provisioned young at the nest. There was no evidence that males could recognise their own offspring within a brood and feed them preferentially. The number of offspring sired by each male was significantly correlated with the number of days spent copulating with the attending female: on average, a male sired one offspring for every 2 days of copulatory access. If males use their access to females to estimate paternity (and thereby decide on their subsequent level of parental investment), a positive relationship is expected between the amount of female access and the subsequent feeding rate to the nestlings. Nonetheless, male feeding effort was only weakly correlated with female access and more study is needed to determine how males estimate their paternity in a brood. Received: 1 June 1997 / Accepted after revision: 1 April 1998     

The role of daytime cues in the development of magnetic orientation in a night-migrating bird

To assess the role of celestial rotation during daytime in the development of the magnetic compass course, pied flycatchers (Ficedula hypoleuca Pallas, Muscicapidae) were handraised in Latvia under various celestial and magnetic conditions. Tests were performed during autumn migration in the local geomagnetic field (50 000 nT, 73° inclination) in the absence of celestial cues. A group of birds that had never seen the sky showed a bimodal preference for the migratory southwest-northeast axis, whereas a second group that had been exposed to the natural sky from sunrise to sunset in the local geomagnetic field showed a unimodal preference for the seasonally appropriate southwesterly direction. A third group that had also been exposed to the daytime sky, but in the absence of magnetic compass information, also oriented bimodally along a southwest-northeast axis. These findings demonstrate that observing celestial rotation during daytime enables birds to choose the right end of the migratory axis for autumn migration at the Latvian test location. This transformation of axial behavior into appropriate migratory orientation, however, requires the birds to have simultaneous access to information on both celestial rotation and the geomagnetic field. Received: 19 September 1997 / Accepted after revision: 22 November 1997     

Multiscale satellite and spatial information and analysis framework in support of a large-area forest monitoring and inventory update

Many countries undertake a national forest inventory to enable statistically valid monitoring in support of national and international reporting of forest conditions and change. Canada’s National Forest Inventory (NFI) program is designed to operate on a 10-year remeasurement cycle, with an interim report produced at the 5-year mid-point. The NFI is a sample-based inventory, with approximately 18,850 2 ×2-km photo plots across the country, distributed on a 20×20-km grid of sample points; these photo plots are the primary data source for the NFI. Capacity to provide annual monitoring information is required to keep policy and decision makers apprised of current forest conditions. In this study, we implemented a multistage monitoring framework and used a Moderate Resolution Imaging Spectroradiometer (MODIS) change product to successfully identify 78% of the changes in forest cover area that were captured with a Landsat change detection approach. Of the NFI photo plots that were identified by both the Landsat and MODIS approaches as having changes in forest cover, the proportion of change area within the plots was similar (R ²?=?0.78). Approximately 70% of the Landsat-derived change events occupied less than 40% of a single MODIS pixel, and more than 90% of the change events of this size were successfully detected with the MODIS product. Finally, MODIS estimates of the proportion of forest cover change at the NFI photo plot level were comparable to change estimates for the ecoregions as a whole (R ²?=?0.95). High-temporal, low-spatial resolution imagery such as MODIS, in combination with other remotely sensed data sources, can provide information on disturbance events within a national forest inventory remeasurement cycle, thereby satisfying the interim information needs of policy and decision makers as well as the requirements of national and international reporting commitments.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Workplace aerosol mass concentration measurement using optical particle counters

