Ecotoxicological assessment of acid mine drainage: electrophysiological changes in earthworm (Aporrectodea caliginosa) and aquatic oligochaete (Lumbriculus variegatus)

Ecological health of 15 sites in two mining areas on the West Coast of the South Island, New Zealand, was assessed using a non-invasive electrophysiological technique. The conduction velocity (CV) changes in the medial giant fibres (MGF) of the terrestrial earthworm Aporrectodea caliginosa were measured on days 0, 1, 2, 4, 7, 14, and 21 following exposure to soil and/or sediment from six acid mine drainage (AMD) sites, and aquatic oligochaete Lumbriculus variegatus at 0, 3, 6, and 24 h following exposure to water from 14 AMD sites. The colour of the soil/sediments varied from red-brown to black with pH ranging from 4.46 to 7.37. The colour of AMD water samples varied from clear, black, brown to orange, and the pH ranged from 2.99 to 7.66. The CV decreased progressively in A. caliginosa exposed to most soil and sediment samples from the AMD sites (compared with controls exposed to soil from an organic farm) and this was most evident in measurements taken at 7 days. Based on the CV measurements taken on day 7, sites 3 > 2 > 1 were significantly (P < 0.05) the most toxic to earthworms. The CV of L. variegatus exposed to AMD water sampled from many sites also decreased progressively and this was significantly lower than the controls in the measurements taken at 24 h from sites 3 > 9 > 7 > 11. It is proposed that MGF CV in A. caliginosa and L. variegatus worms can be used as a non-invasive, sensitive, biomarker to monitor the toxicity of AMD sites.     

Bias from two analytical laboratories involved in a long-term air monitoring program measuring organic pollutants in the Arctic: a quality assurance/quality control assessment

Initiated in 1992, air monitoring of organic pollutants in the Canadian Arctic provided spatial and temporal trends in support of Canada's participation in the Stockholm Convention of Persistent Organic Pollutants. The specific analytical laboratory charged with this task was changed in 2002 while field sampling protocols remained unchanged. Three rounds of intensive comparison studies were conducted in 2004, 2005, and 2008 to assess data comparability between the two laboratories. Analysis was compared for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in standards, blind samples of mixed standards and extracts of real air samples. Good measurement accuracy was achieved for both laboratories when standards were analyzed. Variation of measurement accuracy over time was found for some OCPs and PCBs in standards on a random and non-systematic manner. Relatively low accuracy in analyzing blind samples was likely related to the process of sample purification. Inter-laboratory measurement differences for standards (<30%) and samples (<70%) were generally less than or comparable to those reported in a previous inter-laboratory study with 21 participating laboratories. Regression analysis showed inconsistent data comparability between the two laboratories during the initial stages of the study. These inter-laboratory differences can complicate abilities to discern long-term trends of pollutants in a given sampling site. It is advisable to maintain long-term measurements with minimal changes in sample analysis.     

What motivates employers to establish preventive management arrangements within supply chains?

This paper examines existing evidence as to the factors that prompt organisations to utilise supply chains to influence how health and safety is managed within them, with a view to shedding light on how far it serves to confirm or challenge the view that in general employers are unlikely to voluntarily pursue preventive management initiatives in the absence of external regulatory pressures. The analysis reveals a range of initiatives undertaken to utilise supply chains to support improvements in health and safety management, both at the level of individual organisations and via trade and industry bodies. It also, however, indicates that while supply chains can be used to improve how health and safety is managed within them, only in relatively narrowly defined circumstances will market-based business motivations alone serve to encourage the utilisation of this potential. It is further concluded that if policy-makers wish to see supply chains used more widely to improve standards of health and safety standards, then they need to do more than merely encourage voluntary action in this regard.     

The impact of domestic energy efficiency retrofit schemes on householder attitudes and behaviours

Retrofitting existing housing stock to improve energy efficiency is often required to meet climate mitigation, public health and fuel poverty targets. Increasing uptake and effectiveness of retrofit schemes requires understanding of their impacts on householder attitudes and behaviours. This paper reports results of a survey of 500 Kirklees householders in the UK, where the Kirklees Warm Zone scheme took place. This was a local government led city scale domestic retrofit programme that installed energy efficiency measures at no charge in over 50,000 houses. The results highlight key design features of the scheme, socio-economic and attitudinal factors that affected take-up of energy efficiency measures and impacts on behaviour and energy use after adoption. The results emphasise the role that positive feedback plays in reinforcing pro-environmental attitudes and behaviours of participants and in addressing concerns of non-participants. Our findings have implications for the design and operation of future domestic energy efficiency retrofit schemes.     

