Selenium speciation in acidic environmental samples: application to acid rain-soil interaction at Mount Etna volcano

Speciation plays a crucial role in elemental mobility. However, trace level selenium (Se) speciation analyses in aqueous samples from acidic environments are hampered due to adsorption of the analytes (i.e. selenate, selenite) on precipitates. Such solid phases can form during pH adaptation up till now necessary for chromatographic separation. Thermodynamic calculations in this study predicted that a pH < 4 is needed to prevent precipitation of Al and Fe phases. Therefore, a speciation method with a low pH eluent that matches the natural sample pH of acid rain-soil interaction samples from Etna volcano was developed. With a mobile phase containing 20 mM ammonium citrate at pH 3, selenate and selenite could be separated in different acidic media (spiked water, rain, soil leachates) in <10 min with a LOQ of 0.2 μg L⁻¹ using ⁷⁸Se for detection. Applying this speciation analysis to study acid rain-soil interaction using synthetic rain based on H₂SO₄ and soil samples collected at the flanks of Etna volcano demonstrated the dominance of selenate over selenite in leachates from samples collected close to the volcanic craters. This suggests that competitive behavior with sulfate present in acid rain might be a key factor in Se mobilization. The developed speciation method can significantly contribute to understand Se cycling in acidic, Al/Fe rich environments.     

Synthesis of Polyurethane and Characterization of its Composites Based on Alfa Cellulose Fibers

Polyurethane (PU) based on polycaprolactone (PCL) and 4,4′ diphenyl methylene diisocyanate (MDI) was synthesized using a two-step method. The PU obtained was then blended with various amounts of cellulose extracted from alfa stems to prepare composite materials. The influence of cellulose on the thermal and mechanical properties of different composites was demonstrated by means of several characterization techniques such as Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM)…     

Report on EU guidance on groundwater monitoring developed under the common implementation strategy of the water framework directive

The establishment of high quality long-term monitoring programmes is essential if the implementation of the Water Framework Directive (WFD) is to be effective. It is recognised that monitoring can be very expensive and so guidance is needed to establish cost-effective, risk-based and targeted groundwater monitoring across Europe that enables WFD objectives to be met. In this context, the Groundwater Working Group (WGC) of the Common Implementation Strategy (CIS) of the WFD has developed recommendations aiming to implement consistent groundwater monitoring across Europe. This has been published on the internet in the form of a non-legally binding guidance document, which provides useful elements for the development and maintenance of networks at high standards and thereby provide the necessary information to assess (ground)water status, identify trends in pollutant concentrations, support establishment and assessment of programmes of measures and the effective targeting of economic resources. This paper presents this guidance document.     

Influence of hydropower dams on the composition of the suspended and riverbank sediments in the Danube

Large hydropower dams have major impacts on flow regime, sediment transport and the characteristics of water and sediment in downstream rivers. The Gabcikovo and Iron Gate dams divide the studied Danube transect (rkm 1895-795) into three parts. In the Gabcikovo Reservoir (length of 40km) only a part of the incoming suspended sediments were deposited. Contrary to this, in the much larger Iron Gate backwater zone and reservoir (length of 310km) all riverine suspended sediments were deposited within the reservoir. Subsequently, suspended sediments were transported by tributaries into the Iron Gate backwater zone. Here they were modified by fractional sedimentation before they transgressed downstream via the dams. Compared with undammed Danube sections, Iron Gate reservoir sediment and suspended matter showed higher clay contents and different K/Ga and Metal/Ga ratios. These findings emphasize the importance of reservoir-river sediment-fractionation.     

How environment and vole behaviour may impact rodenticide bromadiolone persistence in wheat baits after field controls of Arvicola terrestris?

We aimed to evaluate whether environmental factors affect the persistence of bromadiolone in baits in field treatment. Baits were distributed in three soils according to two types of distribution: (1) artificial galleries conform to agricultural practices; (2) storage cavities to mimic bait storage by voles. Persistence was evaluated for 30 days in galleries and 80 days in storage cavities in autumn and spring. The decrease of bromadiolone concentrations was described by a first-order kinetic model. In galleries, the half-lives ranged from 3.0 to 5.1 days in autumn and from 5.4 to 6.2 days in spring. The half-lives were similar between soils and seasons but the pattern of persistence differed lightly for two soils between seasons. Half-lives in storage cavities, 42.7 and 24.6 days in autumn and spring respectively, were longer than in galleries. To conclude, both soil characteristics and climatic conditions weakly influence persistence, while bait storage lengthens it dramatically.     

