A review and numerical assessment of the random walk particle tracking method

We review the basic mathematical concepts of random walk particle tracking (RWPT) and its advantages and limitations. Three different numerical approaches to overcome the local mass conservation problem of the random walk methodology are examined: (i) the interpolation method, (ii) the reflection principle, and (iii) the generalized stochastic differential equations (GSDE). Analytical solutions of the spatial moments for a two-layer system are compared to model predictions using the different techniques and results demonstrate that the interpolation method reproduces correctly average velocity, but fails to reproduce macrodispersion at higher hydraulic conductivity contrasts between the two layers. On the contrary, the reflection principle and the GSDE approach underestimate average velocity, but reproduce macrodispersion better for high contrasts. The different behavior is based on an artificial shift of mass for increasing heterogeneities for the GSDE approach and the reflection principle, whereas the interpolation method suffers from the smoothing of the dispersion tensor. The behavior of these approaches was furthermore analyzed in two-dimensional heterogeneous hydraulic conductivity fields, which are characterized by different random function models. Solute transport was simulated correctly by all three approaches for the reference fields having Gaussian structures or non-Gaussian structures with an isotropic spatial correlation, even for a variance of the natural log of hydraulic conductivity of sigma(lnK)(2)=4. However, for the non-Gaussian model with a strong anisotropic spatial correlation and a variance of sigma(lnK)(2)=2 and higher, the interpolation method was the only technique modelling solute transport correctly. Furthermore, we discuss the general applicability of random walk particle tracking in comparison to the standard transport models and conclude that in advection-dominated problems using a high spatial discretization or requiring the performance of many model runs, RWPT represents a good alternative for modelling contaminant transport.     

Combined application of conservative transport modelling and compound-specific carbon isotope analyses to assess in situ attenuation of benzene, toluene, and o-xylene

In recent years, compound specific isotope analyses (CSIA) have developed into one of the most powerful tools for the quantification of in situ biodegradation of organic contaminants. In this approach, the calculation of the extent of biodegradation of organic contaminants in aquifers is usually based on the Rayleigh equation, and thus neglects physical transport processes such as dispersion that contribute to contaminant dilution in aquifers. Here we combine compound specific isotope analyses with a conservative transport model to study the attenuation of aromatic hydrocarbons at a former gasworks site. The conservative transport model was first used to simulate concentration reductions caused by dilution at wells downgradient of a BTEX source. In a second step, the diluted concentrations, together with the available stable carbon isotope ratios and carbon fractionation factors for benzene, toluene and o-xylene were applied in the Rayleigh equation to quantify the degree of biodegradation at each of those wells. At the investigated site, where other attenuation processes such as sorption and volatilisation were proven to be negligible, the combined approach is recommended for benzene, which represents a compound for which the effect of biodegradation is comparable to or less than the effect of dilution. As demonstrated for toluene and o-xylene, the application of the Rayleigh equation alone is sufficient if dilution can be proved to be insignificant in comparison to biodegradation. The analysis also suggests that the source width and the position of the observation wells relative to the plume center line are significantly related to the degree of dilution.     

Effects of heavy-metal-contaminated soil on growth, phenology and biomass turnover of Hieracium piloselloides

The effects of low levels of heavy metals on plant growth, biomass turnover and reproduction were investigated for Hieracium pilosella. Plants were grown for 12 weeks on substrates with different concentrations of heavy metals obtained by diluting contaminated soils with silica sand. To minimize effects of other soil factors, the substrates were limed, fertilized, and well watered. The more metal-contaminated soil the substrate contained, the lower the leaf production rate and the plant mass were, and the more the phenological development was delayed. Flowering phenology was very sensitive to metals. Leaf life span was reduced at the highest and the lowest metal levels, the latter being a result of advanced seed ripening. Even if the effect of low metal levels on plant growth may be small, the delayed and reduced reproduction may have large effects at population, community and ecosystem level, and contribute to rapid evolution of metal tolerance.     

The effect of emergent macrophytes on the dynamics of sulfur species and trace metals in wetland sediments

This study focuses on the effect of plants on the biogeochemistry of sulfur species and the mobility of heavy metals in wetland sediments. Results showed that, in the presence of plants, sediments had elevated sulfate concentrations in the rhizosphere during the growing season, ranging from 0.2 to 6.20 mmol L(-1), whereas only a small difference in the sulfate profiles between vegetated and non-vegetated sediments was observed during senescence. Based on the sulfate concentration increase, the oxygen release rate from the roots to achieve the corresponding oxidation of sulfide was estimated as 0.85 g m(-2) day(-1). Evapotranspiration-induced advection is a major contributor to the transport of sulfate from the water column into the sediments, and also allows dissolved trace metals (i.e. Cd, Pb, and Zn) to be transported into the sediments and react with the acid volatile sulfide pool, resulting in the immobilization of trace metals in these sediments.     

