Forecasting the number of soil samples required to reduce remediation cost uncertainty

Sampling scheme design is an important step in the management of polluted sites. It largely controls the accuracy of remediation cost estimates. In practice, however, sampling is seldom designed to comply with a given level of remediation cost uncertainty. In this paper, we present a new technique that allows one to estimate of the number of samples that should be taken at a given stage of investigation to reach a forecasted level of accuracy. The uncertainty is expressed both in terms of volume of polluted soil and overall cost of remediation. This technique provides a flexible tool for decision makers to define the amount of investigation worth conducting from an environmental and financial perspective. The technique is based on nonlinear geostatistics (conditional simulations) to estimate the volume of soil that requires remediation and excavation and on a function allowing estimation of the total cost of remediation (including investigations). The geostatistical estimation accounts for support effect, information effect, and sampling errors. The cost calculation includes mainly investigation, excavation, remediation, and transportation. The application of the technique on a former smelting work site (lead pollution) demonstrates how the tool can be used. In this example, the forecasted volumetric uncertainty decreases rapidly for a relatively small number of samples (20-50) and then reaches a plateau (after 100 samples). The uncertainty related to the total remediation cost decreases while the expected total cost increases. Based on these forecasts, we show how a risk-prone decision maker would probably decide to take 50 additional samples while a risk-averse decision maker would take 100 samples.     

Thorium and uranium contents in human urine: influence of age and residential area

Inductively coupled plasma mass spectrometry (ICP-MS) has been used for the determination of (232)Th and (238)U in urine of unexposed Jordanian subjects living in six cities. The range of (232)Th excretion in all subjects was found to be 1.4-640 microBq d(-1) with an average of 34.8 microBq d(-1) (geometric mean 15.8 microBq d(-1)). Results showed no statistically significant correlation with age and residential area. The average value obtained is in agreement with levels considered normal in some recent publications. The average value of (238)U in all samples was found to be 3955 microBq d(-1) (geometric mean 1107 microBq d(-1)), which is higher than reported figures from Germany and India, but in agreement with those figures given in ICRP publication, number 23. The mean values of the different groups were found to be proportional to age up to 60 years. A noticeable drop is observed for subjects greater than 60 years old.     

The role of door orientation on occupant injury in a nearside impact: a CIREN, MADYMO modeling and experimental study

OBJECTIVE: This study addressed the effects of vehicle height mismatch in side impact crashes. A light truck or SUV tends to strike the door of a passenger car higher causing the upper border to lead into the occupant space. Conversely, an impact centered lower on the door, from a passenger car, causes the lower border to lead. We proposed the hypothesis that the type of injury sustained by the occupant could be related to door orientation during its intrusion into the passenger compartment. METHOD: Data on door orientation and nearside occupant injuries were collected from 125 side impact crashes reported in the CIREN database. Experimental testing was performed using a pendulum carrying a frame and a vehicle door, impacting against a USDOT SID. The frame allowed the door orientation to be changed. A model was developed in MADYMO (v 6.2) using the more biofidelic dummies, BIOSID, and SIDIIs as well as USDOT SID. RESULTS: In side impact crashes with the lower border of the door leading, 81% of occupants sustained pelvic injury, 42% suffered rib fractures, and the rate of organ injury was 0.84. With the upper border leading, 46% of occupants sustained pelvic injury, 71% sustained rib fracture, and the rate of organ injuries per case increased to 1.13. The differences in the groups with respect to pelvic injury were significant at p = 0.01, rib fracture, p = 0.10, and organ injury, p = 0.001. Experimental testing showed that when the door angle changed from lower to upper border leading, peak T4 acceleration increased by 273% and pelvic acceleration decreased by 44%. The model demonstrated that when the door angle changed from lower to upper border leading, the USDOT SID showed a 29% increase in T4 acceleration and a 57% decrease in pelvic acceleration. The BIOSID dummy demonstrated a 36% increase in T1 acceleration, a 44% increase in abdominal rib 1 deflection, a 91% increase in thoracic rib 1 deflection, and a 33% decrease in pelvic acceleration. CONCLUSIONS: These data add more insight to the problem of mismatch during side impacts, where the bumper of the striking vehicle overrides the door beam, causing the upper part of the door to lead the intrusion into the passenger compartment. Even with the same delta V and intrusion, with the upper border of the door leading, more severe chest and organ injuries resulted. This data suggests that door orientation should be considered when testing subsystems for side impact protection.     

Regional dependence of urinary uranium baseline levels in non-exposed subjects with particular reference to volunteers from Northern Italy

Knowledge of the level of natural uranium (U) in the human body is fundamental in order to estimate the potentially hazardous incorporation in accidentally exposed subjects. A constant monitoring of exposed workers needs reliable reference baseline values, which can be determined by measuring the U concentration in urine. ICPMS has proven to be a fast, reliable and highly sensitive technique for this purpose. Non-uniformity in the distribution of U levels in various regions and differences in dietary habits account for the significant regional variations of U concentration in urine in non-exposed subjects. In this paper, the determination of daily uranium urinary excretion levels in a group of 12 non-exposed subjects from Northern Italy is presented and compared to data present in the published literature and to values obtained in a larger group of German volunteers. The urinary U output values observed in the Italian subset are generally higher than the corresponding levels measured in other groups. This could be the result of a higher intake of U from liquids, as assessed by the determination of U concentration in drinking waters.     

Evaluation of soil-washing process for “unwashable” clays and silts from the palmerton zinc site

The Palmerton Zinc Site is a Superfund site in Palmerton, Pennsylvania. Its former mineral processing operations have contaminated nearby wells and soils with zinc and cadmium. Preliminary analysis of soil and dust sampling conducted in May 1991 has revealed that the dust poses a potential threat to human health. Based on the results of a previous study, which showed a high percentage of silt and clay in soils from Palmerton residential properties, it was concluded that soil washing is not likely to be a viable method to treat the soil and dust contamination in Palmerton. However, since the completion of this study, a soil-washing process for “unwashable” clays and silts has been developed. A residential soil sample from Palmerton, which had low concentrations of arsenic, cadmium, and lead, and a somewhat high concentration of zinc, was washed in a bench-scale version of this process. The results showed that the new soil-washing process for “unwashable” clays and silts may be a viable method to treat the soil and dust contamination in Palmerton, depending on the soil quality criteria concentrations selected for site cleanup.     

Natural and Artificial Functionalized Biopolyesters I. Chemoenzymatic Mediated Synthesis of Chiral Precursors

Design of optically active polymeric materials for temporary therapeutic and environmental applications requires the working-out of functionalized polymers with structures and properties adjusted to the considered applications. Biocompatibility of selected polymers is a required property in regard to the interactions between living organisms and macromolecular systems. It is therefore important to prepare highly optically active monomers and their corresponding hydrolyzable and biocompatible polymers. Bacterium Clostridium tetanomorphum is an useful source of enzymes for bioconversion and particularly in the chemoenzyrnatic route to optically active alkylmalolactonic acid esters and their optically pure stereoisomers. 3-Methylaspartase, involved in the glutamate fermentation pathway, is a very interesting enzyme, which can provide chiral precursors with high optically purity. This chemoenzymatic strategy can be used to prepare the four stereoisomers of 3-methylmalolaconic acid esters, by enzymatic resolution of natural and artificial stereoisomers of 3-methylaspartic acid. A series of 3-alkymalolactonic acid esters with alkyl equal to ethyl or isopropyl, have been also synthesized and transformed into corresponding optically active polyesters.