The occurrence of heavy metals in irrigated and non-irrigated arable soils,NW Albania

The study analysed the content of heavy metals in surface soil and sediment samples from the Bregu i Matit Plain in NW Albania in relation to irrigation in order to evaluate the soil pollution and the potential risk to human health. Evaluation of soil pollution was performed using the enrichment factor and geo-accumulation index. Contents of cadmium, chromium and nickel of irrigated soils were significantly higher than those of non-irrigated soil, while contents of lead (in three of the irrigated locations), zinc and arsenic (in one of the irrigated locations) were significantly lower. Correlation analysis (CA) and principal component analysis (PCA) indicated that the primary source of the first three metals was irrigation, and the last three metals were originated from other anthropic sources, like the use of chemicals, etc. Enrichment factor (E _f) calculation showed that irrigated soils were most enriched in cadmium, chromium, copper and nickel. Index of geo-accumulation (I _geo) revealed that arable soils of Bregu i Matit are unpolluted to moderately polluted with cadmium, chromium, copper and zinc and moderately to strongly polluted with nickel and arsenic. The presence of heavy metals in the studied soils indicates a potential risk of transfer of these elements in the food chain. Therefore, further studies on the speciation of heavy metals in the studied soils in order to evaluate their mobility are needed.     

Thirty-year trends in suspended sediment in seven Lake Erie tributaries

Sediment is an important pollutant for Lake Erie and its tributaries as a carrier of other substances and as a pollutant in its own right. Environmental managers have called for major reductions in sediment loadings in Lake Erie tributaries. In this study, 30-yr (1975-2005) datasets with daily resolution are analyzed to identify and interpret trends in sediment concentrations and loads in major US tributaries to Lake Erie. The Maumee and Sandusky Rivers in agricultural northwest Ohio show continual decreases throughout this period, but the River Raisin shows increases, especially in the last decade. The urban and forested Cuyahoga River shows little trend before 2000 but shows increases since then. The mostly forested Grand River shows strong decreases before 1995, little change thereafter until the early 2000s, and then increases. In most cases, the greatest decreases or smallest increases, depending on the river, are associated with summer and fall and with low flow conditions, whereas the smallest decreases or greatest increases are associated with the spring and with high flow conditions. Analysis of concentration-flow relationships indicates that these changes are not due to weather but reflect positive and negative anthropogenic influences. Sediment decreases in the northwestern Ohio tributaries seem to reflect the successful use of agricultural practices to reduce erosion and prevent sediment loss. Opportunities for further reductions in sediment loads and concentrations lie in better management of sediment losses during winter and spring.     

Projecting Cumulative Benefits of Multiple River Restoration Projects: An Example from the Sacramento-San Joaquin River System in California

Despite increasingly large investments, the potential ecological effects of river restoration programs are still small compared to the degree of human alterations to physical and ecological function. Thus, it is rarely possible to “restore” pre-disturbance conditions; rather restoration programs (even large, well-funded ones) will nearly always involve multiple small projects, each of which can make some modest change to selected ecosystem processes and habitats. At present, such projects are typically selected based on their attributes as individual projects (e.g., consistency with programmatic goals of the funders, scientific soundness, and acceptance by local communities), and ease of implementation. Projects are rarely prioritized (at least explicitly) based on how they will cumulatively affect ecosystem function over coming decades. Such projections require an understanding of the form of the restoration response curve, or at least that we assume some plausible relations and estimate cumulative effects based thereon. Drawing on our experience with the CALFED Bay-Delta Ecosystem Restoration Program in California, we consider potential cumulative system-wide benefits of a restoration activity extensively implemented in the region: isolating/filling abandoned floodplain gravel pits captured by rivers to reduce predation of outmigrating juvenile salmon by exotic warmwater species inhabiting the pits. We present a simple spreadsheet model to show how different assumptions about gravel pit bathymetry and predator behavior would affect the cumulative benefits of multiple pit-filling and isolation projects, and how these insights could help managers prioritize which pits to fill.     

Thoughts concerning the economic valuation of landscapes

The incorporation of economic thinking into the valuation of landscapes is still relatively new. It is an approach that yields valuable new insights and can help with prioritizing the use of scarce resources to improve and/or preserve landscapes. This paper explores and discusses the uses and limitations of economic valuation of landscapes from market failure, policy process, and theoretical and philosophical perspectives.     