Direct-reading aerosol measurement usually uses the optical properties of airborne particles to detect and measure particle concentration. In the case of occupational hygiene, mass concentration measurement is often required. Two aerosol monitoring methods are based on the principle of light scattering: optical particle counting (OPC) and photometry. The former analyses the light scattered by a single particle, the latter by a cloud of particles. Both methods need calibration to transform the quantity of scattered light detected into particle concentration. Photometers are simpler to use and can be directly calibrated to measure mass concentration. However, their response varies not only with aerosol concentration but also with particle size distribution, which frequently contributes to biased measurement. Optical particle counters directly measure the particle number concentration and particle size that allows assessment of the particle mass provided the particles are spherical and of known density. An integrating algorithm is used to calculate the mass concentration of any conventional health-related aerosol fraction. The concentrations calculated thus have been compared with simultaneous measurements by conventional gravimetric sampling to check the possibility of field OPC calibration with real workplace aerosols with a view to further monitoring particle mass concentration. Aerosol concentrations were measured in the food industry using the OPC GRIMM? 1.108 and the CIP 10-Inhalable and CIP 10-Respirable (ARELCO?) aerosol samplers while meat sausages were being brushed and coated with calcium carbonate. Previously, the original OPC inlet had been adapted to sample inhalable aerosol. A mixed aerosol of calcium carbonate and fungi spores was present in the workplace. The OPC particle-size distribution and an estimated average particle density of both aerosol components were used to calculate the mass concentration. The inhalable and respirable aerosol fractions calculated from the OPC data are closely correlated with the results of the particle size-selective sampling using the CIP 10. Furthermore, the OPC data allow calculation of the thoracic fraction of workplace aerosol (not measured by sampling), which is interesting in the presence of allergenic particles like fungi spores. The results also show that the modified COP inlet adequately samples inhalable aerosol in the range of workplace particle-size distribution.     

Lead traceability along soil-melliferous flora-bee family-apiary products chain

Indirect measures were considered to study the lead transfer along the soil-melliferous flora-bee family-apiary products food chain. The concentrations of total and bioavailable lead in the soil were first investigated. Next, the lead level in different organs of melliferous flora and subsequently in the bee family and apiary products was measured. The results indicate a decrease in contamination as follows: honeybees > drones > propolis > wax > bee larvae > honey > royal jelly. The statistical analysis highlights the "lead pollution bioindicator" role of honeybees, honey and propolis. The risk factor parameter allows the prediction of the most impacted month and the least impacted of the melliferous season.     

Spatial modelling of the probability of obtaining a detectable concentration of ammonia in Moreton Bay, Australia

Ammonia is an important water quality variable, which in excess, can be detrimental to waterways and their ecosystems. In the Ecosystem Health Monitoring Program in South-east Queensland ammonia is monitored monthly, however, often more than 50% of the ammonia observations in Moreton Bay are below detection limit, making it difficult to draw useful inferences. In this paper a clipped Gaussian random field is used to spatially model and map the probability of detectable concentration of ammonia. The methodology is applied to the Moreton Bay samples collected in February 2005. The results suggest that for this month the oceanic impacted areas have higher probability of detectable ammonia concentration than the areas closer to the main sources of anthropogenic inputs.     

Selecting Variables for Habitat Suitability of <Emphasis Type="Italic">Asellus</Emphasis> (Crustacea,Isopoda) by Applying Input Variable Contribution Methods to Artificial Neural Network Models

This study aimed to compare different methods to analyse the contribution of individual river characteristics to predict the abundance of Asellus (Crustacea, Isopoda). Six methods which provide the relative contribution and/or the contribution profile of the input variables of artificial neural network models were therefore compared: (1) the ‘partial derivatives’ method; (2) the ‘weights’ method; (3) the ‘perturb’ method; (4) the ‘profile’ method; (5) the ‘classical stepwise’ method; (6) the ‘improved stepwise’ method. Consequently, the key variables which affect the habitat preferences of Asellus could be identified. To evaluate the performance of the artificial neural network model, the model predictions were compared with the results of a multiple linear regression analysis. The dataset consisted of 179 samples, collected over a 3-year period in the Zwalm catchment in Flanders, Belgium. Twenty-four environmental variables as well as the log-transformed abundance of Asellus were used in this study. The different contribution methods seemed to give similar results concerning the order of importance of the input variables. Nevertheless, their diverse computation led to differences in sensitivity and stability of the methods and the derived outcomes on the habitat preferences. From an ecological point of view, the environmental variables describing the stream type (width, depth, stream order and distance to mouth) were the most significant variables for Asellus in the Zwalm catchment during the period 2000–2002 for all applied methods. Indirectly, one can conclude that the water quality is not the limiting factor for the survival of Asellus in the Zwalm catchment.