Potential of acid activated clays in the clarification of menhaden stickwater

Abstract

The primary objective of this investigation was to determine the feasibility of using acid activated clays to clarify menhaden stickwater effluent. Experiments, such as physical and chemical properties determinations, effect of changes in pH and temperature and coagulation, and coagulation followed by clay treatment were also performed to study the separation of solids in stickwater.

Analysis of the stickwater showed that it contained 4.5% crude protein, 1.4% crude fat, 6.5% total solids, 1.13% ash and 93.1% water. At a wavelength of 575 um, the sample absorbed all the light and the percent transmittance was zero. When diluted 1:100 the percent transmittance was 0.39 at the same wavelength. Measured at 25°C the sample had a viscosity of 9.0 centipoises.

The results showed that the precipitation of fat increased with increasing temperatures, while the reverse was true for protein. A pH of 4.0 gave the maximum clarification at all temperatures employed. The viscosity decreased at pH values above and below the original pH of the sample.

Among the four different acid activated clays used in this study (trade names Supact‐150, Impact‐150, Impact‐12 and Impact‐1OORR), Impact‐150 was the most effective in protein and fat precipitation, and the degree of separation of these components increased by treating stickwater with a coagulant (aluminum sulfate) prior to treatment with acid activated clay.     

dry coke quenching,air pollution and energy: a status report

Dry quenching of incandescent coke after it has been pushed from the coking ovens is a proved, reliable process that is presently being used in several industrialized countries. Foremost among dry quenching’s advantages are: (1) virtual elimination of air pollutants emitted during quenching; (2) elimination of potential water pollution associated with wet quenching; (3) improvements in the working environment; (4) saving substantial amounts of energy in usable forms; (5) producing more usable coke that is superior to wet-quenched coke. By continuously circulating inert gases through a cooling chamber that contains hot coke, dry quenching recovers waste-heat energy that can be used to produce steam, to produce electricity, to preheat combustion air, to preheat coal, to dry coal, and to preheat feed water supplied to fuel-fired boilers. The pay-out period on the capital investment (approximately $7,100,000) for an installation capable of processing 5500 tons of coke/day is less than four years.     

Fate of saline ions in a planted landfill site with leachate recirculation

Recirculation of leachate on a covered landfill site planted with willows or other highly evapotranspirative woody plants is an inexpensive option for leachate management. In our study, a closed landfill leachate recirculation system was established on a rehabilitated municipal solid waste landfill site with planted landfill cover. The main objective of the study was to evaluate the sustainability of the system with regard to high hydraulic loads of the landfill leachate on the landfill cover and high concentrations of saline ions, especially potassium (K⁺), sodium (Na⁺) and chloride (Cl^?), in leachate.The results of intensive monitoring, implemented during May 2004 and September 2007, including leachate, soil and plant samples, showed a high sustainability of the system regarding saline ions with the precipitation regime of the studied region. Saline ion concentrations in leachates varied between 132 and 2592 mg Cl^? L^?1, 69 and 1310 mg Na⁺ L^?1 and between 66 and 2156 mg K⁺ L^?1, with mean values of 1010, 632 and 686 mg L^?1, respectively. Soil salinity, measured as soil electrical conductivity (EC), remained between 0.17 and 0.38 mS cm^?1 at a depth between 0 and 90 cm. An average annual precipitation of 1000 mm provided sufficient leaching of saline ions, loaded by irrigation with landfill leachate, from the soil of the landfill cover and thus prevented possible salinity shocks to the planted willows.     

The need for a systems theory approach to road safety

In other hazardous complex socio-technical systems in society, e.g. nuclear power and aviation, systems-theoretical assumptions are considered a promising way to better understand and manage safety. In this paper, two fundamental approaches to road safety were assessed in the light of a systems theory approach. One approach, is based on a premise where individual road-users are solely responsible when crashes occur. In that case countermeasures are aimed at altering the behavior of the road-user in order to adapt him/her to the road transport system. The other approach, the so-called zero-tolerance position, or Vision Zero approach, to road safety is built around two axioms; the system must be adapted to the psychological and physical conditions and limitations of the human being and the responsibility for road safety must be shared between the road-users and the designers and professional operators of the system. It was found that the most important determinants of systems theory are basically not present in the road-user approach. However, even if the Vision Zero approach clearly takes step towards systems theory, it does leave room for articulating even more features of systems theory.     

Modeling the dynamic habitat and breeding population of Southwestern Willow Flycatcher

To aid in the management and conservation of Southwestern Willow Flycatcher (Empidonax traillii extimus, hereafter “Flycatcher”), we developed numerous models of flycatcher breeding habitat at Roosevelt Lake, AZ. For model development and testing, we compiled 10 years of flycatcher territory data that were obtained from intensive fieldwork between 1996 and 2005. We identified riparian vegetation annually in the project area from Landsat Thematic Mapper images, and extracted floodplain features from a digital elevation model. We created a novel class of temporal (i.e., multiyear) variables by characterizing the stability and variability in breeding habitat over a 6-year time interval. We used logistic regression to determine associations between environmental variables and flycatcher territory occurrence, and to test specific hypotheses. We mapped the probability of territory occurrence with a GIS and determined model accuracies with a classification table and a 10-year population database. Environmental features that were associated with breeding flycatchers included floodplain size, proximity to water, and the density, heterogeneity, age and stability of riparian vegetation. Our best model explained 79% of the variability in the flycatcher breeding population at Roosevelt Lake. The majority of predicted flycatcher habitat formed between 1996 and 2004 on an exposed lakebed ～3 years after water levels receded during a prolonged drought. A high correlation between annual reservoir levels and predicted breeding habitat (r = ?0.82) indicates that we can create and manage habitat for conservation purposes. Our predictive models quantify and assess the relative quality of flycatcher breeding habitat remotely, and can be used to evaluate the effectiveness of habitat restoration activities. Numerous techniques we developed can be used to characterize riparian vegetation and patch dynamics directly off of satellite imagery, thereby increasing its utility for conservation purposes.     