Aquatic risk assessment of the new rice herbicide profoxydim

A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance.     

Seasonal and spatial patterns of metals at a restored copper mine site II. Copper in riparian soils and Bromus carinatus shoots

Soil and plants were sampled throughout winter and spring near a perennial stream traversing a restored mine site in a winter-rainy climate. Within 1m of an acidic reach of the stream, soil had pH 3-5 and 50-100 microg/g "bioavailable" copper (extractable with 0.01 M CaCl2). Soil 2-3 m from the stream had pH 5-8 and lower (less than 3 microg/g) bioavailable copper. "Oxide-bound" copper (extractable with 2N HCl) was 50-100 microg/g at most locations. Copper concentrations in the shoots of field-collected Bromus carinatus declined from 20 microg/g in winter to 2 microg/g in spring at all sampling sites. A similar temporal pattern was found in plants grown under controlled conditions. Thus B. carinatus has a developmental program for control of shoot copper concentration, causing a seasonally-varying pattern of copper phytoaccumulation over a large range of copper availability in the soil.     

Sleepiness among night-time drivers: relationship to blood alcohol concentration and other factors

OBJECTIVE: The study aimed to explore the distribution and correlates of subjective sleepiness among the general night-time driving population. METHODS: The survey took place in three British Columbia communities in June 2003 between 21:00 hours to 03:00 hours. Sites and vehicles were selected randomly. Surveyors obtained information on several demographic and situational variables including self-assessed degree of sleepiness and self-reported hours asleep and awake, as well as an objective measure of blood alcohol concentration obtained from a hand-held breath-testing device. RESULTS: The total compliance rate among intercepted drivers was 85%. Among the 2335 drivers responding to the questionnaire, 68.4% indicated that they were wide awake, 27.6% were somewhat sleepy, and 4.1% were very sleepy. Logistic regression quantified the independent contributions of the various factors to subjective sleepiness. Male drivers with positive blood alcohol concentrations under 50 mg% were more likely to report feeling sleepy than those with either higher or with zero blood alcohol concentration. Greater relative risk of sleepiness was also associated with being female, being under age 55, and advanced hour of night. Driving with passengers of the same gender was associated with lower reported sleepiness. CONCLUSIONS: A substantial proportion of night-time drivers are driving while sleepy, especially at late night and early morning hours. The combination of alcohol and sleepiness compounds impairment in experimental studies and deserves greater attention in crash risk studies and as a topic for public education and awareness.     

Sedimenttoxizit?t — ein inhaltlicher Schwerpunkt beim SETAC Europe 16th Annual Meeting World Forum Convention Center in Den Haag, Niederlangden, 7–11 Mai 2006

Tagungsankündigungen

Sedimenttoxizit?t — ein inhaltlicher Schwerpunkt beim SETAC Europe 16th Annual Meeting World Forum Convention Center in Den Haag, Niederlangden, 7–11 Mai 2006     

A multilevel model of emotional skills,communication performance,and task performance in teams

There is increasing research regarding the influence of emotions on teamwork. In this study, we use a multilevel approach to examine how team members' use of emotion‐related skills affects team task performance and communication performance within the team. We measured individual self‐reported emotional skills prior to team formation and then collected peer‐rated individual communication performance and independently rated team task performance eight weeks later. Although there was no influence at the individual level between emotional skills and performance, team‐level emotional skills positively predicted team task performance scores. At the cross level, team‐level emotional skills predicted individual‐level communication performance. These findings emphasize the importance of distinct team emotional skills in shaping both team performance and individual team member performance. Copyright © 2011 John Wiley & Sons, Ltd.     

Measuring implicit psychological constructs in organizational behavior: An example using psychological capital

Implicit psychological constructs are effective predictors of behavioral outcomes but are rarely used in organizational settings because of real or imagined problems with measurement validity and administration. To address these concerns, we present a means of assessing implicit constructs quickly and easily by using psychological capital as an example. Copyright © 2012 John Wiley & Sons, Ltd.