Individual-based modelling of carbon and nitrogen dynamics in soils: Parameterization and sensitivity analysis of microbial components

The fate of soil carbon and nitrogen compounds in soils in response to climate change is currently the object of significant research. In particular, there is much interest in the development of a new generation of micro-scale models of soil ecosystems processes. Crucial to the elaboration of such models is the ability to describe the growth and metabolism of small numbers of individual microorganisms, distributed in a highly heterogeneous environment. In this context, the key objective of the research described in this article was to further develop an individual-based soil organic matter model, INDISIM-SOM, first proposed a few years ago, and to assess its performance with a broader experimental data set than previously considered. INDISIM-SOM models the dynamics and evolution of carbon and nitrogen associated with organic matter in soils. The model involves a number of state variables and parameters related to soil organic matter and microbial activity, including growth and decay of microbial biomass, temporal evolutions of easily hydrolysable N, mineral N in ammonium and nitrate, CO₂ and O₂. The present article concentrates on the biotic components of the model. Simulation results demonstrate that the model can be calibrated to provide good fit to experimental data from laboratory incubation experiments performed on three different types of Mediterranean soils. In addition, analysis of the sensitivity toward its biotic parameters shows that the model is far more sensitive to some parameters, i.e., the microbial maintenance energy and the probability of random microbial death, than to others. These results suggest that, in the future, research should focus on securing better measurements of these parameters, on environmental determinants of the switch from active to dormant states, and on the causes of random cell death in soil ecosystems.     

The relevance of psychosocial maps in the study of urban districts

This pilot study proposes a social map-making method based on the link between the evaluation of the neighbourhoods and the populations residing in them. It was carried on a sample of residents of Dijon’s urban area, a French city (N = 99) divided into four groups, according to the geographical location (in the city / in the suburbs) and the social status (wealthy / disadvantaged) of their living space. The procedure is inspired by social representation gathering methods. Respondents were asked (1) to evaluate their own neighbourhood and others on two scales (social reputation and personal appreciation); (2) to evaluate populations on two similar scales; (3) to determine how these populations are spared in the different neighbourhoods. The central hypothesis of this study was that evaluations of a sector would be linked to the populations living there in the representation of the individuals. Results showed that the correlation between the evaluation of a sector and the perceived proportion of French in this sector with a good reputation is strong and positive. The method has also showed patterns of repartition in the representations of the inhabitants: while certain populations are concentrated in precise sectors, others are scattered across the territory.     

Enhanced phytoremediation: A study of mycorrhizoremediation of heavy metal–contaminated soil

Arbuscular mycorrhizal fungi (AMF) are microscopic fungi that occur naturally in soil and form a symbiosis with plant roots. By colonizing the roots, the fungus increases plant growth by making soil essential elements like zinc and phosphorus more accessible. AMF can play a role in the phytoremediation of heavy metal–contaminated soil (mycorrhizoremediation). Two research experiments were conducted to evaluate the impact of AMF on the extraction of different heavy metals (arsenic, cadmium, lead, selenium, and zinc) in contaminated soil. A grass mixture composed of Festuca rubra, Festuca eliator, Agropyron repens, and Trifolium repens was used in the experiments, and four different types of AMF were investigated: Glomus intraradices, Glomus mosseae, Glomus etunicatum, and Gigaspora gigantea. The results of the study showed that heavy metal extraction by Glomus intraradices colonized plants was the highest of all four AMF tested and was generally higher than nonmycorrhizal plants, depending on the heavy metal concentration in soil and whether it interacted with other metals in soil. However, metal extraction by AMF colonized grasses reached a plateau after an approximately two‐month period showing no further phytoaccumulation. © 2006 Wiley Periodicals, Inc.     

A comparison of injury criteria used in evaluating seats for whiplash protection

A protocol has been proposed for testing seats for whiplash protection, however injury criteria have not yet been chosen. Assuming that whiplash symptoms arise from non-physiological motions of vertebral segments, we determined the ability of proposed criteria to predict peak individual vertebral displacements. Twenty-eight volunteers were subjected to rear impacts while seated in a car seat with head restraint, mounted onto a sled. Accelerometers were used to record head and torso accelerations. The volunteer data was used as a basis for testing post-mortem human specimens (PMHS). The seat was replaced by a platform onto which was mounted each of 11 cervico-thoracic spines. An instrumented headform was mounted to the upper end of the spine. The head restraint, head-to-restraint geometry, sled, and impact pulse remained the same. Head and T1 accelerations were measured and individual vertebral sagittal (XZ) plane rotations and translations were obtained from high speed video. Proposed injury criteria (NIC, Nkm, Nte, Nd) were tested for their ability to predict average, total, and peak intervertebral displacements. PMHS specimens had chest and head X (horizontal) and Z (vertical) linear accelerations similar to volunteers whose heads hit the head restraint. The best predictors were: Nd shear and peak intervertebral posterior translation (r(2) = 0.80), Nd extension and peak extension angle (r(2) = 0.70), and Nd distraction and peak distraction (r(2) = 0.51). Therefore consideration should be given to a displacement based injury criteria such as Nd in assessment of whiplash protection devices.     

