The relationship between real-time and time-integrated coarse (2.5-10 micrm), intermodal (1-2.5 microm), and fine (<2.5 microm) particulate matter in the Los Angeles basin

A periodic review of the National Ambient Air Quality Standards for Particulate Matter by the U.S. Environmental Protection Agency (EPA) will assess the standards with respect to levels, particle size, and averaging times. Some members of the scientific community in the United States and Europe have suggested the use of PM1 instead of PM2.5 as the fine particle measurement standard. This proposed standard is intended to reduce the influence of coarse particle sources on PM2.5, because some evidence suggests that PM1-2.5 is dominated by coarse particulate matter (PM) sources. In this study, coarse (PM2.5-10), intermodal (PM1-2.5), and fine (PM2.5) mass concentrations at four different sites are measured with continuous and time-integrated sampling devices. The main objective is to compare variations in these three size ranges while considering the effects of location, sources, weather, wind speed, and wind direction. Results show strong correlations between PM1 and intermodal PM in receptor sites. The contribution of PM1-2.5 to PM2.5 is highest in the summer months, most likely due to enhanced long-range transport. Coarse PM is poorly correlated with intermodal PM. Continuous data suggest that PM1 is growing into PM1-2.5 via complex processes involving stagnation of the aerosol during high relative humidity conditions, followed by advection during daytime hours.     

Measured summertime concentrations of particulate components,Hg0, and speciated polycyclic aromatic hydrocarbons at rural sites in New York State

Daily PM2.5 samples, Hg0 and speciated polycyclic aromatic hydrocarbon (PAH) were simultaneously collected at Potsdam and Stockton site in NY during the summers of 2000 and 2001. Samples for determination of the mass concentration and chemical composition of the PM2.5 were obtained with a speciation network PM2.5 sampler. Chemical composition including trace elemental composition, water-soluble ions, and elemental carbon were analyzed. Elemental mercury and PAHs were sampled separately. Daily PM2.5 concentrations ranged from 0.47 to 53.7 microg m(-3) at the Potsdam site, and from 0.82 to 47.23 microg m(-3) at the Stockton site with large daily differences between the two sites. Potsdam consistently had lower mass values than Stockton. The greatest contributors to the PM2.5 mass (generally >0.1 microg/m(3)) were sulfate, nitrate, ammonium, and BC at both sites. Seventeen PAHs were identified at each site in 2000 and the average total concentrations were 3.2 ng/m(3) and 2.9 ng/m(3) at the Potsdam and Stockton sites, respectively. The mean vapor phase mercury concentration at the Potsdam site (2.4 +/-1.2 ng m(-3), n=93) was higher than that at the Stockton site (1.2 +/- 1.0 ng m(-3), n=60) in 2000, whereas in 2001, the average concentrations were 1.1 ng m(-3) and 1.6 ng m(-3) at the Potsdam and Stockton sites, respectively. In general, vapor phase mercury concentrations increased with increasing ambient temperature at the Stockton site in 2000. These differences in values between 2000 and 2001 can be largely explained by distinct differences in the meteorological regimes that dominated in the different years.     

Thermal degradation of fluorotelomer treated articles and related materials

This study reports the first known studies to investigate the thermal degradation of a polyester/cellulose fabric substrate ("article") treated with a fluorotelomer-based acrylic polymer under laboratory conditions conservatively representing typical combustion conditions of time, temperature, and excess air level in a municipal incinerator, with an average temperature of 1000 degrees C or greater over approximately 2s residence time. The results demonstrate that the polyester/cellulose fabric treated with a fluorotelomer-based acrylic polymer is destroyed and no detectable amount of perfluorooctanoic acid (PFOA) is formed under typical municipal incineration conditions. Therefore, textiles and paper treated with such a fluorotelomer-based acrylic polymer disposed of in municipal waste and incinerated are expected to be destroyed and not be a significant source of PFOA in the environment.     