Assessment of Presence of Heavy Metals and Other Pollution Burden Parameters and Their Effect on Water Quality in Benin City,Edo State

An assessment of the heavy metal content and biological pollution burden of an abattoir dumpsite, an automobile carwash, the Ikpoba River, and a private water borehole located near the abattoir dumpsite was conducted in Benin City in Southern Nigeria, during the rainy and dry seasons. The water samples’ pH was lower than the permissible values, with the river water displaying color and possessing a slight odor. Iron concentrations exceeded the permissible limits for drinking water at all four of the sampling stations in the study area, although not in samples collected from the control station, station 5, a public water borehole that is located some distance away. Lead values were higher than drinking water standards in the samples collected from stations 1 through 4, with some exceptions during the rainy season. Copper, nickel, arsenic, chromium, and aluminum were detected in three out of the four sampling stations located within the study area. However, these metals were detected at levels that were within regulatory limits. The detection of three metals (iron, lead, and zinc) within the study area at levels exceeding drinking water limits suggested that a complete cycle of movement of pollutants into the sampling stations had occurred. Significant biological presences were also detected, as the Ikpoba River water had a standard plate count (SPC) of 130 most probable number (MPN) and a 22 MPN presumptive coliform count (PCC) or 22 MPN. However, Escherichia coli (E. coli) confirmatory tests recorded less than 2 MPN in both seasons. The study has shown that the quality of water in the river may be compromised by effluent discharges from the dumpsite and the carwash channel. Therefore, this situation requires more stringent enforcement of local environmental laws and maintenance of safe distances between domestic and industrial waste sources and domestic or private water wells.     

Assisting Australian indigenous resource management and sustainable utilization of species through the use of GIS and environmental modeling techniques

Information on distribution and relative abundance of species is integral to sustainable management, especially if they are to be harvested for subsistence or commerce. In northern Australia, natural landscapes are vast, centers of population few, access is difficult, and Aboriginal resource centers and communities have limited funds and infrastructure. Consequently defining distribution and relative abundance by comprehensive ground survey is difficult and expensive. This highlights the need for simple, cheap, automated methodologies to predict the distribution of species in use, or having potential for use, in commercial enterprise. The technique applied here uses a Geographic Information System (GIS) to make predictions of probability of occurrence using an inductive modeling technique based on Bayes' theorem. The study area is in the Maningrida region, central Arnhem Land, in the Northern Territory, Australia. The species examined, Cycas arnhemica and Brachychiton diversifolius, are currently being 'wild harvested' in commercial trials, involving sale of decorative plants and use as carving wood, respectively. This study involved limited and relatively simple ground surveys requiring approximately 7 days of effort for each species. The overall model performance was evaluated using Cohen's kappa statistics. The predictive ability of the model for C. arnhemica was classified as moderate and for B. diversifolius as fair. The difference in model performance can be attributed to the pattern of distribution of these species. C. arnhemica tends to occur in a clumped distribution due to relatively short distance dispersal of its large seeds and vegetative growth from long-lived rhizomes, while B. diversifolius seeds are smaller and more widely dispersed across the landscape. The output from analysis predicts trends in species distribution that are consistent with independent on-site sampling for each species and therefore should prove useful in gauging the extent of resource availability. However, some caution needs to be applied as the models tend to over predict presence which is a function of distribution patterns and of other variables operating in the landscape such as fire histories which were not included in the model due to limited availability of data.     

The Coachella Valley Multiple Species Habitat Conservation Plan: A Decade of Delays

This article describes the history of the Coachella Valley Multiple Species Habitat Conservation Plan (CVMSHCP), in the Riverside County region of Southern California. When this collaborative biodiversity conservation planning process began, in 1994, local participants and supporters had numerous factors working in their favor. Yet, as of April 2007, nearly 13 years had passed without an approved plan. This is a common problem. Many multiple species habitat conservation plans now take more than a decade to complete, and the long duration of these processes often results in negative consequences. The CVMSHCP process became bogged down—despite strong scientific input and many political advantages—due to problematic relationships between the Plan’s local supporters, its municipal signatory parties, and officials from the state and federal wildlife agencies, particularly the regional office of the US Fish and Wildlife Service. This case study demonstrates the crucial importance of institutional structures and relationships, process management, and timeliness in habitat conservation planning. We conclude by offering several related recommendations for future HCP processes.     

An Approach for Evaluating the Effectiveness of Various Ozone Air Quality Standards for Protecting Trees

We demonstrate an approach for evaluating the level of protection attained using a variety of forms and levels of past, current, and proposed Air Quality Standards (AQSs). The U.S. Clean Air Act requires the establishment of ambient air quality standards to protect health and public welfare. However, determination of attainment of these standards is based on ambient pollutant concentrations rather than prevention of adverse effects. To determine if a given AQS protected against adverse effects on vegetation, hourly ozone concentrations were adjusted to create exposure levels that “just attain” a given standard. These exposures were used in combination with a physiologically-based tree growth model to account for the interactions of climate and ozone. In the evaluation, we used ozone concentrations from two 6-year time periods from the San Bernardino Mountains in California. There were clear differences in the level of vegetation protection achieved with the various AQSs. Based on modeled plant growth, the most effective standards were the California 8-hr average maximum of 70 ppb and a seasonal, cumulative, concentration-weighted index (SUM06), which if attained, resulted in annual growth reductions of 1% or less. Least effective was the 1-hr maximum of 120 ppb which resulted in a 7% annual reduction. We conclude that combining climate, exposure scenarios, and a process-based plant growth simulator was a useful approach for evaluating effectiveness of current or proposed air quality standards, or evaluating the form and/or level of a standard based on preventing adverse growth effects.