Sampling animal association networks with the gambit of the group

Ecologists increasingly use network theory to examine animal association patterns. The gambit of the group (GoG) is a simple and useful assumption for accumulating the data necessary for a network analysis. The gambit of the group implies that each animal in a group is associating with every other individual in that group. Sampling is an important issue for networks in wild populations collected assuming GoG. Due to time, effort, and resource constraints and the difficulty of tracking animals, sampled data are usually a subset of the actual network. Ecologists often use association indexes to calculate the frequency of associations between individuals. These indexes are often transformed by applying a filter to produce a binary network. We explore GoG sampling using model networks. We examine assortment at the level of the group by a single dichotomous trait, along with many other network measures, to examine the effect of different sampling regimes, and choice of filter on the accuracy and precision with which measures are estimated. We find strong support for the use of weighted, rather than filtered, network measures and show that different filters have different effects depending on the nature of the sampling. We make several practical recommendations for ecologists planning GoG sampling.     

Potential Impact of Climate Change on Hurricane Flooding Inundation,Population Affected and Property Damages in Corpus Christi1

Frey, Ashley E., Francisco Olivera, Jennifer L. Irish, Lauren M. Dunkin, James M. Kaihatu, Celso M. Ferreira, and Billy L. Edge, 2010. Potential Impact of Climate Change on Hurricane Flooding Inundation, Population Affected and Property Damages in Corpus Christi. Journal of the American Water Resources Association (JAWRA) 1–11. DOI: 10.1111/j.1752-1688.2010.00475.x Abstract: The effect of climate change on storm-surge flooding and the implications for population and structural damages on the city of Corpus Christi, Texas, was investigated. The study considered the influence of sea level rise and hurricane intensification, both influenced by climate change. Combinations of future carbon dioxide equivalent emission rates and carbon dioxide doubling sensitivities, based on findings of the Intergovernmental Panel on Climate Change, were considered to define future climate scenarios. A suite of physically based numerical models for hurricane winds and the resulting waves, surge, and morphological change at the coast were used to determine flooded areas, population affected, and property damages for Hurricanes Bret, Beulah, and a version of Carla shifted south from its original track, under present and predicted future climate conditions. A comparison of the economic damages for current climate conditions and for the 2080s climate scenario shows that, for Carla (shifted), there will be an increase in the range of $270-1,100 million; for Beulah, of $100-390 million; and, for Bret, of $30-280 million. A similar analysis was also conducted for 2030s predicted climate scenarios. Overall, the comparison of the results for the different climate conditions indicates what the destructive consequences of climate change could be, even within the somewhat short time frame of 80 years considered here.     

Sublethal impact of paraquat on the life span and parasitic behavior of Diaeretiella rapae M’Intosh

This study focuses on assessing the impact of sublethal doses of paraquat on the survival, the emergence, the life span and the parasitic behavior of Diaeretiella rapae M’Intosh (Hymenoptera: Braconidae). The impact of sublethal doses was measured at room temperature using different densities of the cabbage aphid Brevicoryne brassicae. The results reveal that the field dose of paraquat caused 100% mortality in D. rapae. The percentage emergence of D. rapae decreased from 80.5% in the control group to 71.5% when treated with the lowest concentration of paraquat. Similarly, the life span of parasitoids that emerged from the mummy treated with paraquat also decreased significantly. Oviposition capability and ovipositor thrusting frequency of D. rapae also treated with sublethal dose paraquat decreased significantly along with a shortened patch residence time in the foraging area.     

Low NOx,High Efficiency Multistaged Burner: Fuel Oil Results

A multistaged combustion burner designed for in-furnace NO_x control and high combustion efficiency is being evaluated for high nitrogen content fuel and waste incineration application in a 0.6 MW package boiler simulator. A low NO_x precombustion chamber burner has been reduced in size by approximately a factor of two (from 600 to 250 ms first-stage residence time) and coupled with (1) air staging, resulting in a three-stage configuration, and (2) natural gas fuel staging, yielding up to four stolchlometric zones. Natural gas, doped with ammonia to yield a 5.8 percent fuel nitrogen content, and distillate fuel oil, doped with pyridine to yield a 2 percent fuel nitrogen content, were used to simulate high nitrogen content fuel/waste mixtures. The multistaged burner reduced NO emissions by 85 percent from emission levels from a conventional unstaged burner mounted on a commercial package bollerTA minimum NO emission level of 110 ppm was achieved in the fuel oil tests, from a level of 765 ppm for conventional firing. This is compared with a 160 ppm minimum NO level achieved in gaseous fuel tests, from an uncontrolled level of 1000 ppm. Boiler fuel staging, or reburnlng, appears to be superior to air staging for high combustion efficiency due to its minimal fuel-rich core and second flame front in the boiler.