Denitrification potential in relation to lithology in five headwater riparian zones

The influence of riparian zone lithology on nitrate dynamics is poorly understood. We investigated vertical variations in potential denitrification activity in relation to the lithology and stratigraphy of five headwater riparian zones on glacial till and outwash landscapes in southern Ontario, Canada. Conductive coarse sand and gravel layers occurred in four of the five riparian areas. These layers were thin and did not extend to the field-riparian perimeter in some riparian zones, which limited their role as conduits for ground water flow. We found widespread organic-rich layers at depths ranging from 40 to 300 cm that resulted from natural floodplain processes and the burial of surface soils by rapid valley-bottom sedimentation after European settlement. The organic matter content of these layers varied considerably from 2 to 5% (relic channel deposit) to 5 to 21% (buried soils) and 30 to 62% (buried peat). Denitrification potential (DNP) was measured by the acetylene block method in sediment slurries amended with nitrate. The highest DNP rates were usually found in the top 0- to 15-cm surface soil layer in all riparian zones. However, a steep decline in DNP with depth was often absent and high DNP activity occurred in the deep organic-rich layers. Water table variations in 2000-2002 indicated that ground water only interacted frequently with riparian surface soils between late March and May, whereas subsurface organic layers that sustain considerable DNP were below the water table for most of the year. These results suggest that riparian zones with organic deposits at depth may effectively remove nitrate from ground water even when the water table does not interact with organic-rich surface soil horizons.     

Practical determination of the rheological behavior of pasty biosolids

In this paper, we demonstrate that the rheological behavior of pasty sewage sludges, regardless of origin, treatment or composition, follows a Herschel-Bulkley model. The yield stress and solid volume fraction are found to be the only two distinctive rheological characteristics of these materials. By scaling the shear rate and the shear stress with two parameters depending only on the yield stress and the solid fraction, the flow curves of 48 pasty sludges all fall along a unique dimensionless master curve. This result may be used in practice to determine, from simple, independent measurements, the rheological behavior of any pasty sludge: the yield stress can be measured with the help of the 'slump test' and the solid concentration determined from the organic and mineral matter contents. The results obtained with this technique are in very good agreement with those obtained by direct rheometry.     

Hydrochemical Buffer Assessment in Agricultural Landscapes: From Local to Catchment Scale

Non-point-source pollution of surface and groundwater is a prominent environmental issue in rural catchments, with major consequences on water supply and aquatic ecosystem quality. Among surface-water protection measures, environmental or landscape management policies support the implementation and the management of buffer zones. Although a great number of studies have focused on buffer zones, quantification of the buffer effect is still a recurring question.The purpose of this article is a critical review of the assessment of buffer-zone functioning. Our objective is to provide land planners and managers with a set of variables to assess the limits and possibilities for quantifying buffer impact at the catchment scale. We first consider the scale of the local landscape feature. The most commonly used empirical method for assessing buffers is to calculate water/nutrient budgets from inflow–outflow monitoring at the level of landscape structures. We show that several other parameters apart from mean depletion of flux can be used to describe buffer functions. Such parameters include variability, with major implication for water management. We develop a theoretical framework to clarify the assessment of the buffer effect and propose a systematic analysis taking account of temporal variability. Second, we review the current assessment of buffer effects at the catchment scale according to the theoretical framework established at the local scale. Finally, we stress the limits of direct empirical assessment at the catchment scale and, in particular, we emphasize the hierarchy in hydrological processes involved at the catchment scale: The landscape feature function is constrained by other factors (climate and geology) that are of importance at a broader spatial and temporal scale.Published on line     

Temperature and microbial activity effects on trace element leaching from metalliferous peats

Due to geochemical processes, peat soils often have elevated concentrations of trace elements, which are gradually released following drainage for agriculture. Our objectives were to use incubation temperatures to vary microbial activity in two metalliferous peats (M7 acidic peat and M3 neutral peat) from the Elba, New York region, and to use periodic leaching to assess the extent of trace element release from these soils. Dried soils were mixed with glass beads to maintain aeration, moistened, and incubated at 4, 16, 28, and 37 degrees C in 10-cm-diameter x 8-cm-tall columns. Five incubation-leaching cycles were performed, each consisting of 7.3 d of incubation (28 d for the final cycle) followed by 16 h of leaching with synthetic acid rain at 2.5 mm h(-1). Microbial activity was determined initially and after the final leaching by measuring C mineralization following glucose stimulation. Cumulative respiration results were ranked 28 > 16 > 4 > 37 degrees C, with M7 acidic peat respiration values greater than M3 neutral peat at each temperature. Initial leachate pH levels were between 2 and 4, with acidification less pronounced and shorter-lived for the M3 peat. Leachate S, dissolved organic carbon (DOC), NO3-N, and trace elements declined with successive leachings (rebounding slightly in the final M3 leachate), with concentrations typically greater in the M7 leachate. Elemental losses followed the same general ranking (28 > 16 > 4 > 37 degrees C); losses at 28 degrees C were 15 to 22% for As, Cd, Ni, and Zn from the M7 peat; losses from M3 were comparable only for Cu (1%) and Ni (19%). The correlation of respiration with S, DOC, and trace elements losses indicates that microbial processes mediated the release of trace elements in both peat soils. Neutral M3 peat pH levels limited losses of most analytes.