The European Water Framework Directive beyond 2010: let actions speak louder than words

The first generation of WFD River Basin Management Plans is now available. This is a formidable achievement and a great step towards addressing Europe's deteriorated river systems. However, plans are only words: only the actual implementation of the selected measures will result in achievement of good ecological and chemical status. The WFD Lille 2010 Conference pointed out that a lot of new, but so far unused scientific knowledge is available to improve the effectiveness of selected measures or to inspire the introduction of complementary measures. Furthermore, the complexity in terms of the functioning of the water system, its interaction with the socio-economic system and the uncertain consequences of climate change, urges a 'learning-by-doing' approach. This approach should be applied in well-designed, -coordinated and -monitored learning catchments.     

Evaluation of the best compromise between the urban air quality monitoring resolution by diffusive sampling and resource requirements

The need to collect data representative of overall urban pollution is all-important in order to monitor the population exposure. High spatial resolution monitoring using diffusive samplers allows studying of the urban pollutant distribution, thus enabling deeper investigation of their generation and diffusion mechanisms. Nevertheless, such a monitoring campaign has a certain cost. In this study we point out how to find the best compromise between the number of necessary measurements and the affordable costs for monitoring campaigns. We also describe an innovative method for the proper design of a fixed urban monitoring network by means of preliminary high spatial resolution campaigns using diffusive samplers. Four European capital cities (Dublin, Madrid, Paris and Rome) were monitored six times, each time for seven days. Benzene, toluene, ethylbenzene, xylenes (BTEX) and NO(2) concentrations were measured at 146 sites in Dublin, 293 in Madrid, 339 in Paris and 290 in Rome. Multiscale grids have been drawn which ranged in mesh size from 500 m to 2 km. The statistical processing of data produced a twofold result: the creation of isoconcentration maps with geostatistical procedures, and an algorithm aimed at locating the minimum number of sampling sites where the fixed monitoring stations should be placed. Average urban levels estimated on the basis of these selected sites differ by less than 8% from those calculated on the whole populations of the sampled points. The aim of this work is to investigate how far the resolution of a monitoring campaign of urban pollution by diffusive sampling can be reduced, thus making the monitoring less expensive in terms of human and financial resources, while preserving the same quality of the results that could be achieved with a higher resolution. We found that there is no significant loss of information when the resolution of the monitoring grid for BTEX is lowered to a mesh size of 1.85 km, that is a sampling site each 3.4 km(2), and that the minimum number of sampling sites to be used is N = 0.29 A, where A is the urban surface to be monitored (in km(2)). As the spatial distribution of NO(2) is less sensitive to the distance from the emission source than that of BTEX, this relationship could be retained as a valid lower limit for the mesh grid size also for NO(2) monitoring.     

Impact of sampling strategy on stream load estimates in till landscape of the Midwest

Accurately estimating various solute loads in streams during storms is critical to accurately determine maximum daily loads for regulatory purposes. This study investigates the impact of sampling strategy on solute load estimates in streams in the US Midwest. Three different solute types (nitrate, magnesium, and dissolved organic carbon (DOC)) and three sampling strategies are assessed. Regardless of the method, the average error on nitrate loads is higher than for magnesium or DOC loads, and all three methods generally underestimate DOC loads and overestimate magnesium loads. Increasing sampling frequency only slightly improves the accuracy of solute load estimates but generally improves the precision of load calculations. This type of investigation is critical for water management and environmental assessment so error on solute load calculations can be taken into account by landscape managers, and sampling strategies optimized as a function of monitoring objectives.     

Documentation of bioaerosol concentrations in an indoor composting facility in France

Bioaerosol concentrations were investigated in a totally indoor composting facility processing fermentable household and green wastes to assess their variability. Stationary samples were collected by filtration close to specific composting operations and then were analysed for cultivable mesophilic bacteria, thermophilic bacteria, mesophilic fungi, thermophilic fungi, endotoxins and total airborne bacteria (DAPI-staining). Indoor concentrations exceeded the background levels, between 500 and 5400 EU m(-3) for endotoxins, 10(4) and 10(6) CFU m(-3) for cultivable bacteria and generally below 10(5) CFU m(-3) for airborne cultivable fungi. No significant (p > 0.05) differences were observed between the indoor composting operations. Successive 30 minute bioaerosol samples were collected to investigate the variation of cultivable mesophilic microorganisms over the work shift. Concentrations of mesophilic bacteria and fungi varied up to 1 log unit depending on the time at which they were collected in the day. Total airborne particles, counted using an optical particle counter, were present at up to 10(8) particles m(-3) and several concentration peaks were noted. Values for total airborne bacteria were roughly 70-fold higher than cultivable bacteria. These results raise the question of the sampling strategy (duration of sampling; number of samples to be collected) used in similar studies. They provide new bioaerosol concentration data in a composting facility and suggest that the filtration sampling method might be a useful tool for exposure measurements in that occupational environment.