Amazon dams and waterways: Brazil’s Tapajós Basin plans

Brazil plans to build 43 “large” dams (>30 MW) in the Tapajós Basin, ten of which are priorities for completion by 2022. Impacts include flooding indigenous lands and conservation units. The Tapajós River and two tributaries (the Juruena and Teles Pires Rivers) are also the focus of plans for waterways to transport soybeans from Mato Grosso to ports on the Amazon River. Dams would allow barges to pass rapids and waterfalls. The waterway plans require dams in a continuous chain, including the Chacorão Dam that would flood 18 700 ha of the Munduruku Indigenous Land. Protections in Brazil’s constitution and legislation and in international conventions are easily neutralized through application of “security suspensions,” as has already occurred during licensing of several dams currently under construction in the Tapajós Basin. Few are aware of “security suspensions,” resulting in little impetus to change these laws.     

A review of Yemen’s current energy situation,challenges, strategies,and prospects for using renewable energy systems

Environmental Science and Pollution Research -     

Kenneth Mellanby Review Award. Trace metal concentrations in aquatic invertebrates: why and so what?

All aquatic invertebrates take up and accumulate trace metals whether essential or not, and subsequent body concentrations of trace metals show enormous variability across metals and invertebrate taxa. Accumulated metal concentrations are interpreted in terms of different trace metal accumulation patterns, dividing accumulated metals into two components--metabolically available metal and stored detoxified metal. Crustaceans are used as examples of different accumulation patterns that will have a general applicability to all aquatic invertebrates. Toxicity is related to a threshold concentration of metabolically available metal and not to total accumulated metal concentration. The significance of accumulated metal concentrations is discussed in terms of the biological significance, including the attempted recognition of a high or low concentration, and of the applied use of aquatic invertebrates in biomonitoring programmes assessing geographical and temporal variation in trace metal bioavailabilities in aquatic systems.     

Portable X-ray fluorescence in the characterisation of arsenic contamination associated with industrial buildings at a heritage arsenic works site near Redruth,Cornwall, UK

An investigation using in situ analysis by portable X-ray fluorescence (PXRF) has shown that contamination present on industrial buildings at a heritage arsenic works site near Redruth, Cornwall, UK results from the absorption of arsenic by porous and semi-porous building materials that were in contact with arsenic-rich flue gases. Results from a preliminary survey indicate that arsenic remains locked in these materials and is being gradually leached out by weathering processes. This weathering causes general contamination of the adjacent building surfaces averaging 1845 microg g(-1) arsenic, presumably caused by evaporation of leach solutions in contact with air at the surface of the building materials. More extensive crystalline deposits were found under arches protected from dissolution and further dispersion by rain water. These deposits appeared to comprise calcium sulfate (gypsum), associated with on average between 1.2 and 6.8% m/m As. In situ PXRF proved to be highly effective in locating sources of contamination at the site and in providing data that allowed a hypotheses for the origin of this contamination to be formulated and tested in the field.     

Motivating children's cooperation to conserve forests

Forests are essential common-pool resources. Understanding children's and adolescents’ motivations for conservation is critical to improving conservation education. In 2 experiments, we investigated 1086 school-aged children and adolescents (6–16 years old) from the United States, China, and the Democratic Republic of Congo. Testing participants in groups, we assessed their motivation for conservation based on collective-risk common-pool goods games in which they were threatened with losing their endowment unless the group donation exceeded a threshold needed to maintain the forest. Extrinsic motivations, rather than intrinsic, tended to lead to successful cooperation to maintain a forest. Certainty of losing individual payoffs significantly boosted successful cooperative conservation efforts across cultures (success rates were 90.63% and 74.19% in the 2 risk-extrinsic conditions, and 43.75% in the control condition). In U.S. participants, 2 extrinsic incentives, priming discussions of the value of forests and delay of payoffs as punishment, also increased success of cooperative conservation (success rates were 97.22% and 76.92% in the 2 extrinsic-incentive conditions, and 29.19% and 30.77% in the 2 control conditions). Conservation simulations, like those we used, may allow educators to encourage forest protection by leading groups to experience successful cooperation and the extrinsic incentives needed to motivate forest conservation.