DEARS particulate matter relationships for personal,indoor, outdoor,and central site settings for a general population

This analysis provides the initial summary of PM_2.5 mass concentrations relationships for all seasons and participants for a general population in the Detroit Exposure and Aerosol Research Study (DEARS). The summary presented highlights the utility of the new methodologies applied, in addition to summarizing the particulate matter (PM) data.Results include the requirement to adjust the exposure data for monitor wearing compliance and measured environmental tobacco smoke (ETS) levels, even though the study design specified a non-smoking household. A 40% wearing compliance acceptance level was suggested as necessary to balance minimizing exposure misclassification (from poor compliance) and having sufficient data to conduct robust statistical analyses. An ETS threshold level equivalent to adding more than 1.5 μg m^?3 to the collected sample was found to be necessary to detect changes in the personal exposure factor (F_pex). It is not completely clear why such a large threshold level was necessary.Statistically significant spatial PM_2.5 gradients were identified in three of the six DEARS neighborhoods in Wayne County. These were expected, given the number of strong, localized PM sources in the Detroit (Michigan) metro area. Some residential outdoor bias levels compared with the central site at Allen Park exceeded 15%. After adjusting for ETS biases, the outdoor contributions to the personal exposure were typically larger by factors from 1.75 to 2.2 compared with those of the non-outdoor sources. The outdoor contribution was larger in the summer than in the winter, which is consistent with the fractions of time spent outdoors in the summer vs. the winter (6.7% vs. 1.1% of the time).Mean personal PM_2.5 cloud levels for the general population DEARS cohort ranged from 1.5 to 3.8 (after ETS adjustment) and were comparable to those reported previously. The personal exposure collections indoors were typically at least 13 times greater than those contributed outdoors.     

The risks of risk-based regulation: insights from the environmental policy domain

Risk-based regulation has become increasingly popular in recent years. Proponents argue that it facilitates robust governance, contributing to efficient and effective use of regulatory resources and delivering interventions in proportion to risk. Critics contend that the challenges of operationalising risk-based governance mitigate its potential benefits. In this paper we start by considering what we mean by risk-based governance and discuss some of the factors shaping the adoption of such strategies. We then consider the development and operation of risk-based approaches in the environmental policy domain, focusing specifically on the regulation of contaminated land and radioactive waste. We argue that whilst risk-based approaches can offer important benefits, they face a range of epistemic, institutional and normative challenges that can play an important role in shaping the way that organisations manage both risks to society and their own institutional risks. This has profound implications for achieving regulatory objectives and, for this paper, the environmental outcomes that the regulations are designed to deliver.     

Understanding fuelwood

The article outlines a new approach to the fuelwood problem. The best way to ensure future fuelwood supplies and simultaneously to prevent environmental degradation is to improve the management of woody biomass within existing production systems. The knowledge and techniques being practised within farming communities should be valued and built upon. The starting point is to discover local people's priority concerns and encourage tree production to meet those needs. In this way the fuelwood problem can best be tackled indirectly to achieve the required ends.     

TNT particle size distributions from detonated 155-mm howitzer rounds

To achieve sustainable range management and avoid or minimize environmental contamination, the Army needs to know the amount of explosives deposited on ranges from different munitions and how these are degraded and transported under different geological and climatic conditions. The physical form of the deposited explosives has a bearing on this problem, yet the shapes and size distributions of the explosive particles remaining after detonations are not known. We collected residues from 8 high-order and 6 low-order non-tactical detonations of TNT-filled 155-mm rounds. We found significant variation in the amount of TNT scattered from the high-order detonations, ranging from 0.00001 to 2% of the TNT in the original shell. All low-order detonations scattered percent-level amounts of TNT. We imaged thousands of TNT particles and determined the size, mass and surface-area distributions of particles collected from one high-order and one low-order detonation. For the high-order detonation, particles smaller than 1 mm contribute most of the mass and surface area of the TNT scattered. For the low-order detonation, most of the scattered TNT mass was in the form of un-heated, centimeter-sized pieces whereas most of the surface area was again from particles smaller than 1 mm. We also observed that the large pieces of TNT disintegrate readily, giving rise to many smaller particles that can quickly dissolve. We suggest picking up the large pieces of TNT before they disintegrate to become point sources of contamination.