Environmental Impact Assessment of Polylactide(PLA)/Chicken Feathers Biocomposite Materials

The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184?×?184?×?2.2 mm³ was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLA.     

Leather Insole with Acupressure Effect: New Perspectives

Some wastes contain many reusable substances of high value. Solid leather waste is one such potential waste which can be converted into value added products. This study attempts to prepare leather insoles with acupressure effect from finished leather wastes and used leather wastes. Leather with acupressure effect (LAE) was fabricated using regenerated leather. LAE was characterized physico-chemically using Fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. Foot pressure measurements were done using LAE insoles on healthy individuals. Results proved that LAE insoles were able to increase the foot pressure of the wearer and thereby created an acupressure effect in them. Wearing of footwear with LAE insoles were beneficial compared to regular insoles. LAE possessed the required mechanical properties for insole production and it was also biodegradable in nature. The study proves that these composites could be successfully used for the production of cost-effective leather goods and therapeutic footwear. Production of useful byproducts from wastes is income generating and at the same time reduces environmental pollution and a feasible technology for waste recycling has been proved in this study.     

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH₄⁺ from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH₄⁺ reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g^?1 even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.     

A mathematical model for type II profile of concentration distribution in turbulent flows

This paper presents a mathematical model to investigate type II profile of suspension concentration distribution (i.e., the concentration profile where the maximum concentration appears at some distance above the bed surface) in a steady, uniform turbulent flow through open-channels. Starting from the mass and momentum conservation equations of two-phase flow, a theoretical model has been derived. The distribution equation is derived considering the effects of fluid lift force, drag force, particle inertia, particle–particle interactions, particle velocity fluctuations and drift diffusion. The equation is solved numerically and is compared with available experimental data as well as with other models existing in the literature. Good agreement between the observed value and computed result, and minimum error in comparison to other models indicate that the present model can be applied in predicting particle concentration distribution for type II profile for a wide range of flow conditions. The proposed model is also able to show the transition from type I profile to type II profile.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

Assessing the Influence of Social Responsibility on Reputation: An Empirical Case-Study in Agricultural Cooperatives in Spain

The attention to ethics has gradually become a concurrent topic of modern companies’ management. In the last years Social Responsibility has become a key issue in the strategic agenda of competitive agriculture cooperatives. However, reputation management has not been a visible strength in the cooperative enterprises. First of all, this work theoretically analyzes the relationship between Social Responsibility and reputation in cooperatives. Later, from a practical point of view, we carry on an empirical analysis focused on the olive oil cooperatives in the south of Spain, in the province of Jaén. With respect to the previous studies on the topic, this work reveals a main reason of interest reinforcing the role of research in addressing real problems of cooperatives. The article points out the characteristics of this kind of agribusiness and shows the importance of the adoption of a responsible orientation in fostering reputation for creating sustainable competitive advantages.     

Robust optimization evaluation of reliance on locally produced foods

While local food production may be beneficial in terms of developing the local economy and reducing greenhouse gases from transportation, sustainability strategies focused on local food production may generate their own risks due to yield variability. We have developed a robust optimization (RO) model to determine the minimum amount of land (cropland and pasture) required to grow food items that would satisfy a local population’s (accounting for gender and age) calorie and nutrient needs. This model has been applied to Boone County, Missouri, which has a population of approximately 170,000. Boone County is 1790 km², with 16% of the land defined as cropland and 30% defined as pasture. The model includes 27 nutrients from 17 potential foods that could be produced: six fruits and vegetables, five grains and six animal-sourced foods. Yield estimates are based on the predominate methods of agriculture in the USA. We first run our model assuming no variability, using the midpoint yield estimates. Then, to quantify uncertainty in yield for different food types, we use historical yield data over 10 years to estimate this variability and run our RO model under these variability estimates. We compare the two model results to illustrate the impact of data uncertainty on meeting sustainable local food for communities. Solutions suggest that nutrition needs can be met for the Boone County population within the land area defined.     

Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.